diff options
Diffstat (limited to 'irmpconfig.h')
| -rw-r--r-- | irmpconfig.h | 31 |
1 files changed, 23 insertions, 8 deletions
diff --git a/irmpconfig.h b/irmpconfig.h index af07fb1..4507669 100644 --- a/irmpconfig.h +++ b/irmpconfig.h @@ -3,7 +3,7 @@ *
* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de
*
- * $Id: irmpconfig.h,v 1.61 2011/02/25 15:24:06 fm Exp $
+ * $Id: irmpconfig.h,v 1.63 2011/03/10 12:29:14 fm Exp $
*
* ATMEGA88 @ 8 MHz
*
@@ -19,12 +19,12 @@ /*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change F_INTERRUPTS if you change the number of interrupts per second,
- * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.
- * A value above 15000 costs additional program space, absolut maximum value is 20000.
+ * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
+ * A value above 15000 costs additional program space, absolute maximum value is 20000.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef F_INTERRUPTS
-#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 20000
+#define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
@@ -42,16 +42,19 @@ *---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-// Protocol Enable Remarks F_INTERRUPTS Program Space
+// Typical Protocols, disable here! Enable Remarks F_INTERRUPTS Program Space
#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes
#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes
#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes
-#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~150 bytes
+#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes
+
+// More Protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
+#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes
#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes
-#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes
+#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~100 bytes
#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes
#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes
@@ -129,8 +132,20 @@ #define IRMP_SUPPORT_NEC_PROTOCOL 1
#endif
+#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
+#warning NEC16 protocol needs also NEC protocol, NEC protocol enabled
+#undef IRMP_SUPPORT_NEC_PROTOCOL
+#define IRMP_SUPPORT_NEC_PROTOCOL 1
+#endif
+
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
+#warning NEC42 protocol needs also NEC protocol, NEC protocol enabled
+#undef IRMP_SUPPORT_NEC_PROTOCOL
+#define IRMP_SUPPORT_NEC_PROTOCOL 1
+#endif
+
#if F_INTERRUPTS > 20000
-#error F_INTERRUPTS too high (should be not more than 20000)
+#error F_INTERRUPTS too high (should be not greater than 20000)
#endif
#endif /* _WC_IRMPCONFIG_H_ */
|