/*--------------------------------------------------------------------------------------------------------------------------------------------------- * irmpprotocols.h - irmp protocols * * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H or IRSND.H! * * Copyright (c) 2013 Frank Meyer - frank(at)fli4l.de * * $Id: irmpprotocols.h,v 1.14 2013/04/09 11:59:12 fm Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef _IRMP_PROTOCOLS_H_ #define _IRMP_PROTOCOLS_H_ #if !defined(_IRMP_H_) && !defined(_IRSND_H_) # error please include only irmp.h or irsnd.h, not irmpprotocols.h #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * IR protocols: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define IRMP_SIRCS_PROTOCOL 1 // Sony #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc. #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc) #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba #define IRMP_RC5_PROTOCOL 7 // Philips etc #define IRMP_DENON_PROTOCOL 8 // Denon, Sharp #define IRMP_RC6_PROTOCOL 9 // Philips etc #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37 #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba #define IRMP_NUBERT_PROTOCOL 13 // Nubert #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig #define IRMP_NOKIA_PROTOCOL 16 // Nokia #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset #define IRMP_FDC_PROTOCOL 18 // FDC keyboard #define IRMP_RCCAR_PROTOCOL 19 // RC Car #define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits) #define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX #define IRMP_NIKON_PROTOCOL 22 // Nikon #define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver #define IRMP_IR60_PROTOCOL 24 // IR60 (SDA2008) #define IRMP_KATHREIN_PROTOCOL 25 // Kathrein #define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial) #define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync) #define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits #define IRMP_LEGO_PROTOCOL 29 // LEGO Power Functions RC #define IRMP_THOMSON_PROTOCOL 30 // Thomson #define IRMP_BOSE_PROTOCOL 31 // BOSE #define IRMP_A1TVBOX_PROTOCOL 32 // A1 TV Box #define IRMP_ORTEK_PROTOCOL 33 // ORTEK - Hama #define IRMP_TELEFUNKEN_PROTOCOL 34 // Telefunken (1560) #define IRMP_ROOMBA_PROTOCOL 35 // iRobot Roomba vacuum cleaner #define IRMP_N_PROTOCOLS 35 // number of supported protocols /*--------------------------------------------------------------------------------------------------------------------------------------------------- * timing constants: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ // fm 22.09.2011: may not be more than 16000L, otherwise some JVC codes will not be accepted #define IRMP_TIMEOUT_TIME 15500.0e-6 // timeout after 15.5 ms darkness #define IRMP_TIMEOUT_TIME_MS 15500L // timeout after 15.5 ms darkness #if IRMP_SUPPORT_NIKON_PROTOCOL == 1 # define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!) # define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness typedef uint16_t PAUSE_LEN; # define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5) #else # if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254 typedef uint16_t PAUSE_LEN; # else typedef uint8_t PAUSE_LEN; # endif #endif #define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5) /*--------------------------------------------------------------------------------------------------------------------------------------------------- * flags of struct IRMP_PARAMETER: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01 #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02 #define IRMP_PARAM_FLAG_IS_SERIAL 0x04 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * SIRCS: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20 #define SIRCS_STOP_BIT 0 // has no stop bit #define SIRCS_LSB 1 // LSB...MSB #define SIRCS_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * NEC & NEC42 & NEC16: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms #define NEC_ADDRESS_OFFSET 0 // skip 0 bits #define NEC_ADDRESS_LEN 16 // read 16 address bits #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address) #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command) #define NEC_COMPLETE_DATA_LEN 32 // complete length #define NEC_STOP_BIT 1 // has stop bit #define NEC_LSB 1 // LSB...MSB #define NEC_FLAGS 0 // flags #define NEC42_ADDRESS_OFFSET 0 // skip 0 bits #define NEC42_ADDRESS_LEN 13 // read 13 address bits #define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits) #define NEC42_COMMAND_LEN 8 // read 8 command bits #define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8) #define NEC16_ADDRESS_OFFSET 0 // skip 0 bits #define NEC16_ADDRESS_LEN 8 // read 8 address bits #define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address) #define NEC16_COMMAND_LEN 8 // read 8 bits (8 command) #define NEC16_COMPLETE_DATA_LEN 16 // complete length /*--------------------------------------------------------------------------------------------------------------------------------------------------- * SAMSUNG & SAMSUNG32: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse #define SAMSUNG_1_PAUSE_TIME 1650.0e-6 // 1650 usec pause #define SAMSUNG_0_PAUSE_TIME 550.0e-6 // 550 usec pause #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit #define SAMSUNG_ID_LEN 4 // read 4 id bits #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length #define SAMSUNG_STOP_BIT 1 // has stop bit #define SAMSUNG_LSB 1 // LSB...MSB? #define SAMSUNG_FLAGS 0 // flags #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length #define SAMSUNG32_FRAMES 1 // SAMSUNG32 sends each frame 1 times #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms /*--------------------------------------------------------------------------------------------------------------------------------------------------- * MATSUSHITA: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command) #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length #define MATSUSHITA_STOP_BIT 1 // has stop bit #define MATSUSHITA_LSB 1 // LSB...MSB? #define MATSUSHITA_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * KASEIKYO: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause #define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre) #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id) #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length #define KASEIKYO_STOP_BIT 1 // has stop bit #define KASEIKYO_LSB 1 // LSB...MSB? #define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times #define KASEIKYO_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * RECS80: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms #define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit) #define RECS80_ADDRESS_LEN 3 // read 3 address bits #define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address) #define RECS80_COMMAND_LEN 6 // read 6 command bits #define RECS80_COMPLETE_DATA_LEN 10 // complete length #define RECS80_STOP_BIT 1 // has stop bit #define RECS80_LSB 0 // MSB...LSB #define RECS80_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * RC5: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause #define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms #define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start) #define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address) #define RC5_COMMAND_LEN 6 // read 6 command bits #define RC5_COMPLETE_DATA_LEN 13 // complete length #define RC5_STOP_BIT 0 // has no stop bit #define RC5_LSB 0 // MSB...LSB #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * DENON: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory #define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory #define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory #define DENON_FRAMES 2 // DENON sends each frame 2 times #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms #define DENON_FRAME_REPEAT_PAUSE_TIME 130.0e-3 // frame repeat after 2 * 65ms #define DENON_ADDRESS_OFFSET 0 // skip 0 bits #define DENON_ADDRESS_LEN 5 // read 5 address bits #define DENON_COMMAND_OFFSET 5 // skip 5 #define DENON_COMMAND_LEN 10 // read 10 command bits #define DENON_COMPLETE_DATA_LEN 15 // complete length #define DENON_STOP_BIT 1 // has stop bit #define DENON_LSB 0 // MSB...LSB #define DENON_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * RC6: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit #define RC6_ADDRESS_LEN 8 // read 8 address bits #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address) #define RC6_COMMAND_LEN 8 // read 8 command bits #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length #define RC6_STOP_BIT 0 // has no stop bit #define RC6_LSB 0 // MSB...LSB #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * RECS80EXT: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) #define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address) #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length #define RECS80EXT_STOP_BIT 1 // has stop bit #define RECS80EXT_LSB 0 // MSB...LSB #define RECS80EXT_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * NUBERT: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause #define NUBERT_FRAMES 2 // Nubert sends 2 frames #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits #define NUBERT_ADDRESS_LEN 0 // read 0 address bits #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits #define NUBERT_COMMAND_LEN 10 // read 10 bits #define NUBERT_COMPLETE_DATA_LEN 10 // complete length #define NUBERT_STOP_BIT 1 // has stop bit #define NUBERT_LSB 0 // MSB? #define NUBERT_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * BANG_OLUFSEN: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit) #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit) #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4 #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit #define BANG_OLUFSEN_LSB 0 // MSB...LSB #define BANG_OLUFSEN_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * GRUNDIG & NOKIA *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause #define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit #define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms #define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit #define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB #define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms #define GRUNDIG_ADDRESS_OFFSET 0 // no address #define GRUNDIG_ADDRESS_LEN 0 // no address #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits) #define NOKIA_ADDRESS_LEN 8 // 7 address bits #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit) #define NOKIA_COMMAND_LEN 8 // read 8 command bits #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits /*--------------------------------------------------------------------------------------------------------------------------------------------------- * IR60: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define IR60_FRAMES 2 // IR60 sends each frame 1+1 times #define IR60_AUTO_REPETITION_PAUSE_TIME 22.2e-3 // repetition after 22.2ms #define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60 #define IR60_ADDRESS_OFFSET 0 // skip 1 bits #define IR60_ADDRESS_LEN 0 // read 0 address bits #define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1) #define IR60_COMMAND_LEN 7 // read 6 command bits #define IR60_COMPLETE_DATA_LEN 7 // complete length /*--------------------------------------------------------------------------------------------------------------------------------------------------- * SIEMENS & RUWIDO: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse #define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause #define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms #define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit #define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB #define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags #define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits #define RUWIDO_ADDRESS_LEN 9 // read 9 address bits #define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits #define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit #define RUWIDO_COMPLETE_DATA_LEN 17 // complete length #define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits #define SIEMENS_ADDRESS_LEN 11 // read 11 bits #define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits #define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit #define SIEMENS_COMPLETE_DATA_LEN 22 // complete length /*--------------------------------------------------------------------------------------------------------------------------------------------------- * FDC: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms #define FDC_ADDRESS_OFFSET 0 // skip 0 bits #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command #define FDC_COMMAND_OFFSET 20 // skip 20 bits #define FDC_COMMAND_LEN 12 // read 12 bits #define FDC_COMPLETE_DATA_LEN 40 // complete length #define FDC_STOP_BIT 1 // has stop bit #define FDC_LSB 1 // LSB...MSB #define FDC_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * RCCAR: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits #define RCCAR_ADDRESS_LEN 0 // read 0 address bits #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits #define RCCAR_COMMAND_LEN 13 // read 13 bits #define RCCAR_COMPLETE_DATA_LEN 13 // complete length #define RCCAR_STOP_BIT 1 // has stop bit #define RCCAR_LSB 1 // LSB...MSB #define RCCAR_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * JVC: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse #define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause #define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse #define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause #define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause #define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms #define JVC_ADDRESS_OFFSET 0 // skip 0 bits #define JVC_ADDRESS_LEN 4 // read 4 address bits #define JVC_COMMAND_OFFSET 4 // skip 4 bits #define JVC_COMMAND_LEN 12 // read 12 bits #define JVC_COMPLETE_DATA_LEN 16 // complete length #define JVC_STOP_BIT 1 // has stop bit #define JVC_LSB 1 // LSB...MSB #define JVC_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * NIKON: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse #define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause #define NIKON_PULSE_TIME 500.0e-6 // 500 usec pulse #define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause #define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause #define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms #define NIKON_ADDRESS_OFFSET 0 // skip 0 bits #define NIKON_ADDRESS_LEN 0 // read 0 address bits #define NIKON_COMMAND_OFFSET 0 // skip 0 bits #define NIKON_COMMAND_LEN 2 // read 2 bits #define NIKON_COMPLETE_DATA_LEN 2 // complete length #define NIKON_STOP_BIT 1 // has stop bit #define NIKON_LSB 0 // LSB...MSB #define NIKON_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * KATHREIN: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse #define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause #define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse #define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause #define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse #define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause #define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit) #define KATHREIN_FRAMES 1 // Kathrein sends 1 frame #define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms #define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms #define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits #define KATHREIN_ADDRESS_LEN 4 // read 4 address bits #define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits #define KATHREIN_COMMAND_LEN 7 // read 7 bits #define KATHREIN_COMPLETE_DATA_LEN 13 // complete length #define KATHREIN_STOP_BIT 1 // has stop bit #define KATHREIN_LSB 0 // MSB #define KATHREIN_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * NETBOX: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse #define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause #define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse #define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause #define NETBOX_FRAMES 1 // Netbox sends 1 frame #define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms #define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms #define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits #define NETBOX_ADDRESS_LEN 3 // read 3 address bits #define NETBOX_COMMAND_OFFSET 3 // skip 3 bits #define NETBOX_COMMAND_LEN 13 // read 13 bits #define NETBOX_COMPLETE_DATA_LEN 16 // complete length #define NETBOX_STOP_BIT 0 // has no stop bit #define NETBOX_LSB 1 // LSB #define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * LEGO: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define LEGO_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz) #define LEGO_START_BIT_PAUSE_TIME 1026.0e-6 // 1026 usec pause (39 x 1/38kHz) #define LEGO_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz) #define LEGO_1_PAUSE_TIME 553.0e-6 // 553 usec pause (21 x 1/38kHz) #define LEGO_0_PAUSE_TIME 263.0e-6 // 263 usec pause (10 x 1/38kHz) #define LEGO_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms #define LEGO_ADDRESS_OFFSET 0 // skip 0 bits #define LEGO_ADDRESS_LEN 0 // read 0 address bits #define LEGO_COMMAND_OFFSET 0 // skip 0 bits #define LEGO_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC) #define LEGO_COMPLETE_DATA_LEN 16 // complete length #define LEGO_STOP_BIT 1 // has stop bit #define LEGO_LSB 0 // MSB...LSB #define LEGO_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * THOMSON: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define THOMSON_PULSE_TIME 550.0e-6 // 550 usec pulse #define THOMSON_1_PAUSE_TIME 4500.0e-6 // 4500 usec pause #define THOMSON_0_PAUSE_TIME 2000.0e-6 // 2000 usec pause #define THOMSON_FRAMES 1 // THOMSON sends 1 frame #define THOMSON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // repetition after 35ms #define THOMSON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms #define THOMSON_ADDRESS_OFFSET 0 // skip 0 bits #define THOMSON_ADDRESS_LEN 4 // read 4 address bits #define THOMSON_COMMAND_OFFSET 5 // skip 4 address bits + 1 toggle bit #define THOMSON_COMMAND_LEN 7 // read 7 command bits #define THOMSON_COMPLETE_DATA_LEN 12 // complete length #define THOMSON_STOP_BIT 1 // has stop bit #define THOMSON_LSB 0 // MSB...LSB #define THOMSON_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * BOSE: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define BOSE_START_BIT_PULSE_TIME 1060.0e-6 // 1060 usec pulse #define BOSE_START_BIT_PAUSE_TIME 1425.0e-6 // 1425 usec pause #define BOSE_PULSE_TIME 550.0e-6 // 550 usec pulse #define BOSE_1_PAUSE_TIME 1425.0e-6 // 1425 usec pause #define BOSE_0_PAUSE_TIME 437.0e-6 // 437 usec pause #define BOSE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms??? #define BOSE_ADDRESS_OFFSET 0 // skip 0 bits #define BOSE_ADDRESS_LEN 0 // read 16 address bits #define BOSE_COMMAND_OFFSET 0 // skip 16 bits (8 address + 8 /address) #define BOSE_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command) #define BOSE_COMPLETE_DATA_LEN 16 // complete length #define BOSE_STOP_BIT 1 // has stop bit #define BOSE_LSB 1 // LSB...MSB #define BOSE_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * A1TVBOX: * In reality A1 TV Box has no start bit with 300/340 usec. There are 2 start bits "10" with 250us pulse + 150us pause + 150us pause + 250us pulse * This is not very easy to detect, because 1st and 2nd pause of both start bits are closely spaced. * So IRMP looks for pseudo start bit with 300/340 usec and ignores the second half of the 2nd bit (250us pulse) * This method only works because the first data bit (which is the 3rd bit) following is always "1": * IRMP treats the first "long" pulse (250us of 2nd start bit + 250us of 1st data bit) of this "1" as a first _short_ pulse. * This is a bug in IRMP's manchester decoder, but a good feature here ;-) *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define A1TVBOX_START_BIT_PULSE_TIME 300.0e-6 // 300 usec pulse #define A1TVBOX_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause #define A1TVBOX_BIT_PULSE_TIME 250.0e-6 // 250 usec pulse #define A1TVBOX_BIT_PAUSE_TIME 150.0e-6 // 150 usec pulse #define A1TVBOX_STOP_BIT 0 // has no stop bit #define A1TVBOX_LSB 0 // MSB...LSB #define A1TVBOX_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags #define A1TVBOX_FRAMES 1 // A1TVBOX sends each frame 1 times #define A1TVBOX_ADDRESS_OFFSET 1 // skip 1 bits #define A1TVBOX_ADDRESS_LEN 8 // read 8 address bits #define A1TVBOX_COMMAND_OFFSET 9 // skip 9 bits (start bit + address) #define A1TVBOX_COMMAND_LEN 8 // read 8 command bits #define A1TVBOX_COMPLETE_DATA_LEN 17 // complete length incl. start bit #define A1TVBOX_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct /*--------------------------------------------------------------------------------------------------------------------------------------------------- * ORTEK (Hama): 6 address bits + 2 frame type bits + 6 command bits + 1 parity bit + 1 unknown bit + "1" + "0" *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define ORTEK_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse #define ORTEK_START_BIT_PAUSE_TIME 1000.0e-6 // 1000 usec pause #define ORTEK_BIT_TIME 500.0e-6 // 500 usec pulse/pause #define ORTEK_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms #define ORTEK_ADDRESS_OFFSET 0 // skip 0 bits #define ORTEK_ADDRESS_LEN 8 // read 6 address bits + 2 special bits #define ORTEK_COMMAND_OFFSET 8 // skip 6 address bits + 2 special bits #define ORTEK_COMMAND_LEN 6 // read 6 command bits #define ORTEK_COMPLETE_DATA_LEN 18 // complete length #define ORTEK_STOP_BIT 0 // has no stop bit #define ORTEK_LSB 0 // MSB...LSB #define ORTEK_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * TELEFUNKEN: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define TELEFUNKEN_START_BIT_PULSE_TIME 600.0e-6 // 600 usec pulse #define TELEFUNKEN_START_BIT_PAUSE_TIME 1500.0e-6 // 1500 usec pause #define TELEFUNKEN_PULSE_TIME 600.0e-6 // 600 usec pulse #define TELEFUNKEN_1_PAUSE_TIME 1500.0e-6 // 1500 usec pause #define TELEFUNKEN_0_PAUSE_TIME 600.0e-6 // 600 usec pause #define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after XX ms ????? #define TELEFUNKEN_ADDRESS_OFFSET 0 // skip 0 bits #define TELEFUNKEN_ADDRESS_LEN 0 // read 0 address bits #define TELEFUNKEN_COMMAND_OFFSET 0 // skip 0 bits #define TELEFUNKEN_COMMAND_LEN 15 // read 15 bits #define TELEFUNKEN_COMPLETE_DATA_LEN 15 // complete length #define TELEFUNKEN_STOP_BIT 1 // has stop bit #define TELEFUNKEN_LSB 0 // LSB...MSB #define TELEFUNKEN_FLAGS 0 // flags /*--------------------------------------------------------------------------------------------------------------------------------------------------- * ROOMBA *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define ROOMBA_START_BIT_PULSE_TIME 2790.0e-6 // 2790 usec pulse #define ROOMBA_START_BIT_PAUSE_TIME 930.0e-6 // 930 usec pause #define ROOMBA_0_PULSE_TIME 930.0e-6 // 930 usec pulse #define ROOMBA_1_PULSE_TIME 2790.0e-6 // 2790 usec pulse #define ROOMBA_0_PAUSE_TIME 2790.0e-6 // 2790 usec pause #define ROOMBA_1_PAUSE_TIME 930.0e-6 // 930 usec pause #define ROOMBA_FRAME_REPEAT_PAUSE_TIME 18.0e-3 // frame repeat after 18ms #define ROOMBA_ADDRESS_OFFSET 0 // skip 0 bits #define ROOMBA_ADDRESS_LEN 0 // read 0 address bits #define ROOMBA_COMMAND_OFFSET 0 // skip 0 bits #define ROOMBA_COMMAND_LEN 7 // read 7 bits #define ROOMBA_COMPLETE_DATA_LEN 7 // complete length #define ROOMBA_STOP_BIT 0 // has stop bit #define ROOMBA_LSB 0 // MSB...LSB #define ROOMBA_FLAGS 0 // flags #define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms #endif // _IRMP_PROTOCOLS_H_