/*--------------------------------------------------------------------------------------------------------------------------------------------------- * irsndconfig.h * * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H! * * Copyright (c) 2010-2013 Frank Meyer - frank(at)fli4l.de * * $Id: irsndconfig.h,v 1.58 2014/06/23 06:56:00 fm Exp $ * * ATMEGA88 @ 8 MHz * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef _IRSNDCONFIG_H_ #define _IRSNDCONFIG_H_ #if !defined(_IRSND_H_) # error please include only irsnd.h, not irsndconfig.h #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS # define F_INTERRUPTS 15000 // interrupts per second #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change settings from 1 to 0 if you want to disable one or more encoders. * This saves program space. * 1 enable decoder * 0 disable decoder *--------------------------------------------------------------------------------------------------------------------------------------------------- */ // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space #define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~200 bytes #define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~100 bytes #define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes #define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space #define IRSND_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~200 bytes #define IRSND_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~150 bytes #define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~250 bytes #define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 ~250 bytes #define IRSND_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes #define IRSND_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~150 bytes #define IRSND_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes #define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~250 bytes #define IRSND_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes #define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 ~150 bytes #define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~400 bytes // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space #define IRSND_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~100 bytes #define IRSND_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER >= 10000 ~100 bytes #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 ~250 bytes #define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 15000 ~100 bytes #define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 15000 ~100 bytes #define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes #define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes #define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes #define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes #define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes #define IRSND_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes #define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~250 bytes #define IRSND_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~200 bytes #define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes #define IRSND_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~150 bytes. /*--------------------------------------------------------------------------------------------------------------------------------------------------- * AVR section: * * Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8 * IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88 * IRSND_OC2B = OC2B on ATmegas supporting OC2B, e.g. ATmega88 * IRSND_OC0 = OC0 on ATmegas supporting OC0, e.g. ATmega162 * IRSND_OC0A = OC0A on ATmegas/ATtinys supporting OC0A, e.g. ATtiny84, ATtiny85, ATtiny87/167 * IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #if defined(ATMEL_AVR) # define IRSND_OCx IRSND_OC2B // use OC2B /*--------------------------------------------------------------------------------------------------------------------------------------------------- * PIC C18 section: * * Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ... * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ... *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined(PIC_C18) # define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC // change other PIC C18 specific settings: # define F_CPU 48000000UL // PIC frequency: set your freq here # define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16 # define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value # warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself ! /*--------------------------------------------------------------------------------------------------------------------------------------------------- * ARM STM32 section: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (ARM_STM32) // use A6 as IR output on STM32 # define IRSND_PORT_LETTER A # define IRSND_BIT_NUMBER 6 # define IRSND_TIMER_NUMBER 10 # define IRSND_TIMER_CHANNEL_NUMBER 1 // only channel 1 can be used at the moment, others won't work /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Other target system *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif !defined (UNIX_OR_WINDOWS) # error target system not defined. #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Use Callbacks to indicate output signal or something else *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef IRSND_USE_CALLBACK # define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0 #endif #endif // _IRSNDCONFIG_H_