1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* main.c - demo main module to test irmp decoder
*
* Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de
*
* $Id: main.c,v 1.17 2013/01/17 07:33:14 fm Exp $
*
* This demo module is runnable on AVRs and LM4F120 Launchpad (ARM Cortex M4)
*
* ATMEGA88 @ 8 MHz internal RC Osc with BODLEVEL 4.3V: lfuse: 0xE2 hfuse: 0xDC efuse: 0xF9
* ATMEGA88 @ 8 MHz external Crystal Osc with BODLEVEL 4.3V: lfuse: 0xFF hfuse: 0xDC efuse: 0xF9
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#include "irmp.h"
#ifndef F_CPU
#error F_CPU unkown
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* ATMEL AVR part:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#if defined (ATMEL_AVR)
void
timer1_init (void)
{
#if defined (__AVR_ATtiny45__) || defined (__AVR_ATtiny85__) // ATtiny45 / ATtiny85:
#if F_CPU >= 16000000L
OCR1C = (F_CPU / F_INTERRUPTS / 8) - 1; // compare value: 1/15000 of CPU frequency, presc = 8
TCCR1 = (1 << CTC1) | (1 << CS12); // switch CTC Mode on, set prescaler to 8
#else
OCR1C = (F_CPU / F_INTERRUPTS / 4) - 1; // compare value: 1/15000 of CPU frequency, presc = 4
TCCR1 = (1 << CTC1) | (1 << CS11) | (1 << CS10); // switch CTC Mode on, set prescaler to 4
#endif
#else // ATmegaXX:
OCR1A = (F_CPU / F_INTERRUPTS) - 1; // compare value: 1/15000 of CPU frequency
TCCR1B = (1 << WGM12) | (1 << CS10); // switch CTC Mode on, set prescaler to 1
#endif
#ifdef TIMSK1
TIMSK1 = 1 << OCIE1A; // OCIE1A: Interrupt by timer compare
#else
TIMSK = 1 << OCIE1A; // OCIE1A: Interrupt by timer compare
#endif
}
#ifdef TIM1_COMPA_vect // ATtiny84
#define COMPA_VECT TIM1_COMPA_vect
#else
#define COMPA_VECT TIMER1_COMPA_vect // ATmega
#endif
ISR(COMPA_VECT) // Timer1 output compare A interrupt service routine, called every 1/15000 sec
{
(void) irmp_ISR(); // call irmp ISR
// call other timer interrupt routines...
}
int
main (void)
{
IRMP_DATA irmp_data;
irmp_init(); // initialize irmp
timer1_init(); // initialize timer1
sei (); // enable interrupts
for (;;)
{
if (irmp_get_data (&irmp_data))
{
// ir signal decoded, do something here...
// irmp_data.protocol is the protocol, see irmp.h
// irmp_data.address is the address/manufacturer code of ir sender
// irmp_data.command is the command code
// irmp_protocol_names[irmp_data.protocol] is the protocol name (if enabled, see irmpconfig.h)
}
}
}
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* LM4F120 Launchpad (ARM Cortex M4):
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined(STELLARIS_ARM_CORTEX_M4)
void
timer1_init (void)
{
SysCtlPeripheralEnable(SYSCTL_PERIPH_TIMER1);
TimerConfigure(TIMER1_BASE, TIMER_CFG_32_BIT_PER);
TimerLoadSet(TIMER1_BASE, TIMER_A, (F_CPU / F_INTERRUPTS) -1);
IntEnable(INT_TIMER1A);
TimerIntEnable(TIMER1_BASE, TIMER_TIMA_TIMEOUT);
TimerEnable(TIMER1_BASE, TIMER_A);
// Important: Timer1IntHandler has to be configured in startup_ccs.c !
}
void
Timer1IntHandler(void) // Timer1 Interrupt Handler
{
(void) irmp_ISR(); // call irmp ISR
// call other timer interrupt routines...
}
int
main (void)
{
IRMP_DATA irmp_data;
ROM_FPUEnable();
ROM_FPUStackingEnable();
ROM_SysCtlClockSet(SYSCTL_SYSDIV_5|SYSCTL_USE_PLL|SYSCTL_XTAL_16MHZ|SYSCTL_OSC_MAIN);
irmp_init(); // initialize irmp
timer1_init(); // initialize timer1
sei (); // enable interrupts
for (;;)
{
if (irmp_get_data (&irmp_data))
{
// ir signal decoded, do something here...
// irmp_data.protocol is the protocol, see irmp.h
// irmp_data.address is the address/manufacturer code of ir sender
// irmp_data.command is the command code
// irmp_protocol_names[irmp_data.protocol] is the protocol name (if enabled, see irmpconfig.h)
}
}
}
#endif
|