summaryrefslogtreecommitdiff
path: root/irmpconfig.h
diff options
context:
space:
mode:
Diffstat (limited to 'irmpconfig.h')
-rw-r--r--irmpconfig.h129
1 files changed, 51 insertions, 78 deletions
diff --git a/irmpconfig.h b/irmpconfig.h
index bc5e465..db0f5e4 100644
--- a/irmpconfig.h
+++ b/irmpconfig.h
@@ -1,9 +1,11 @@
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* irmpconfig.h
*
- * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de
+ * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!
*
- * $Id: irmpconfig.h,v 1.83 2012/02/24 15:00:18 fm Exp $
+ * Copyright (c) 2009-2012 Frank Meyer - frank(at)fli4l.de
+ *
+ * $Id: irmpconfig.h,v 1.90 2012/05/23 12:26:26 fm Exp $
*
* ATMEGA88 @ 8 MHz
*
@@ -17,6 +19,10 @@
#ifndef _IRMPCONFIG_H_
#define _IRMPCONFIG_H_
+#ifndef _IRMP_H_
+# error please include only irmp.h, not irmpconfig.h
+#endif
+
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change F_INTERRUPTS if you change the number of interrupts per second,
* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
@@ -24,7 +30,7 @@
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef F_INTERRUPTS
-#define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000
+# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
@@ -39,6 +45,7 @@
*
* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
+ * You cannot enable both DENON and RUWIDO, only enable one of them.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
@@ -56,7 +63,7 @@
#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes
#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes
#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes
-#define IRMP_SUPPORT_IR60_PROTOCOL 1 // IR60 (SDA2008) >= 10000 ~300 bytes
+#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes
#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes
@@ -76,108 +83,74 @@
#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Change hardware pin here:
+ * Change hardware pin here for ATMEL AVR
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#if defined (PIC_C18) // Microchip C18 Compiler
-#include <p18cxxx.h> // main PIC18 h file
-#define IRMP_PIN PORTBbits.RB4 // use RB4 as IR input on PIC
-#define input(x) (x)
-
-#elif defined (PIC_CCS_COMPILER) // PIC CCS Compiler:
-#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC
-
-#else // AVR:
-#define IRMP_PORT PORTB
-#define IRMP_DDR DDRB
-#define IRMP_PIN PINB
-#define IRMP_BIT 6 // use PB6 as IR input on AVR
-#define input(x) ((x) & (1 << IRMP_BIT))
-#endif
+#if defined (ATMEL_AVR) // use PB6 as IR input on AVR
+# define IRMP_PORT_LETTER B
+# define IRMP_BIT_NUMBER 6
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
+ * Change hardware pin here for PIC C18 compiler
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#ifndef IRMP_LOGGING
-#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)
-#endif
+#elif defined (PIC_C18) // use RB4 as IR input on PIC
+# define IRMP_PIN PORTBbits.RB4
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Use external logging routines
- * If you enable external logging, you have also to enable IRMP_LOGGING above
+ * Change hardware pin here for PIC CCS compiler
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#ifndef IRMP_EXT_LOGGING
-#define IRMP_EXT_LOGGING 0 // 1:log, 0: do not log ;
-#endif
+#elif defined (PIC_CCS)
+# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
+ * Change hardware pin here for ARM STM32
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not (default),
+#elif defined (ARM_STM32) // use C13 as IR input on STM32
+# define IRMP_PORT_LETTER C
+# define IRMP_BIT_NUMBER 13
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Use Callbacks to indicate input signal
+ * Handling of unknown target system: DON'T CHANGE
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#define IRMP_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0
+#elif !defined (UNIX_OR_WINDOWS)
+# error target system not defined.
+#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
- * DO NOT CHANGE THE FOLLOWING LINES !
+ * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
-#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
-# warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
-# undef IRMP_SUPPORT_SIEMENS_PROTOCOL
-# define IRMP_SUPPORT_SIEMENS_PROTOCOL 0
-#endif
-
-#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000
-# warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)
-# undef IRMP_SUPPORT_RUWIDO_PROTOCOL
-# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0
-#endif
-
-#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000
-# warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)
-# undef IRMP_SUPPORT_RECS80_PROTOCOL
-# define IRMP_SUPPORT_RECS80_PROTOCOL 0
-#endif
-
-#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000
-# warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)
-# undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
-# define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0
-#endif
-
-#if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000
-# warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)
-# undef IRMP_SUPPORT_LEGO_PROTOCOL
-# define IRMP_SUPPORT_LEGO_PROTOCOL 0
-#endif
-
-#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
-# warning JVC protocol needs also NEC protocol, NEC protocol enabled
-# undef IRMP_SUPPORT_NEC_PROTOCOL
-# define IRMP_SUPPORT_NEC_PROTOCOL 1
+#ifndef IRMP_LOGGING
+# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0
#endif
-#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
-# warning NEC16 protocol needs also NEC protocol, NEC protocol enabled
-# undef IRMP_SUPPORT_NEC_PROTOCOL
-# define IRMP_SUPPORT_NEC_PROTOCOL 1
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Use external logging routines
+ * If you enable external logging, you have also to enable IRMP_LOGGING above
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_EXT_LOGGING
+# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0
#endif
-#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
-# warning NEC42 protocol needs also NEC protocol, NEC protocol enabled
-# undef IRMP_SUPPORT_NEC_PROTOCOL
-# define IRMP_SUPPORT_NEC_PROTOCOL 1
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_PROTOCOL_NAMES
+# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0
#endif
-#if F_INTERRUPTS > 20000
-#error F_INTERRUPTS too high (should be not greater than 20000)
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Use Callbacks to indicate input signal
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_USE_CALLBACK
+# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0
#endif
#endif /* _WC_IRMPCONFIG_H_ */
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 14:10:19 +0000