/*--------------------------------------------------------------------------------------------------------------------------------------------------- * irsndconfig.h * * Copyright (c) 2010-2011 Frank Meyer - frank(at)fli4l.de * * $Id: irsndconfig.h,v 1.29 2012/02/16 12:39:36 fm Exp $ * * ATMEGA88 @ 8 MHz * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ /*--------------------------------------------------------------------------------------------------------------------------------------------------- * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS #define F_INTERRUPTS 15000 // interrupts per second #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change settings from 1 to 0 if you want to disable one or more encoders. * This saves program space. * 1 enable decoder * 0 disable decoder *--------------------------------------------------------------------------------------------------------------------------------------------------- */ // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space #define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes #define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~100 bytes #define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes #define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~150 bytes #define IRSND_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~200 bytes // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space #define IRSND_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~150 bytes #define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~250 bytes #define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 ~250 bytes #define IRSND_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes #define IRSND_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~150 bytes #define IRSND_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes #define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes #define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 ~150 bytes #define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~400 bytes // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space #define IRSND_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~100 bytes #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 ~250 bytes #define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~100 bytes #define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~100 bytes #define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes #define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes #define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes #define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes #define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes /*--------------------------------------------------------------------------------------------------------------------------------------------------- * DO NOT CHANGE: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define IRSND_OC2 0 // OC2 #define IRSND_OC2A 1 // OC2A #define IRSND_OC2B 2 // OC2B #define IRSND_OC0 3 // OC0 #define IRSND_OC0A 4 // OC0A #define IRSND_OC0B 5 // OC0B //PIC Microchip C18 #define IRSND_PIC_CCP1 1 // PIC C18 RC2 = PWM1 module #define IRSND_PIC_CCP2 2 // PIC C18 RC1 = PWM2 module #ifndef PIC_C18 // AVR part /*--------------------------------------------------------------------------------------------------------------------------------------------------- * AVR * * Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8 * IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88 * IRSND_OC2B = OC2B on ATmegas supporting OC2B, e.g. ATmega88 * IRSND_OC0 = OC0 on ATmegas supporting OC0, e.g. ATmega162 * IRSND_OC0A = OC0A on ATmegas/ATtinys supporting OC0A, e.g. ATtiny84, ATtiny85 * IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85 * IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ... * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ... *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define IRSND_OCx IRSND_OC2B // use OC2B /*--------------------------------------------------------------------------------------------------------------------------------------------------- * PIC C18 * * Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ... * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ... *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #else #define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC /*--------------------------------------------------------------------------------------------------------------------------------------------------- * PIC C18 - change other PIC specific settings - ignore it when using AVR *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define F_CPU 48000000UL // PIC freq.; Set you Freq here #define Pre_Scaler 4 // define prescaler for Timer2 e.g. 1,4,16 !!! #define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value #warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself ! //Do not change lines below until you have a diffrent HW !! Example for 18F2550/18F4550 //Setup macro for PWM used PWM module #if IRSND_OCx == IRSND_PIC_CCP2 #define IRSND_PIN TRISCbits.TRISC1 // RC1 = PWM2 #define SetDCPWM(x) SetDCPWM2(x) #define ClosePWM ClosePWM2 #define OpenPWM(x) OpenPWM2(x) #endif #if IRSND_OCx == IRSND_PIC_CCP1 #define IRSND_PIN TRISCbits.TRISC2 // RC2 = PWM1 #define SetDCPWM(x) SetDCPWM1(x) #define ClosePWM ClosePWM1 #define OpenPWM(x) OpenPWM1(x) #endif //Setup macro for OpenTimer with defined Pre_Scaler #if Pre_Scaler == 1 #define OpenTimer OpenTimer2(TIMER_INT_OFF & T2_PS_1_1); #elif Pre_Scaler == 4 #define OpenTimer OpenTimer2(TIMER_INT_OFF & T2_PS_1_4); #elif Pre_Scaler == 16 #define OpenTimer OpenTimer2(TIMER_INT_OFF & T2_PS_1_16); #else #error Incorrect value for Pre_Scaler #endif #endif //PIC_C18 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Use Callbacks to indicate output signal or something else *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * D O N O T C H A N G E T H E F O L L O W I N G L I N E S ! *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #if IRSND_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000 #warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000) #undef IRSND_SUPPORT_SIEMENS_PROTOCOL #define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! #endif #if IRSND_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000 #warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000) #undef IRSND_SUPPORT_RECS80_PROTOCOL #define IRSND_SUPPORT_RECS80_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! #endif #if IRSND_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000 #warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000) #undef IRSND_SUPPORT_RECS80EXT_PROTOCOL #define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! #endif #if IRSND_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000 #warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000) #undef IRSND_SUPPORT_LEGO_PROTOCOL #define IRSND_SUPPORT_LEGO_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! #endif