]>
Commit | Line | Data |
---|---|---|
cb8474cc | 1 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
2 | * irmpconfig.h\r | |
3 | *\r | |
08f2dd9d | 4 | * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r |
cb8474cc | 5 | *\r |
0834784c | 6 | * Copyright (c) 2009-2015 Frank Meyer - frank(at)fli4l.de\r |
7fe8188d | 7 | * Extensions for PIC 12F1820 W.Strobl 2014-07-20\r |
08f2dd9d | 8 | *\r |
003c1008 | 9 | * $Id: irmpconfig.h,v 1.127 2015/04/23 12:47:29 fm Exp $\r |
cb8474cc | 10 | *\r |
11 | * This program is free software; you can redistribute it and/or modify\r | |
12 | * it under the terms of the GNU General Public License as published by\r | |
13 | * the Free Software Foundation; either version 2 of the License, or\r | |
14 | * (at your option) any later version.\r | |
15 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
16 | */\r | |
17 | \r | |
18 | #ifndef _IRMPCONFIG_H_\r | |
19 | #define _IRMPCONFIG_H_\r | |
20 | \r | |
08f2dd9d | 21 | #ifndef _IRMP_H_\r |
22 | # error please include only irmp.h, not irmpconfig.h\r | |
23 | #endif\r | |
24 | \r | |
cb8474cc | 25 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
d823e852 | 26 | * Change F_INTERRUPTS if you change the number of interrupts per second,\r |
35213800 | 27 | * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r |
28 | * A value above 15000 costs additional program space, absolute maximum value is 20000.\r | |
7a844aff | 29 | * On PIC with XC8/C18 Compiler, use 15151 as the correct value.\r |
cb8474cc | 30 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
31 | */\r | |
b5ea7869 | 32 | #ifndef F_INTERRUPTS\r |
08f2dd9d | 33 | # define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r |
b5ea7869 | 34 | #endif\r |
cb8474cc | 35 | \r |
36 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
37 | * Change settings from 1 to 0 if you want to disable one or more decoders.\r | |
38 | * This saves program space.\r | |
d823e852 | 39 | *\r |
cb8474cc | 40 | * 1 enable decoder\r |
41 | * 0 disable decoder\r | |
d823e852 | 42 | *\r |
2eab5ec9 | 43 | * The standard decoders are enabled per default.\r |
66c864ba | 44 | * Less common protocols are disabled here, you need to enable them manually.\r |
2eab5ec9 | 45 | *\r |
d823e852 | 46 | * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r |
47 | * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r | |
08f2dd9d | 48 | * You cannot enable both DENON and RUWIDO, only enable one of them.\r |
cb8474cc | 49 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
50 | */\r | |
d823e852 | 51 | \r |
66c864ba | 52 | // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r |
2cfc146d | 53 | #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r |
54 | #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r | |
956ea3ea | 55 | #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes\r |
770a1a9d | 56 | #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r |
35213800 | 57 | \r |
66c864ba | 58 | // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r |
03148c47 | 59 | #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r |
60 | #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r | |
61 | #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r | |
956ea3ea | 62 | #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes\r |
63 | #define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes\r | |
64 | #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r | |
65 | #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r | |
03148c47 | 66 | #define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes\r |
67 | #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r | |
68 | #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r | |
69 | #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r | |
f50e01e7 | 70 | \r |
71 | // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r | |
03148c47 | 72 | #define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes\r |
73 | #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r | |
74 | #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r | |
75 | #define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes\r | |
76 | #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r | |
77 | #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r | |
78 | #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r | |
79 | #define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r | |
80 | #define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r | |
81 | #define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r | |
82 | #define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes\r | |
b85cb27d | 83 | #define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r |
03148c47 | 84 | #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r |
85 | #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r | |
86 | #define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r | |
87 | #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r | |
88 | #define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes\r | |
89 | #define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r | |
90 | #define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes\r | |
69da6090 | 91 | #define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes\r |
956ea3ea | 92 | #define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)\r |
061e654c | 93 | #define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes\r |
003c1008 | 94 | #define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes\r |
956ea3ea | 95 | #define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)\r |
2fb27bfe | 96 | \r |
cb8474cc | 97 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
ad4d3d41 | 98 | * Change hardware pin here for ATMEL ATMega/ATTiny/XMega\r |
cb8474cc | 99 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
100 | */\r | |
ad4d3d41 | 101 | #if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR\r |
08f2dd9d | 102 | # define IRMP_PORT_LETTER B\r |
103 | # define IRMP_BIT_NUMBER 6\r | |
cb8474cc | 104 | \r |
105 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
4a7dc859 | 106 | * Change hardware pin here for PIC C18 or XC8 compiler\r |
cb8474cc | 107 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
108 | */\r | |
4a7dc859 | 109 | #elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)\r |
ad4d3d41 | 110 | # if defined(__12F1840)\r |
111 | # define IRMP_PIN RA5 // on 12F1840 with XC8 compiler\r | |
112 | # else\r | |
113 | # define IRMP_PIN PORTBbits.RB4 // PIC C18\r | |
114 | # endif\r | |
cb8474cc | 115 | \r |
6c3c57e6 | 116 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 117 | * Change hardware pin here for PIC CCS compiler\r |
6c3c57e6 | 118 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
119 | */\r | |
08f2dd9d | 120 | #elif defined (PIC_CCS)\r |
4a7dc859 | 121 | # define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler)\r |
6c3c57e6 | 122 | \r |
1f54e86c | 123 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 124 | * Change hardware pin here for ARM STM32\r |
1f54e86c | 125 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
126 | */\r | |
08f2dd9d | 127 | #elif defined (ARM_STM32) // use C13 as IR input on STM32\r |
128 | # define IRMP_PORT_LETTER C\r | |
129 | # define IRMP_BIT_NUMBER 13\r | |
1f54e86c | 130 | \r |
afd1e690 | 131 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
132 | * Change hardware pin here for Stellaris ARM Cortex M4\r | |
133 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
134 | */\r | |
135 | #elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F\r | |
136 | # define IRMP_PORT_LETTER B\r | |
137 | # define IRMP_BIT_NUMBER 4\r | |
138 | \r | |
7644ac04 | 139 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 140 | * Handling of unknown target system: DON'T CHANGE\r |
7644ac04 | 141 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
142 | */\r | |
08f2dd9d | 143 | #elif !defined (UNIX_OR_WINDOWS)\r |
144 | # error target system not defined.\r | |
145 | #endif\r | |
7644ac04 | 146 | \r |
1aee56bc | 147 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 148 | * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r |
1aee56bc | 149 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
150 | */\r | |
08f2dd9d | 151 | #ifndef IRMP_LOGGING\r |
152 | # define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0\r | |
770a1a9d | 153 | #endif\r |
154 | \r | |
08f2dd9d | 155 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
156 | * Use external logging routines\r | |
157 | * If you enable external logging, you have also to enable IRMP_LOGGING above\r | |
158 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
159 | */\r | |
160 | #ifndef IRMP_EXT_LOGGING\r | |
161 | # define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0\r | |
35213800 | 162 | #endif\r |
163 | \r | |
08f2dd9d | 164 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
165 | * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r | |
166 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
167 | */\r | |
168 | #ifndef IRMP_PROTOCOL_NAMES\r | |
169 | # define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0\r | |
35213800 | 170 | #endif\r |
171 | \r | |
08f2dd9d | 172 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
173 | * Use Callbacks to indicate input signal\r | |
174 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
175 | */\r | |
176 | #ifndef IRMP_USE_CALLBACK\r | |
177 | # define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r | |
12948cf3 | 178 | #endif\r |
179 | \r | |
ad4d3d41 | 180 | #endif // _IRMPCONFIG_H_\r |