diff options
| author | ukw | 2012-05-23 12:49:52 +0000 |
|---|---|---|
| committer | ukw | 2012-05-23 12:49:52 +0000 |
| commit | 08f2dd9d18830e4671dd99ac04569c6dd9895b98 (patch) | |
| tree | efcb847d29b4506013cf493522e444d79cfe05a2 /irsndconfig.h | |
| parent | 1170a9866f16c73a950434cfc210d5ea593d1916 (diff) | |
| download | irmp-08f2dd9d18830e4671dd99ac04569c6dd9895b98.zip | |
version 2.1.0: corrected denon timing, new source structure
git-svn-id: svn://mikrocontroller.net/irmp@96 aeb2e35e-bfc4-4214-b83c-9e8de998ed28
Diffstat (limited to 'irsndconfig.h')
| -rw-r--r-- | irsndconfig.h | 136 |
1 files changed, 40 insertions, 96 deletions
diff --git a/irsndconfig.h b/irsndconfig.h index 7af7e8e..388820b 100644 --- a/irsndconfig.h +++ b/irsndconfig.h @@ -1,9 +1,11 @@ /*---------------------------------------------------------------------------------------------------------------------------------------------------
* irsndconfig.h
*
+ * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H!
+ *
* Copyright (c) 2010-2011 Frank Meyer - frank(at)fli4l.de
*
- * $Id: irsndconfig.h,v 1.31 2012/02/24 15:00:18 fm Exp $
+ * $Id: irsndconfig.h,v 1.36 2012/05/23 12:26:26 fm Exp $
*
* ATMEGA88 @ 8 MHz
*
@@ -14,12 +16,19 @@ *---------------------------------------------------------------------------------------------------------------------------------------------------
*/
+#ifndef _IRSNDCONFIG_H_
+#define _IRSNDCONFIG_H_
+
+#if !defined(_IRSND_H_)
+# error please include only irsnd.h, not irsndconfig.h
+#endif
+
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef F_INTERRUPTS
-#define F_INTERRUPTS 15000 // interrupts per second
+# define F_INTERRUPTS 15000 // interrupts per second
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
@@ -31,11 +40,11 @@ */
// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space
-#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes
+#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~200 bytes
#define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~100 bytes
#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes
#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes
-#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~150 bytes
+#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes
#define IRSND_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~200 bytes
// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
@@ -45,8 +54,8 @@ #define IRSND_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes
#define IRSND_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~150 bytes
#define IRSND_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes
-#define IRSND_SUPPORT_IR60_PROTOCOL 1 // IR60 (SDA2008) >= 10000 ~250 bytes
-#define IRSND_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~300 bytes
+#define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~250 bytes
+#define IRSND_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes
#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 ~150 bytes
#define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~400 bytes
@@ -64,26 +73,8 @@ #define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 DON'T CHANGE, NOT SUPPORTED YET!
#define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes
-
-/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * DO NOT CHANGE:
- *---------------------------------------------------------------------------------------------------------------------------------------------------
- */
-#define IRSND_OC2 0 // OC2
-#define IRSND_OC2A 1 // OC2A
-#define IRSND_OC2B 2 // OC2B
-#define IRSND_OC0 3 // OC0
-#define IRSND_OC0A 4 // OC0A
-#define IRSND_OC0B 5 // OC0B
-
-//PIC Microchip C18
-#define IRSND_PIC_CCP1 1 // PIC C18 RC2 = PWM1 module
-#define IRSND_PIC_CCP2 2 // PIC C18 RC1 = PWM2 module
-
-#ifndef PIC_C18 // AVR part
-
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * AVR
+ * AVR section:
*
* Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8
* IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88
@@ -91,96 +82,49 @@ * IRSND_OC0 = OC0 on ATmegas supporting OC0, e.g. ATmega162
* IRSND_OC0A = OC0A on ATmegas/ATtinys supporting OC0A, e.g. ATtiny84, ATtiny85
* IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85
- * IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ...
- * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-
-#define IRSND_OCx IRSND_OC2B // use OC2B
+#if defined(ATMEL_AVR)
+# define IRSND_OCx IRSND_OC2B // use OC2B
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * PIC C18
+ * PIC C18 section:
*
* Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ...
- * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...
+ * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-
-#else
-#define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC
+#elif defined(PIC_C18)
+# define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC
+ // change other PIC C18 specific settings:
+# define F_CPU 48000000UL // PIC frequency: set your freq here
+# define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16
+# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value
+# warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself !
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * PIC C18 - change other PIC specific settings - ignore it when using AVR
+ * ARM STM32 section:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-
-#define F_CPU 48000000UL // PIC freq.; Set you Freq here
-#define Pre_Scaler 4 // define prescaler for Timer2 e.g. 1,4,16 !!!
-#define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value
-#warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself !
-
-//Do not change lines below until you have a diffrent HW !! Example for 18F2550/18F4550
-//Setup macro for PWM used PWM module
-
-#if IRSND_OCx == IRSND_PIC_CCP2
-#define IRSND_PIN TRISCbits.TRISC1 // RC1 = PWM2
-
-#define SetDCPWM(x) SetDCPWM2(x)
-#define ClosePWM ClosePWM2
-#define OpenPWM(x) OpenPWM2(x)
-#endif
-
-#if IRSND_OCx == IRSND_PIC_CCP1
-#define IRSND_PIN TRISCbits.TRISC2 // RC2 = PWM1
-
-#define SetDCPWM(x) SetDCPWM1(x)
-#define ClosePWM ClosePWM1
-#define OpenPWM(x) OpenPWM1(x)
-#endif
-
-//Setup macro for OpenTimer with defined Pre_Scaler
-#if Pre_Scaler == 1
-#define OpenTimer OpenTimer2(TIMER_INT_OFF & T2_PS_1_1);
-#elif Pre_Scaler == 4
-#define OpenTimer OpenTimer2(TIMER_INT_OFF & T2_PS_1_4);
-#elif Pre_Scaler == 16
-#define OpenTimer OpenTimer2(TIMER_INT_OFF & T2_PS_1_16);
-#else
-#error Incorrect value for Pre_Scaler
-#endif
-
-#endif //PIC_C18
+#elif defined (ARM_STM32) // use C13 as IR input on STM32
+# define IRSND_PORT_LETTER A
+# define IRSND_BIT_NUMBER 6
+# define IRSND_TIMER_NUMBER 10
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Use Callbacks to indicate output signal or something else
+ * Other target system
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0
+#elif !defined (UNIX_OR_WINDOWS)
+# error target system not defined.
+#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * D O N O T C H A N G E T H E F O L L O W I N G L I N E S !
+ * Use Callbacks to indicate output signal or something else
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#if IRSND_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
-#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
-#undef IRSND_SUPPORT_SIEMENS_PROTOCOL
-#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!
-#endif
-
-#if IRSND_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000
-#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)
-#undef IRSND_SUPPORT_RECS80_PROTOCOL
-#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!
-#endif
-
-#if IRSND_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000
-#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)
-#undef IRSND_SUPPORT_RECS80EXT_PROTOCOL
-#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!
+#ifndef IRSND_USE_CALLBACK
+# define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0
#endif
-#if IRSND_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000
-#warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)
-#undef IRSND_SUPPORT_LEGO_PROTOCOL
-#define IRSND_SUPPORT_LEGO_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!
-#endif
+#endif // _IRSNDCONFIG_H_
|