[irmp.git] / irmpconfig.h

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * irmpconfig.h\r
 *\r
 * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
 *\r
 * $Id: irmpconfig.h,v 1.22 2010/06/15 12:02:52 fm Exp $\r
 *\r
 * ATMEGA88 @ 8 MHz\r
 *\r
 * This program is free software; you can redistribute it and/or modify\r
 * it under the terms of the GNU General Public License as published by\r
 * the Free Software Foundation; either version 2 of the License, or\r
 * (at your option) any later version.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
#ifndef _IRMPCONFIG_H_\r
#define _IRMPCONFIG_H_\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef F_INTERRUPTS\r
#define F_INTERRUPTS                            10000   // interrupts per second, min: 10000, max: 15000\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change settings from 1 to 0 if you want to disable one or more decoders.\r
 * This saves program space.\r
 * 1 enable  decoder\r
 * 0 disable decoder\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // flag: support SIRCS                 uses ~100 bytes\r
#define IRMP_SUPPORT_NEC_PROTOCOL               1       // flag: support NEC + APPLE           uses ~250 bytes\r
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // flag: support Samsung + Samsung32   uses ~250 bytes\r
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // flag: support Matsushita            uses  ~50 bytes\r
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // flag: support Kaseikyo              uses  ~50 bytes\r
#define IRMP_SUPPORT_RECS80_PROTOCOL            1       // flag: support RECS80                uses  ~50 bytes\r
#define IRMP_SUPPORT_RC5_PROTOCOL               1       // flag: support RC5                   uses ~250 bytes\r
#define IRMP_SUPPORT_DENON_PROTOCOL             1       // flag: support DENON                 uses ~250 bytes\r
#define IRMP_SUPPORT_RC6_PROTOCOL               1       // flag: support RC6                   uses ~200 bytes\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         1       // flag: support RECS80EXT             uses  ~50 bytes\r
#define IRMP_SUPPORT_NUBERT_PROTOCOL            1       // flag: support NUBERT                uses  ~50 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      1       // flag: support Bang & Olufsen        uses ~200 bytes\r
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL           1       // flag: support Grundig               uses ~150 bytes\r
#define IRMP_SUPPORT_NOKIA_PROTOCOL             1       // flag: support Nokia                 uses ~150 bytes\r
#define IRMP_SUPPORT_FDC_PROTOCOL               0       // flag: support FDC3402 keyboard      uses  ~50 bytes\r
#define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // flag: support RC car                uses ~150 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS > 14500!\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#if F_INTERRUPTS >= 14500\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           1       // flag: support Siemens Gigaset       uses ~150 bytes\r
#else\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // DO NOT CHANGE! F_INTERRUPTS too low!\r
#endif\r
\r
#if IRMP_SUPPORT_FDC_PROTOCOL == 1 && IRMP_SUPPORT_RC5_PROTOCOL == 1\r
#error Protocols RC5 and FDC may not be enabled both at the same time. Please disable one of them in irmpconfig.h.\r
#endif\r
\r
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1 && IRMP_SUPPORT_RC5_PROTOCOL == 1\r
#error Protocols RC5 and RCCAR may not be enabled both at the same time. Please disable one of them in irmpconfig.h.\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here:\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifdef PIC_CCS_COMPILER                                 // PIC CCS Compiler:\r
\r
#define IRMP_PIN                                PIN_B4  // use PB4 as IR input on PIC\r
\r
#else                                                   // AVR:\r
\r
#define IRMP_PORT                               PORTB\r
#define IRMP_DDR                                DDRB\r
#define IRMP_PIN                                PINB\r
#define IRMP_BIT                                6       // use PB6 as IR input on AVR\r
\r
#define input(x)                                ((x) & (1 << IRMP_BIT))\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_LOGGING\r
#define IRMP_LOGGING                            0       // 1: log IR signal (scan), 0: do not (default)\r
#endif\r
\r
#endif /* _WC_IRMPCONFIG_H_ */\r
Commit	Line	Data
cb8474cc	1	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	2	* irmpconfig.h\r
	3	*\r
	4	* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
	5	*\r
586dc529	6	* $Id: irmpconfig.h,v 1.22 2010/06/15 12:02:52 fm Exp $\r
cb8474cc	7	*\r
	8	* ATMEGA88 @ 8 MHz\r
	9	*\r
	10	* This program is free software; you can redistribute it and/or modify\r
	11	* it under the terms of the GNU General Public License as published by\r
	12	* the Free Software Foundation; either version 2 of the License, or\r
	13	* (at your option) any later version.\r
	14	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	15	*/\r
	16	\r
	17	#ifndef _IRMPCONFIG_H_\r
	18	#define _IRMPCONFIG_H_\r
	19	\r
	20	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	21	* Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
	22	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	23	*/\r
b5ea7869	24	#ifndef F_INTERRUPTS\r
879b06c2	25	#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000\r
b5ea7869	26	#endif\r
cb8474cc	27	\r
	28	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	29	* Change settings from 1 to 0 if you want to disable one or more decoders.\r
	30	* This saves program space.\r
	31	* 1 enable decoder\r
	32	* 0 disable decoder\r
	33	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	34	*/\r
b5ea7869	35	#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~100 bytes\r
	36	#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes\r
	37	#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes\r
	38	#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes\r
	39	#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes\r
	40	#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~50 bytes\r
48664931	41	#define IRMP_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes\r
b5ea7869	42	#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes\r
	43	#define IRMP_SUPPORT_RC6_PROTOCOL 1 // flag: support RC6 uses ~200 bytes\r
	44	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~50 bytes\r
	45	#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~50 bytes\r
	46	#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang & Olufsen uses ~200 bytes\r
	47	#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // flag: support Grundig uses ~150 bytes\r
	48	#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // flag: support Nokia uses ~150 bytes\r
586dc529	49	#define IRMP_SUPPORT_FDC_PROTOCOL 0 // flag: support FDC3402 keyboard uses ~50 bytes\r
48664931	50	#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // flag: support RC car uses ~150 bytes\r
b5ea7869	51	\r
	52	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	53	* THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS > 14500!\r
	54	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	55	*/\r
	56	#if F_INTERRUPTS >= 14500\r
	57	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // flag: support Siemens Gigaset uses ~150 bytes\r
b5ea7869	58	#else\r
b5ea7869	59	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
77f488bb	60	#endif\r
77f488bb	61	\r
48664931	62	#if IRMP_SUPPORT_FDC_PROTOCOL == 1 && IRMP_SUPPORT_RC5_PROTOCOL == 1\r
48664931	63	#error Protocols RC5 and FDC may not be enabled both at the same time. Please disable one of them in irmpconfig.h.\r
b5ea7869	64	#endif\r
cb8474cc	65	\r
48664931	66	#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1 && IRMP_SUPPORT_RC5_PROTOCOL == 1\r
48664931	67	#error Protocols RC5 and RCCAR may not be enabled both at the same time. Please disable one of them in irmpconfig.h.\r
02dbaeff	68	#endif\r
02dbaeff	69	\r
cb8474cc	70	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	71	* Change hardware pin here:\r
	72	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	73	*/\r
	74	#ifdef PIC_CCS_COMPILER // PIC CCS Compiler:\r
	75	\r
	76	#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
	77	\r
	78	#else // AVR:\r
	79	\r
	80	#define IRMP_PORT PORTB\r
	81	#define IRMP_DDR DDRB\r
	82	#define IRMP_PIN PINB\r
	83	#define IRMP_BIT 6 // use PB6 as IR input on AVR\r
	84	\r
	85	#define input(x) ((x) & (1 << IRMP_BIT))\r
	86	#endif\r
	87	\r
	88	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	89	* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
	90	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	91	*/\r
879b06c2	92	#ifndef IRMP_LOGGING\r
	93	#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
	94	#endif\r
cb8474cc	95	\r
cb8474cc	96	#endif /* _WC_IRMPCONFIG_H_ */\r