| cb8474cc |
1 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 2 | * irmpconfig.h\r |
| 3 | *\r |
| 08f2dd9d |
4 | * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r |
| cb8474cc |
5 | *\r |
| 0834784c |
6 | * Copyright (c) 2009-2015 Frank Meyer - frank(at)fli4l.de\r |
| 7fe8188d |
7 | * Extensions for PIC 12F1820 W.Strobl 2014-07-20\r |
| 08f2dd9d |
8 | *\r |
| 458a6d64 |
9 | * $Id: irmpconfig.h,v 1.130 2015/05/28 06:46:49 fm Exp $\r |
| cb8474cc |
10 | *\r |
| 11 | * This program is free software; you can redistribute it and/or modify\r |
| 12 | * it under the terms of the GNU General Public License as published by\r |
| 13 | * the Free Software Foundation; either version 2 of the License, or\r |
| 14 | * (at your option) any later version.\r |
| 15 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 16 | */\r |
| 17 | \r |
| 18 | #ifndef _IRMPCONFIG_H_\r |
| 19 | #define _IRMPCONFIG_H_\r |
| 20 | \r |
| 08f2dd9d |
21 | #ifndef _IRMP_H_\r |
| 22 | # error please include only irmp.h, not irmpconfig.h\r |
| 23 | #endif\r |
| 24 | \r |
| cb8474cc |
25 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| d823e852 |
26 | * Change F_INTERRUPTS if you change the number of interrupts per second,\r |
| 35213800 |
27 | * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r |
| 28 | * A value above 15000 costs additional program space, absolute maximum value is 20000.\r |
| 7a844aff |
29 | * On PIC with XC8/C18 Compiler, use 15151 as the correct value.\r |
| cb8474cc |
30 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 31 | */\r |
| b5ea7869 |
32 | #ifndef F_INTERRUPTS\r |
| 08f2dd9d |
33 | # define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r |
| b5ea7869 |
34 | #endif\r |
| cb8474cc |
35 | \r |
| 36 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 37 | * Change settings from 1 to 0 if you want to disable one or more decoders.\r |
| 38 | * This saves program space.\r |
| d823e852 |
39 | *\r |
| cb8474cc |
40 | * 1 enable decoder\r |
| 41 | * 0 disable decoder\r |
| d823e852 |
42 | *\r |
| 2eab5ec9 |
43 | * The standard decoders are enabled per default.\r |
| 66c864ba |
44 | * Less common protocols are disabled here, you need to enable them manually.\r |
| 2eab5ec9 |
45 | *\r |
| d823e852 |
46 | * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r |
| 47 | * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r |
| 08f2dd9d |
48 | * You cannot enable both DENON and RUWIDO, only enable one of them.\r |
| cb8474cc |
49 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 50 | */\r |
| d823e852 |
51 | \r |
| 66c864ba |
52 | // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r |
| 2cfc146d |
53 | #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r |
| 54 | #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r |
| 956ea3ea |
55 | #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes\r |
| 770a1a9d |
56 | #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r |
| 35213800 |
57 | \r |
| 66c864ba |
58 | // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r |
| 03148c47 |
59 | #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r |
| 60 | #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r |
| 61 | #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r |
| 956ea3ea |
62 | #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes\r |
| 63 | #define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes\r |
| 64 | #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r |
| 65 | #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r |
| 03148c47 |
66 | #define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes\r |
| 67 | #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r |
| 68 | #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r |
| 69 | #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r |
| f50e01e7 |
70 | \r |
| 71 | // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r |
| 03148c47 |
72 | #define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes\r |
| 73 | #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r |
| 74 | #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r |
| 458a6d64 |
75 | #define IRMP_SUPPORT_FAN_PROTOCOL 1 // FAN (ventilator) >= 10000 ~50 bytes\r |
| 03148c47 |
76 | #define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes\r |
| 77 | #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r |
| 78 | #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r |
| 79 | #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r |
| 80 | #define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r |
| 81 | #define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r |
| 82 | #define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r |
| 83 | #define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes\r |
| b85cb27d |
84 | #define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r |
| 03148c47 |
85 | #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r |
| 86 | #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r |
| 87 | #define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r |
| 88 | #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r |
| 89 | #define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes\r |
| 90 | #define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r |
| 91 | #define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes\r |
| 69da6090 |
92 | #define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes\r |
| 956ea3ea |
93 | #define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)\r |
| 061e654c |
94 | #define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes\r |
| 003c1008 |
95 | #define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes\r |
| 956ea3ea |
96 | #define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)\r |
| 2fb27bfe |
97 | \r |
| cb8474cc |
98 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| ad4d3d41 |
99 | * Change hardware pin here for ATMEL ATMega/ATTiny/XMega\r |
| cb8474cc |
100 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 101 | */\r |
| ad4d3d41 |
102 | #if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR\r |
| 08f2dd9d |
103 | # define IRMP_PORT_LETTER B\r |
| 104 | # define IRMP_BIT_NUMBER 6\r |
| cb8474cc |
105 | \r |
| 106 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 4a7dc859 |
107 | * Change hardware pin here for PIC C18 or XC8 compiler\r |
| cb8474cc |
108 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 109 | */\r |
| 4a7dc859 |
110 | #elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)\r |
| ad4d3d41 |
111 | # if defined(__12F1840)\r |
| 112 | # define IRMP_PIN RA5 // on 12F1840 with XC8 compiler\r |
| 113 | # else\r |
| 114 | # define IRMP_PIN PORTBbits.RB4 // PIC C18\r |
| 115 | # endif\r |
| cb8474cc |
116 | \r |
| 6c3c57e6 |
117 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 08f2dd9d |
118 | * Change hardware pin here for PIC CCS compiler\r |
| 6c3c57e6 |
119 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 120 | */\r |
| 08f2dd9d |
121 | #elif defined (PIC_CCS)\r |
| 4a7dc859 |
122 | # define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler)\r |
| 6c3c57e6 |
123 | \r |
| 1f54e86c |
124 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 08f2dd9d |
125 | * Change hardware pin here for ARM STM32\r |
| 1f54e86c |
126 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 127 | */\r |
| 08f2dd9d |
128 | #elif defined (ARM_STM32) // use C13 as IR input on STM32\r |
| 129 | # define IRMP_PORT_LETTER C\r |
| 130 | # define IRMP_BIT_NUMBER 13\r |
| 1f54e86c |
131 | \r |
| afd1e690 |
132 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 133 | * Change hardware pin here for Stellaris ARM Cortex M4\r |
| 134 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 135 | */\r |
| 136 | #elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F\r |
| 137 | # define IRMP_PORT_LETTER B\r |
| 138 | # define IRMP_BIT_NUMBER 4\r |
| 139 | \r |
| 7644ac04 |
140 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 08f2dd9d |
141 | * Handling of unknown target system: DON'T CHANGE\r |
| 7644ac04 |
142 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 143 | */\r |
| 08f2dd9d |
144 | #elif !defined (UNIX_OR_WINDOWS)\r |
| 145 | # error target system not defined.\r |
| 146 | #endif\r |
| 7644ac04 |
147 | \r |
| 1aee56bc |
148 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 08f2dd9d |
149 | * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r |
| 1aee56bc |
150 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 151 | */\r |
| 08f2dd9d |
152 | #ifndef IRMP_LOGGING\r |
| 153 | # define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0\r |
| 770a1a9d |
154 | #endif\r |
| 155 | \r |
| 08f2dd9d |
156 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 157 | * Use external logging routines\r |
| 158 | * If you enable external logging, you have also to enable IRMP_LOGGING above\r |
| 159 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 160 | */\r |
| 161 | #ifndef IRMP_EXT_LOGGING\r |
| 162 | # define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0\r |
| 35213800 |
163 | #endif\r |
| 164 | \r |
| 08f2dd9d |
165 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 166 | * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r |
| 167 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 168 | */\r |
| 169 | #ifndef IRMP_PROTOCOL_NAMES\r |
| 170 | # define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0\r |
| 35213800 |
171 | #endif\r |
| 172 | \r |
| 08f2dd9d |
173 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 174 | * Use Callbacks to indicate input signal\r |
| 175 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 176 | */\r |
| 177 | #ifndef IRMP_USE_CALLBACK\r |
| 178 | # define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r |
| 12948cf3 |
179 | #endif\r |
| 180 | \r |
| ad4d3d41 |
181 | #endif // _IRMPCONFIG_H_\r |
projects / irmp.git / blame