[irmp.git] / irmpconfig.h

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * irmpconfig.h\r
 *\r
 * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
 *\r
 * $Id: irmpconfig.h,v 1.37 2010/08/18 12:03:26 fm Exp $\r
 *\r
 * ATMEGA88 @ 8 MHz\r
 *\r
 * This program is free software; you can redistribute it and/or modify\r
 * it under the terms of the GNU General Public License as published by\r
 * the Free Software Foundation; either version 2 of the License, or\r
 * (at your option) any later version.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
#ifndef _IRMPCONFIG_H_\r
#define _IRMPCONFIG_H_\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change F_INTERRUPTS if you change the number of interrupts per second,\r
 * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r
 * A value above 15000 costs additional program space, absolut maximum value is 20000.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef F_INTERRUPTS\r
#define F_INTERRUPTS                            10000   // interrupts per second, min: 10000, max: 15000\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change settings from 1 to 0 if you want to disable one or more decoders.\r
 * This saves program space.\r
 *\r
 * 1 enable  decoder\r
 * 0 disable decoder\r
 *\r
 * The standard decoders are enabled per default.\r
 * Some less common protocols are disabled here, you need to enable them manually.\r
 *\r
 * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
 * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
//      Protocol                                Enable  Remarks                 F_INTERRUPTS        Program Space\r
#define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~100 bytes\r
#define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsung32  >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // Matsushita           >= 10000                  ~50 bytes\r
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_DENON_PROTOCOL             1       // DENON                >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_JVC_PROTOCOL               1       // JVC                  >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_RC5_PROTOCOL               1       // RC5                  >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_RC6_PROTOCOL               1       // RC6                  >= 10000                 ~200 bytes\r
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL           1       // Grundig              >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_NOKIA_PROTOCOL             1       // Nokia                >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_NUBERT_PROTOCOL            1       // NUBERT               >= 10000                  ~50 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      1       // Bang & Olufsen       >= 10000                 ~200 bytes\r
#define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)   ~50 bytes (~400 in combination with RC5)\r
#define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // RC Car               >= 10000 (better 15000)  ~150 bytes (~500 in combination with RC5)\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // Siemens Gigaset      >= 15000                 ~150 bytes\r
#define IRMP_SUPPORT_RECS80_PROTOCOL            0       // RECS80               >= 20000                  ~50 bytes\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // RECS80EXT            >= 20000                  ~50 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here:\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifdef PIC_CCS_COMPILER                                 // PIC CCS Compiler:\r
\r
#define IRMP_PIN                                PIN_B4  // use PB4 as IR input on PIC\r
\r
#else                                                   // AVR:\r
\r
#define IRMP_PORT                               PORTB\r
#define IRMP_DDR                                DDRB\r
#define IRMP_PIN                                PINB\r
#define IRMP_BIT                                6       // use PB6 as IR input on AVR\r
\r
#define input(x)                                ((x) & (1 << IRMP_BIT))\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_LOGGING\r
#define IRMP_LOGGING                            0       // 1: log IR signal (scan), 0: do not (default)\r
#endif\r
\r
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
#undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0\r
#endif\r
\r
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)\r
#undef IRMP_SUPPORT_RECS80_PROTOCOL\r
#define IRMP_SUPPORT_RECS80_PROTOCOL            0\r
#endif\r
\r
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)\r
#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0\r
#endif\r
\r
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
#warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
#undef IRMP_SUPPORT_NEC_PROTOCOL\r
#define IRMP_SUPPORT_NEC_PROTOCOL               1\r
#endif\r
\r
#endif /* _WC_IRMPCONFIG_H_ */\r
Commit	Line	Data
cb8474cc	1	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	2	* irmpconfig.h\r
	3	*\r
	4	* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
	5	*\r
770a1a9d	6	* $Id: irmpconfig.h,v 1.37 2010/08/18 12:03:26 fm Exp $\r
cb8474cc	7	*\r
	8	* ATMEGA88 @ 8 MHz\r
	9	*\r
	10	* This program is free software; you can redistribute it and/or modify\r
	11	* it under the terms of the GNU General Public License as published by\r
	12	* the Free Software Foundation; either version 2 of the License, or\r
	13	* (at your option) any later version.\r
	14	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	15	*/\r
	16	\r
	17	#ifndef _IRMPCONFIG_H_\r
	18	#define _IRMPCONFIG_H_\r
	19	\r
	20	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
d823e852	21	* Change F_INTERRUPTS if you change the number of interrupts per second,\r
	22	* Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r
	23	* A value above 15000 costs additional program space, absolut maximum value is 20000.\r
cb8474cc	24	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	25	*/\r
b5ea7869	26	#ifndef F_INTERRUPTS\r
879b06c2	27	#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000\r
b5ea7869	28	#endif\r
cb8474cc	29	\r
	30	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	31	* Change settings from 1 to 0 if you want to disable one or more decoders.\r
	32	* This saves program space.\r
d823e852	33	*\r
cb8474cc	34	* 1 enable decoder\r
cb8474cc	35	* 0 disable decoder\r
d823e852	36	*\r
2eab5ec9	37	* The standard decoders are enabled per default.\r
	38	* Some less common protocols are disabled here, you need to enable them manually.\r
	39	*\r
d823e852	40	* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
d823e852	41	* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
cb8474cc	42	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	43	*/\r
d823e852	44	\r
2eab5ec9	45	// Protocol Enable Remarks F_INTERRUPTS Program Space\r
	46	#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes\r
	47	#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes\r
	48	#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes\r
	49	#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r
770a1a9d	50	#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
	51	#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON >= 10000 ~250 bytes\r
	52	#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~250 bytes\r
	53	#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes\r
	54	#define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 >= 10000 ~200 bytes\r
	55	#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~150 bytes\r
	56	#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~150 bytes\r
	57	#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // NUBERT >= 10000 ~50 bytes\r
	58	#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // Bang & Olufsen >= 10000 ~200 bytes\r
2eab5ec9	59	#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)\r
	60	#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
	61	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes\r
	62	#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes\r
	63	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes\r
d823e852	64	\r
cb8474cc	65	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	66	* Change hardware pin here:\r
	67	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	68	*/\r
	69	#ifdef PIC_CCS_COMPILER // PIC CCS Compiler:\r
	70	\r
	71	#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
	72	\r
	73	#else // AVR:\r
	74	\r
	75	#define IRMP_PORT PORTB\r
	76	#define IRMP_DDR DDRB\r
	77	#define IRMP_PIN PINB\r
	78	#define IRMP_BIT 6 // use PB6 as IR input on AVR\r
	79	\r
	80	#define input(x) ((x) & (1 << IRMP_BIT))\r
	81	#endif\r
	82	\r
	83	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	84	* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
	85	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	86	*/\r
879b06c2	87	#ifndef IRMP_LOGGING\r
	88	#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
	89	#endif\r
cb8474cc	90	\r
2eab5ec9	91	#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
2eab5ec9	92	#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
f613f7dc	93	#undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
f613f7dc	94	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
2eab5ec9	95	#endif\r
	96	\r
	97	#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
	98	#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)\r
f613f7dc	99	#undef IRMP_SUPPORT_RECS80_PROTOCOL\r
f613f7dc	100	#define IRMP_SUPPORT_RECS80_PROTOCOL 0\r
2eab5ec9	101	#endif\r
	102	\r
	103	#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
	104	#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)\r
f613f7dc	105	#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
f613f7dc	106	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r
2eab5ec9	107	#endif\r
2eab5ec9	108	\r
770a1a9d	109	#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
	110	#warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
	111	#undef IRMP_SUPPORT_NEC_PROTOCOL\r
	112	#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
	113	#endif\r
	114	\r
cb8474cc	115	#endif /* _WC_IRMPCONFIG_H_ */\r