#include "common.h"

#include "command.h"
#include "cmd_mem.h"


extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);


cmd_tbl_t cmd_tbl[] = {

#ifdef DEBUG
CMD_TBL_ITEM(
	!mdr,	3,	1,	do_dump_mem,
	"RAM dump",
	"address [count]"
),
CMD_TBL_ITEM(
	!mde,	3,	1,	do_dump_mem,
	"EEPROM dump",
	"address [count]"
),
CMD_TBL_ITEM(
	!cpe,	4,	0,	do_eep_cp,
	"EEPROM copy",
	"source target count"
),
#endif
CMD_TBL_ITEM(
	mstep,	2,	1,	do_busreq_pulse,
	"execute one M cycle",
	"[count]\n"
	"     - repeat count times"
),
CMD_TBL_ITEM(
	echo,	CONFIG_SYS_MAXARGS,	1,	do_echo,
	"echo args to console",
	"[args..]\n"
	"     - echo args to console; \\c suppresses newline"
),
CMD_TBL_ITEM_COMPLETE(
	run,	CONFIG_SYS_MAXARGS,	1,	do_run,
	"run commands in an environment variable",
	"var [...]\n"
	"    - run the commands in the environment variable(s) 'var'",
	var_complete
),
CMD_TBL_ITEM_COMPLETE(
	printenv, CONFIG_SYS_MAXARGS,	1,	do_env_print,
	"print environment variables",
	"\n"
	"    - print values of all environment variables\n"
	"printenv name ...\n"
	"    - print value of environment variable 'name'",
	var_complete
),
CMD_TBL_ITEM_COMPLETE(
	setenv, CONFIG_SYS_MAXARGS,	0,	do_env_set,
	"set environment variables",
	"name value ...\n"
	"    - set environment variable 'name' to 'value ...'\n"
	"setenv name\n"
	"    - delete environment variable 'name'",
	var_complete
),
CMD_TBL_ITEM(
	saveenv,	1,	0,	do_env_save,
	"save environment variables to persistent storage",
	""
),

CMD_TBL_ITEM(
	loadf,	1,	0,	do_loadf,
	"load srec_cat prepared image from controller flash",
	""
),
CMD_TBL_ITEM(
	go,	2,	0,	do_go,
	"start application at address 'addr'",
	"addr\n"
	"    - start application at address 'addr'"
//	"\n"
//	"      passing 'arg' as arguments"
),
CMD_TBL_ITEM(
	reset,	1,	0,	do_reset,
	"Keep CPU in RESET state",
	""
),
CMD_TBL_ITEM(
	restart, 1, 0,	do_restart,
	"Perform RESET of the CPU",
	""
),

CMD_TBL_ITEM(
	md,	3,	1,	do_mem_md,
	"memory display",
	"address [# of objects]"
),
CMD_TBL_ITEM(
	mm,	2,	1,	do_mem_mm,
	"memory modify (auto-incrementing address)",
	"address"
),
CMD_TBL_ITEM(
	nm,	2,	1,	do_mem_nm,
	"memory modify (constant address)",
	"address"
),
CMD_TBL_ITEM(
	mw,	4,	1,	do_mem_mw,
	"memory write (fill)",
	"address value [count]"
),
CMD_TBL_ITEM(
	cp,	4,	1,	do_mem_cp,
	"memory copy",
	"source target count"
),
CMD_TBL_ITEM(
	cmp,	4,	1,	do_mem_cmp,
	"memory compare",
	"addr1 addr2 count"
),
CMD_TBL_ITEM(
	base,	2,	1,	do_mem_base,
	"print or set address offset",
	"\n"
	"    - print address offset for memory commands\n"
	"base offset\n"
	"    - set address offset for memory commands to 'offset'"
),
CMD_TBL_ITEM(
	loop,	3,	1,	do_mem_loop,
	"infinite loop on address range",
	"address number_of_bytes"
),
#ifdef CONFIG_LOOPW
CMD_TBL_ITEM(
	loopw,	4,	1,	do_mem_loopw,
	"infinite write loop on address range",
	"address number_of_bytes data_to_write"
),
#endif /* CONFIG_LOOPW */

#ifdef CONFIG_CMD_MEMTEST
CMD_TBL_ITEM(
	mtest,	5,	1,	do_mem_mtest,
	"simple RAM read/write test",
	"[start [end [pattern [iterations]]]]"
),
#endif	/* CONFIG_CMD_MEMTEST */

#ifdef CONFIG_MX_CYCLIC
CMD_TBL_ITEM(
	mdc,	4,	1,	do_mem_mdc,
	"memory display cyclic",
	"address count delay(ms)"
),
CMD_TBL_ITEM(
	mwc,	4,	1,	do_mem_mwc,
	"memory write cyclic",
	"address value delay(ms)"
),
#endif /* CONFIG_MX_CYCLIC */


CMD_TBL_ITEM(
	help,	CONFIG_SYS_MAXARGS,	1,	do_help,
	"print command description/usage",
	"\n"
	"       - print brief description of all commands\n"
	"help command ...\n"
	"       - print detailed usage of 'command'"
),

/* This does not use the CMD_TBL_ITEM macro as ? can't be used in symbol names */
	{FSTR("?"),   CONFIG_SYS_MAXARGS, 1, do_help,
	 FSTR("alias for 'help'"),
#ifdef  CONFIG_SYS_LONGHELP
	FSTR(""),
#endif /* CONFIG_SYS_LONGHELP */
#ifdef CONFIG_AUTO_COMPLETE
	0,
#endif
},
/* Mark end of table */
{ 0 },
};