]>
Commit | Line | Data |
---|---|---|
cb8474cc | 1 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
2 | * irmpconfig.h\r | |
3 | *\r | |
f50e01e7 | 4 | * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de\r |
cb8474cc | 5 | *\r |
7644ac04 | 6 | * $Id: irmpconfig.h,v 1.74 2011/09/11 13:17:38 fm Exp $\r |
cb8474cc | 7 | *\r |
8 | * ATMEGA88 @ 8 MHz\r | |
9 | *\r | |
10 | * This program is free software; you can redistribute it and/or modify\r | |
11 | * it under the terms of the GNU General Public License as published by\r | |
12 | * the Free Software Foundation; either version 2 of the License, or\r | |
13 | * (at your option) any later version.\r | |
14 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
15 | */\r | |
16 | \r | |
17 | #ifndef _IRMPCONFIG_H_\r | |
18 | #define _IRMPCONFIG_H_\r | |
19 | \r | |
20 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
d823e852 | 21 | * Change F_INTERRUPTS if you change the number of interrupts per second,\r |
35213800 | 22 | * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r |
23 | * A value above 15000 costs additional program space, absolute maximum value is 20000.\r | |
cb8474cc | 24 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
25 | */\r | |
b5ea7869 | 26 | #ifndef F_INTERRUPTS\r |
35213800 | 27 | #define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r |
b5ea7869 | 28 | #endif\r |
cb8474cc | 29 | \r |
30 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
31 | * Change settings from 1 to 0 if you want to disable one or more decoders.\r | |
32 | * This saves program space.\r | |
d823e852 | 33 | *\r |
cb8474cc | 34 | * 1 enable decoder\r |
35 | * 0 disable decoder\r | |
d823e852 | 36 | *\r |
2eab5ec9 | 37 | * The standard decoders are enabled per default.\r |
66c864ba | 38 | * Less common protocols are disabled here, you need to enable them manually.\r |
2eab5ec9 | 39 | *\r |
d823e852 | 40 | * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r |
41 | * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r | |
cb8474cc | 42 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
43 | */\r | |
d823e852 | 44 | \r |
66c864ba | 45 | // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r |
2cfc146d | 46 | #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r |
47 | #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r | |
48 | #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r | |
2eab5ec9 | 49 | #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r |
770a1a9d | 50 | #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r |
53c11f07 | 51 | #define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r |
35213800 | 52 | \r |
66c864ba | 53 | // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r |
54 | #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r | |
f50e01e7 | 55 | #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r |
35213800 | 56 | #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r |
7644ac04 | 57 | #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r |
58 | #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r | |
2cfc146d | 59 | #define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes\r |
60 | #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r | |
f50e01e7 | 61 | #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r |
2cfc146d | 62 | #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r |
f50e01e7 | 63 | \r |
64 | // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r | |
2cfc146d | 65 | #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r |
2b832dad | 66 | #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r |
67 | #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r | |
31c1f035 | 68 | #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r |
69 | #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r | |
63b94f48 | 70 | #define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r |
66c864ba | 71 | #define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r |
a42d1ee6 | 72 | #define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r |
2cfc146d | 73 | #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r |
2b832dad | 74 | #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r |
2cfc146d | 75 | #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r |
f50e01e7 | 76 | #define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r |
d823e852 | 77 | \r |
cb8474cc | 78 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
79 | * Change hardware pin here:\r | |
80 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
81 | */\r | |
82 | #ifdef PIC_CCS_COMPILER // PIC CCS Compiler:\r | |
83 | \r | |
84 | #define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r | |
85 | \r | |
86 | #else // AVR:\r | |
87 | \r | |
88 | #define IRMP_PORT PORTB\r | |
89 | #define IRMP_DDR DDRB\r | |
90 | #define IRMP_PIN PINB\r | |
91 | #define IRMP_BIT 6 // use PB6 as IR input on AVR\r | |
92 | \r | |
93 | #define input(x) ((x) & (1 << IRMP_BIT))\r | |
94 | #endif\r | |
95 | \r | |
96 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
97 | * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r | |
98 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
99 | */\r | |
879b06c2 | 100 | #ifndef IRMP_LOGGING\r |
101 | #define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r | |
102 | #endif\r | |
cb8474cc | 103 | \r |
1f54e86c | 104 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
105 | * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r | |
106 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
107 | */\r | |
108 | #define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not (default),\r | |
109 | \r | |
7644ac04 | 110 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
111 | * Use Callbacks to indicate input signal\r | |
112 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
113 | */\r | |
114 | #define IRMP_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0\r | |
115 | \r | |
1aee56bc | 116 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
117 | * DO NOT CHANGE THE FOLLOWING LINES !\r | |
118 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
119 | */\r | |
2eab5ec9 | 120 | #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
121 | #warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r | |
f613f7dc | 122 | #undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r |
123 | #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r | |
2eab5ec9 | 124 | #endif\r |
125 | \r | |
12948cf3 | 126 | #if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
127 | #warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)\r | |
128 | #undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r | |
129 | #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r | |
130 | #endif\r | |
131 | \r | |
a42d1ee6 | 132 | #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
133 | #warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)\r | |
f613f7dc | 134 | #undef IRMP_SUPPORT_RECS80_PROTOCOL\r |
135 | #define IRMP_SUPPORT_RECS80_PROTOCOL 0\r | |
2eab5ec9 | 136 | #endif\r |
137 | \r | |
a42d1ee6 | 138 | #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
139 | #warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)\r | |
f613f7dc | 140 | #undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r |
141 | #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r | |
2eab5ec9 | 142 | #endif\r |
143 | \r | |
f50e01e7 | 144 | #if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000\r |
145 | #warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)\r | |
146 | #undef IRMP_SUPPORT_LEGO_PROTOCOL\r | |
147 | #define IRMP_SUPPORT_LEGO_PROTOCOL 0\r | |
148 | #endif\r | |
149 | \r | |
770a1a9d | 150 | #if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r |
151 | #warning JVC protocol needs also NEC protocol, NEC protocol enabled\r | |
152 | #undef IRMP_SUPPORT_NEC_PROTOCOL\r | |
153 | #define IRMP_SUPPORT_NEC_PROTOCOL 1\r | |
154 | #endif\r | |
155 | \r | |
35213800 | 156 | #if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r |
157 | #warning NEC16 protocol needs also NEC protocol, NEC protocol enabled\r | |
158 | #undef IRMP_SUPPORT_NEC_PROTOCOL\r | |
159 | #define IRMP_SUPPORT_NEC_PROTOCOL 1\r | |
160 | #endif\r | |
161 | \r | |
162 | #if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r | |
163 | #warning NEC42 protocol needs also NEC protocol, NEC protocol enabled\r | |
164 | #undef IRMP_SUPPORT_NEC_PROTOCOL\r | |
165 | #define IRMP_SUPPORT_NEC_PROTOCOL 1\r | |
166 | #endif\r | |
167 | \r | |
12948cf3 | 168 | #if F_INTERRUPTS > 20000\r |
35213800 | 169 | #error F_INTERRUPTS too high (should be not greater than 20000)\r |
12948cf3 | 170 | #endif\r |
171 | \r | |
cb8474cc | 172 | #endif /* _WC_IRMPCONFIG_H_ */\r |