[irmp.git] / irmpconfig.h

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * irmpconfig.h\r
 *\r
 * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
 *\r
 * $Id: irmpconfig.h,v 1.28 2010/06/22 15:41:38 fm Exp $\r
 *\r
 * ATMEGA88 @ 8 MHz\r
 *\r
 * This program is free software; you can redistribute it and/or modify\r
 * it under the terms of the GNU General Public License as published by\r
 * the Free Software Foundation; either version 2 of the License, or\r
 * (at your option) any later version.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
#ifndef _IRMPCONFIG_H_\r
#define _IRMPCONFIG_H_\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change F_INTERRUPTS if you change the number of interrupts per second,\r
 * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r
 * A value above 15000 costs additional program space, absolut maximum value is 20000.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef F_INTERRUPTS\r
#define F_INTERRUPTS                            10000   // interrupts per second, min: 10000, max: 15000\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change settings from 1 to 0 if you want to disable one or more decoders.\r
 * This saves program space.\r
 *\r
 * 1 enable  decoder\r
 * 0 disable decoder\r
 *\r
 * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
 * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
// Standard protocols: default is enabled. Change to 0 to save program space:\r
\r
#define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // flag: support Sony SIRCS            uses ~100 bytes\r
#define IRMP_SUPPORT_NEC_PROTOCOL               1       // flag: support NEC + APPLE           uses ~250 bytes\r
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // flag: support Samsung + Samsung32   uses ~250 bytes\r
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // flag: support Matsushita            uses  ~50 bytes\r
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // flag: support Kaseikyo              uses  ~50 bytes\r
#define IRMP_SUPPORT_DENON_PROTOCOL             1       // flag: support DENON                 uses ~250 bytes\r
\r
\r
// Non-standard protocols: default is disabled. Change to 1 to enable decoder:\r
\r
#define IRMP_SUPPORT_RC5_PROTOCOL               0       // flag: support RC5                   uses ~250 bytes\r
#define IRMP_SUPPORT_RC6_PROTOCOL               0       // flag: support RC6                   uses ~200 bytes\r
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // flag: support Grundig               uses ~150 bytes\r
#define IRMP_SUPPORT_NOKIA_PROTOCOL             0       // flag: support Nokia                 uses ~150 bytes\r
#define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // flag: support NUBERT                uses  ~50 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // flag: support Bang & Olufsen        uses ~200 bytes\r
#define IRMP_SUPPORT_FDC_PROTOCOL               0       // flag: support FDC3402 keyboard      uses  ~50/400 bytes\r
#define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // flag: support RC car                uses ~150/500 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 14500!\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#if F_INTERRUPTS >= 14500\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // flag: support Siemens Gigaset       uses ~150 bytes\r
#else\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // DO NOT CHANGE! F_INTERRUPTS too low!\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 20000!\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#if F_INTERRUPTS >= 20000\r
#define IRMP_SUPPORT_RECS80_PROTOCOL            0       // flag: support RECS80                uses  ~50 bytes\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // flag: support RECS80EXT             uses  ~50 bytes\r
#else\r
#define IRMP_SUPPORT_RECS80_PROTOCOL            0       // DO NOT CHANGE! F_INTERRUPTS too low!\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // DO NOT CHANGE! F_INTERRUPTS too low!\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here:\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifdef PIC_CCS_COMPILER                                 // PIC CCS Compiler:\r
\r
#define IRMP_PIN                                PIN_B4  // use PB4 as IR input on PIC\r
\r
#else                                                   // AVR:\r
\r
#define IRMP_PORT                               PORTB\r
#define IRMP_DDR                                DDRB\r
#define IRMP_PIN                                PINB\r
#define IRMP_BIT                                6       // use PB6 as IR input on AVR\r
\r
#define input(x)                                ((x) & (1 << IRMP_BIT))\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_LOGGING\r
#define IRMP_LOGGING                            0       // 1: log IR signal (scan), 0: do not (default)\r
#endif\r
\r
#endif /* _WC_IRMPCONFIG_H_ */\r
Commit	Line	Data
cb8474cc	1	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	2	* irmpconfig.h\r
	3	*\r
	4	* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
	5	*\r
d823e852	6	* $Id: irmpconfig.h,v 1.28 2010/06/22 15:41:38 fm Exp $\r
cb8474cc	7	*\r
	8	* ATMEGA88 @ 8 MHz\r
	9	*\r
	10	* This program is free software; you can redistribute it and/or modify\r
	11	* it under the terms of the GNU General Public License as published by\r
	12	* the Free Software Foundation; either version 2 of the License, or\r
	13	* (at your option) any later version.\r
	14	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	15	*/\r
	16	\r
	17	#ifndef _IRMPCONFIG_H_\r
	18	#define _IRMPCONFIG_H_\r
	19	\r
	20	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
d823e852	21	* Change F_INTERRUPTS if you change the number of interrupts per second,\r
	22	* Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r
	23	* A value above 15000 costs additional program space, absolut maximum value is 20000.\r
cb8474cc	24	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	25	*/\r
b5ea7869	26	#ifndef F_INTERRUPTS\r
879b06c2	27	#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000\r
b5ea7869	28	#endif\r
cb8474cc	29	\r
	30	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	31	* Change settings from 1 to 0 if you want to disable one or more decoders.\r
	32	* This saves program space.\r
d823e852	33	*\r
cb8474cc	34	* 1 enable decoder\r
cb8474cc	35	* 0 disable decoder\r
d823e852	36	*\r
	37	* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
	38	* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
cb8474cc	39	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	40	*/\r
d823e852	41	\r
	42	// Standard protocols: default is enabled. Change to 0 to save program space:\r
	43	\r
	44	#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support Sony SIRCS uses ~100 bytes\r
b5ea7869	45	#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes\r
	46	#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes\r
	47	#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes\r
	48	#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes\r
b5ea7869	49	#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes\r
d823e852	50	\r
	51	\r
	52	// Non-standard protocols: default is disabled. Change to 1 to enable decoder:\r
	53	\r
	54	#define IRMP_SUPPORT_RC5_PROTOCOL 0 // flag: support RC5 uses ~250 bytes\r
	55	#define IRMP_SUPPORT_RC6_PROTOCOL 0 // flag: support RC6 uses ~200 bytes\r
	56	#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // flag: support Grundig uses ~150 bytes\r
	57	#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // flag: support Nokia uses ~150 bytes\r
	58	#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // flag: support NUBERT uses ~50 bytes\r
	59	#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // flag: support Bang & Olufsen uses ~200 bytes\r
6f750020	60	#define IRMP_SUPPORT_FDC_PROTOCOL 0 // flag: support FDC3402 keyboard uses ~50/400 bytes\r
6f750020	61	#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // flag: support RC car uses ~150/500 bytes\r
b5ea7869	62	\r
b5ea7869	63	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
d823e852	64	* THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 14500!\r
b5ea7869	65	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	66	*/\r
	67	#if F_INTERRUPTS >= 14500\r
d823e852	68	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // flag: support Siemens Gigaset uses ~150 bytes\r
b5ea7869	69	#else\r
b5ea7869	70	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
77f488bb	71	#endif\r
77f488bb	72	\r
d823e852	73	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	74	* THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 20000!\r
	75	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	76	*/\r
	77	#if F_INTERRUPTS >= 20000\r
	78	#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // flag: support RECS80 uses ~50 bytes\r
	79	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // flag: support RECS80EXT uses ~50 bytes\r
	80	#else\r
	81	#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
	82	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
	83	#endif\r
	84	\r
cb8474cc	85	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	86	* Change hardware pin here:\r
	87	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	88	*/\r
	89	#ifdef PIC_CCS_COMPILER // PIC CCS Compiler:\r
	90	\r
	91	#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
	92	\r
	93	#else // AVR:\r
	94	\r
	95	#define IRMP_PORT PORTB\r
	96	#define IRMP_DDR DDRB\r
	97	#define IRMP_PIN PINB\r
	98	#define IRMP_BIT 6 // use PB6 as IR input on AVR\r
	99	\r
	100	#define input(x) ((x) & (1 << IRMP_BIT))\r
	101	#endif\r
	102	\r
	103	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	104	* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
	105	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	106	*/\r
879b06c2	107	#ifndef IRMP_LOGGING\r
	108	#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
	109	#endif\r
cb8474cc	110	\r
cb8474cc	111	#endif /* _WC_IRMPCONFIG_H_ */\r