/*--------------------------------------------------------------------------------------------------------------------------------------------------- * irmpconfig.h * * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de * * $Id: irmpconfig.h,v 1.39 2010/08/30 15:45:27 fm Exp $ * * ATMEGA88 @ 8 MHz * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef _IRMPCONFIG_H_ #define _IRMPCONFIG_H_ /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change F_INTERRUPTS if you change the number of interrupts per second, * Normally, F_INTERRUPTS should be in the range from 10000 to 15000. * A value above 15000 costs additional program space, absolut maximum value is 20000. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS #define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change settings from 1 to 0 if you want to disable one or more decoders. * This saves program space. * * 1 enable decoder * 0 disable decoder * * The standard decoders are enabled per default. * Some less common protocols are disabled here, you need to enable them manually. * * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ // Protocol Enable Remarks F_INTERRUPTS Program Space #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes #define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON >= 10000 ~250 bytes #define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~250 bytes #define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes #define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~200 bytes #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~150 bytes #define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~150 bytes #define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // NUBERT >= 10000 ~50 bytes #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // Bang & Olufsen >= 10000 ~200 bytes #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5) #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifdef PIC_CCS_COMPILER // PIC CCS Compiler: #define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC #else // AVR: #define IRMP_PORT PORTB #define IRMP_DDR DDRB #define IRMP_PIN PINB #define IRMP_BIT 6 // use PB6 as IR input on AVR #define input(x) ((x) & (1 << IRMP_BIT)) #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef IRMP_LOGGING #define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default) #endif #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000 #warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000) #undef IRMP_SUPPORT_SIEMENS_PROTOCOL #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 #endif #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000 #warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000) #undef IRMP_SUPPORT_RECS80_PROTOCOL #define IRMP_SUPPORT_RECS80_PROTOCOL 0 #endif #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000 #warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000) #undef IRMP_SUPPORT_RECS80EXT_PROTOCOL #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 #endif #if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 #warning JVC protocol needs also NEC protocol, NEC protocol enabled #undef IRMP_SUPPORT_NEC_PROTOCOL #define IRMP_SUPPORT_NEC_PROTOCOL 1 #endif #endif /* _WC_IRMPCONFIG_H_ */