[irmp.git] / irmpconfig.h

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * irmpconfig.h\r
 *\r
 * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r
 *\r
 * Copyright (c) 2009-2012 Frank Meyer - frank(at)fli4l.de\r
 *\r
 * $Id: irmpconfig.h,v 1.90 2012/05/23 12:26:26 fm Exp $\r
 *\r
 * ATMEGA88 @ 8 MHz\r
 *\r
 * This program is free software; you can redistribute it and/or modify\r
 * it under the terms of the GNU General Public License as published by\r
 * the Free Software Foundation; either version 2 of the License, or\r
 * (at your option) any later version.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
#ifndef _IRMPCONFIG_H_\r
#define _IRMPCONFIG_H_\r
\r
#ifndef _IRMP_H_\r
#  error please include only irmp.h, not irmpconfig.h\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change F_INTERRUPTS if you change the number of interrupts per second,\r
 * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
 * A value above 15000 costs additional program space, absolute maximum value is 20000.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef F_INTERRUPTS\r
#  define F_INTERRUPTS                          15000   // interrupts per second, min: 10000, max: 20000, typ: 15000\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change settings from 1 to 0 if you want to disable one or more decoders.\r
 * This saves program space.\r
 *\r
 * 1 enable  decoder\r
 * 0 disable decoder\r
 *\r
 * The standard decoders are enabled per default.\r
 * Less common protocols are disabled here, you need to enable them manually.\r
 *\r
 * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
 * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
 * You cannot enable both DENON and RUWIDO, only enable one of them.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
// typical protocols, disable here!             Enable  Remarks                 F_INTERRUPTS            Program Space\r
#define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsung32  >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // Matsushita           >= 10000                  ~50 bytes\r
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_DENON_PROTOCOL             1       // DENON, Sharp         >= 10000                 ~250 bytes\r
\r
// more protocols, enable here!                 Enable  Remarks                 F_INTERRUPTS            Program Space\r
#define IRMP_SUPPORT_RC5_PROTOCOL               0       // RC5                  >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_RC6_PROTOCOL               0       // RC6 & RC6A           >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_JVC_PROTOCOL               0       // JVC                  >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_NEC16_PROTOCOL             0       // NEC16                >= 10000                 ~100 bytes\r
#define IRMP_SUPPORT_NEC42_PROTOCOL             0       // NEC42                >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_IR60_PROTOCOL              0       // IR60 (SDA2008)       >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // Grundig              >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // Siemens Gigaset      >= 15000                 ~550 bytes\r
#define IRMP_SUPPORT_NOKIA_PROTOCOL             0       // Nokia                >= 10000                 ~300 bytes\r
\r
// exotic protocols, enable here!               Enable  Remarks                 F_INTERRUPTS            Program Space\r
#define IRMP_SUPPORT_KATHREIN_PROTOCOL          0       // Kathrein             >= 10000                 ~200 bytes\r
#define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // NUBERT               >= 10000                  ~50 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // Bang & Olufsen       >= 10000                 ~200 bytes\r
#define IRMP_SUPPORT_RECS80_PROTOCOL            0       // RECS80 (SAA3004)     >= 15000                  ~50 bytes\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // RECS80EXT (SAA3008)  >= 15000                  ~50 bytes\r
#define IRMP_SUPPORT_THOMSON_PROTOCOL           0       // Thomson              >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_NIKON_PROTOCOL             0       // NIKON camera         >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_NETBOX_PROTOCOL            0       // Netbox keyboard      >= 10000                 ~400 bytes (PROTOTYPE!)\r
#define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)  ~150 bytes (~400 in combination with RC5)\r
#define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // RC Car               >= 10000 (better 15000)  ~150 bytes (~500 in combination with RC5)\r
#define IRMP_SUPPORT_RUWIDO_PROTOCOL            0       // RUWIDO, T-Home       >= 15000                 ~550 bytes\r
#define IRMP_SUPPORT_LEGO_PROTOCOL              0       // LEGO Power RC        >= 20000                 ~150 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for ATMEL AVR\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#if defined (ATMEL_AVR)                                                 // use PB6 as IR input on AVR\r
#  define IRMP_PORT_LETTER                      B\r
#  define IRMP_BIT_NUMBER                       6\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for PIC C18 compiler\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif defined (PIC_C18)                                                 // use RB4 as IR input on PIC\r
#  define IRMP_PIN                              PORTBbits.RB4\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for PIC CCS compiler\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif defined (PIC_CCS)\r
#  define IRMP_PIN                              PIN_B4                  // use PB4 as IR input on PIC\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for ARM STM32\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif defined (ARM_STM32)                                               // use C13 as IR input on STM32\r
#  define IRMP_PORT_LETTER                      C\r
#  define IRMP_BIT_NUMBER                       13\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Handling of unknown target system: DON'T CHANGE\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif !defined (UNIX_OR_WINDOWS)\r
#  error target system not defined.\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_LOGGING\r
#  define IRMP_LOGGING                          0       // 1: log IR signal (scan), 0: do not. default is 0\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Use external logging routines\r
 * If you enable external logging, you have also to enable IRMP_LOGGING above\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_EXT_LOGGING\r
#  define IRMP_EXT_LOGGING                      0       // 1: use external logging, 0: do not. default is 0\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_PROTOCOL_NAMES\r
#  define IRMP_PROTOCOL_NAMES                   0       // 1: access protocol names, 0: do not. default is 0\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Use Callbacks to indicate input signal\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_USE_CALLBACK\r
#  define IRMP_USE_CALLBACK                     0       // 1: use callbacks. 0: do not. default is 0\r
#endif\r
\r
#endif /* _WC_IRMPCONFIG_H_ */\r
Commit	Line	Data
cb8474cc	1	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	2	* irmpconfig.h\r
	3	*\r
08f2dd9d	4	* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r
cb8474cc	5	*\r
08f2dd9d	6	* Copyright (c) 2009-2012 Frank Meyer - frank(at)fli4l.de\r
	7	*\r
	8	* $Id: irmpconfig.h,v 1.90 2012/05/23 12:26:26 fm Exp $\r
cb8474cc	9	*\r
	10	* ATMEGA88 @ 8 MHz\r
	11	*\r
	12	* This program is free software; you can redistribute it and/or modify\r
	13	* it under the terms of the GNU General Public License as published by\r
	14	* the Free Software Foundation; either version 2 of the License, or\r
	15	* (at your option) any later version.\r
	16	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	17	*/\r
	18	\r
	19	#ifndef _IRMPCONFIG_H_\r
	20	#define _IRMPCONFIG_H_\r
	21	\r
08f2dd9d	22	#ifndef _IRMP_H_\r
	23	# error please include only irmp.h, not irmpconfig.h\r
	24	#endif\r
	25	\r
cb8474cc	26	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
d823e852	27	* Change F_INTERRUPTS if you change the number of interrupts per second,\r
35213800	28	* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
35213800	29	* A value above 15000 costs additional program space, absolute maximum value is 20000.\r
cb8474cc	30	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	31	*/\r
b5ea7869	32	#ifndef F_INTERRUPTS\r
08f2dd9d	33	# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r
b5ea7869	34	#endif\r
cb8474cc	35	\r
	36	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	37	* Change settings from 1 to 0 if you want to disable one or more decoders.\r
	38	* This saves program space.\r
d823e852	39	*\r
cb8474cc	40	* 1 enable decoder\r
cb8474cc	41	* 0 disable decoder\r
d823e852	42	*\r
2eab5ec9	43	* The standard decoders are enabled per default.\r
66c864ba	44	* Less common protocols are disabled here, you need to enable them manually.\r
2eab5ec9	45	*\r
d823e852	46	* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
d823e852	47	* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
08f2dd9d	48	* You cannot enable both DENON and RUWIDO, only enable one of them.\r
cb8474cc	49	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	50	*/\r
d823e852	51	\r
66c864ba	52	// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r
2cfc146d	53	#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r
	54	#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r
	55	#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r
2eab5ec9	56	#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r
770a1a9d	57	#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
53c11f07	58	#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r
35213800	59	\r
66c864ba	60	// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
66c864ba	61	#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r
83b279ab	62	#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r
	63	#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r
	64	#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r
	65	#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r
08f2dd9d	66	#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes\r
2cfc146d	67	#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r
f50e01e7	68	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r
2cfc146d	69	#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r
f50e01e7	70	\r
f50e01e7	71	// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
2cfc146d	72	#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r
2b832dad	73	#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
2b832dad	74	#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
31c1f035	75	#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r
31c1f035	76	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r
63b94f48	77	#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r
66c864ba	78	#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r
a42d1ee6	79	#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
2cfc146d	80	#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r
2b832dad	81	#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
2cfc146d	82	#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r
f50e01e7	83	#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r
d823e852	84	\r
cb8474cc	85	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	86	* Change hardware pin here for ATMEL AVR\r
cb8474cc	87	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	88	*/\r
08f2dd9d	89	#if defined (ATMEL_AVR) // use PB6 as IR input on AVR\r
	90	# define IRMP_PORT_LETTER B\r
	91	# define IRMP_BIT_NUMBER 6\r
cb8474cc	92	\r
cb8474cc	93	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	94	* Change hardware pin here for PIC C18 compiler\r
cb8474cc	95	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	96	*/\r
08f2dd9d	97	#elif defined (PIC_C18) // use RB4 as IR input on PIC\r
08f2dd9d	98	# define IRMP_PIN PORTBbits.RB4\r
cb8474cc	99	\r
6c3c57e6	100	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	101	* Change hardware pin here for PIC CCS compiler\r
6c3c57e6	102	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
6c3c57e6	103	*/\r
08f2dd9d	104	#elif defined (PIC_CCS)\r
08f2dd9d	105	# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
6c3c57e6	106	\r
1f54e86c	107	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	108	* Change hardware pin here for ARM STM32\r
1f54e86c	109	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
1f54e86c	110	*/\r
08f2dd9d	111	#elif defined (ARM_STM32) // use C13 as IR input on STM32\r
	112	# define IRMP_PORT_LETTER C\r
	113	# define IRMP_BIT_NUMBER 13\r
1f54e86c	114	\r
7644ac04	115	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	116	* Handling of unknown target system: DON'T CHANGE\r
7644ac04	117	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
7644ac04	118	*/\r
08f2dd9d	119	#elif !defined (UNIX_OR_WINDOWS)\r
	120	# error target system not defined.\r
	121	#endif\r
7644ac04	122	\r
1aee56bc	123	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	124	* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
1aee56bc	125	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
1aee56bc	126	*/\r
08f2dd9d	127	#ifndef IRMP_LOGGING\r
08f2dd9d	128	# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0\r
770a1a9d	129	#endif\r
770a1a9d	130	\r
08f2dd9d	131	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	132	* Use external logging routines\r
	133	* If you enable external logging, you have also to enable IRMP_LOGGING above\r
	134	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	135	*/\r
	136	#ifndef IRMP_EXT_LOGGING\r
	137	# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0\r
35213800	138	#endif\r
35213800	139	\r
08f2dd9d	140	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	141	* Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r
	142	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	143	*/\r
	144	#ifndef IRMP_PROTOCOL_NAMES\r
	145	# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0\r
35213800	146	#endif\r
35213800	147	\r
08f2dd9d	148	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	149	* Use Callbacks to indicate input signal\r
	150	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	151	*/\r
	152	#ifndef IRMP_USE_CALLBACK\r
	153	# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r
12948cf3	154	#endif\r
12948cf3	155	\r
cb8474cc	156	#endif /* _WC_IRMPCONFIG_H_ */\r