cloudbase.mooo.com Git - irmp.git/blame_incremental

Commit	Line	Data
	1	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	2	* irmpconfig.h\r
	3	*\r
	4	* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r
	5	*\r
	6	* Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de\r
	7	*\r
	8	* $Id: irmpconfig.h,v 1.101 2013/04/09 12:02:51 fm Exp $\r
	9	*\r
	10	* ATMEGA88 @ 8 MHz\r
	11	*\r
	12	* This program is free software; you can redistribute it and/or modify\r
	13	* it under the terms of the GNU General Public License as published by\r
	14	* the Free Software Foundation; either version 2 of the License, or\r
	15	* (at your option) any later version.\r
	16	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	17	*/\r
	18	\r
	19	#ifndef _IRMPCONFIG_H_\r
	20	#define _IRMPCONFIG_H_\r
	21	\r
	22	#ifndef _IRMP_H_\r
	23	# error please include only irmp.h, not irmpconfig.h\r
	24	#endif\r
	25	\r
	26	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	27	* Change F_INTERRUPTS if you change the number of interrupts per second,\r
	28	* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
	29	* A value above 15000 costs additional program space, absolute maximum value is 20000.\r
	30	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	31	*/\r
	32	#ifndef F_INTERRUPTS\r
	33	# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r
	34	#endif\r
	35	\r
	36	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	37	* Change settings from 1 to 0 if you want to disable one or more decoders.\r
	38	* This saves program space.\r
	39	*\r
	40	* 1 enable decoder\r
	41	* 0 disable decoder\r
	42	*\r
	43	* The standard decoders are enabled per default.\r
	44	* Less common protocols are disabled here, you need to enable them manually.\r
	45	*\r
	46	* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
	47	* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
	48	* You cannot enable both DENON and RUWIDO, only enable one of them.\r
	49	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	50	*/\r
	51	\r
	52	// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r
	53	#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r
	54	#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r
	55	#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r
	56	#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r
	57	#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
	58	#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r
	59	\r
	60	// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
	61	#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r
	62	#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r
	63	#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r
	64	#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r
	65	#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r
	66	#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes\r
	67	#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r
	68	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r
	69	#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r
	70	\r
	71	// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
	72	#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes\r
	73	#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r
	74	#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
	75	#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
	76	#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r
	77	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r
	78	#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r
	79	#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r
	80	#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
	81	#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes\r
	82	#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r
	83	#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r
	84	#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
	85	#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r
	86	#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r
	87	#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes\r
	88	#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r
	89	\r
	90	\r
	91	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	92	* Change hardware pin here for ATMEL AVR\r
	93	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	94	*/\r
	95	#if defined (ATMEL_AVR) // use PB6 as IR input on AVR\r
	96	# define IRMP_PORT_LETTER B\r
	97	# define IRMP_BIT_NUMBER 6\r
	98	\r
	99	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	100	* Change hardware pin here for PIC C18 compiler\r
	101	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	102	*/\r
	103	#elif defined (PIC_C18) // use RB4 as IR input on PIC\r
	104	# define IRMP_PIN PORTBbits.RB4\r
	105	\r
	106	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	107	* Change hardware pin here for PIC CCS compiler\r
	108	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	109	*/\r
	110	#elif defined (PIC_CCS)\r
	111	# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
	112	\r
	113	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	114	* Change hardware pin here for ARM STM32\r
	115	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	116	*/\r
	117	#elif defined (ARM_STM32) // use C13 as IR input on STM32\r
	118	# define IRMP_PORT_LETTER C\r
	119	# define IRMP_BIT_NUMBER 13\r
	120	\r
	121	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	122	* Change hardware pin here for Stellaris ARM Cortex M4\r
	123	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	124	*/\r
	125	#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F\r
	126	# define IRMP_PORT_LETTER B\r
	127	# define IRMP_BIT_NUMBER 4\r
	128	\r
	129	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	130	* Handling of unknown target system: DON'T CHANGE\r
	131	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	132	*/\r
	133	#elif !defined (UNIX_OR_WINDOWS)\r
	134	# error target system not defined.\r
	135	#endif\r
	136	\r
	137	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	138	* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
	139	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	140	*/\r
	141	#ifndef IRMP_LOGGING\r
	142	# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0\r
	143	#endif\r
	144	\r
	145	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	146	* Use external logging routines\r
	147	* If you enable external logging, you have also to enable IRMP_LOGGING above\r
	148	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	149	*/\r
	150	#ifndef IRMP_EXT_LOGGING\r
	151	# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0\r
	152	#endif\r
	153	\r
	154	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	155	* Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r
	156	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	157	*/\r
	158	#ifndef IRMP_PROTOCOL_NAMES\r
	159	# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0\r
	160	#endif\r
	161	\r
	162	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	163	* Use Callbacks to indicate input signal\r
	164	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	165	*/\r
	166	#ifndef IRMP_USE_CALLBACK\r
	167	# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r
	168	#endif\r
	169	\r
	170	#endif /* _WC_IRMPCONFIG_H_ */\r

1

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

2

* irmpconfig.h\r

3

*\r

4

* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r

*\r

*\r

* $Id: irmpconfig.h,v 1.101 2013/04/09 12:02:51 fm Exp $\r

*\r

* ATMEGA88 @ 8 MHz\r

*\r

* This program is free software; you can redistribute it and/or modify\r

13

* it under the terms of the GNU General Public License as published by\r

14

* the Free Software Foundation; either version 2 of the License, or\r

15

* (at your option) any later version.\r

16

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

17

*/\r

18

\r

19

#ifndef _IRMPCONFIG_H_\r

20

#define _IRMPCONFIG_H_\r

21

\r

22

#ifndef _IRMP_H_\r

23

# error please include only irmp.h, not irmpconfig.h\r

24

#endif\r

25

\r

26

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

27

* Change F_INTERRUPTS if you change the number of interrupts per second,\r

28

* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r

29

* A value above 15000 costs additional program space, absolute maximum value is 20000.\r

30

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

31

*/\r

32

#ifndef F_INTERRUPTS\r

33

# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r

34

#endif\r

35

\r

36

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

37

* Change settings from 1 to 0 if you want to disable one or more decoders.\r

38

* This saves program space.\r

39

*\r

40

* 1 enable decoder\r

41

* 0 disable decoder\r

42

*\r

43

* The standard decoders are enabled per default.\r

44

* Less common protocols are disabled here, you need to enable them manually.\r

45

*\r

46

* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r

47

* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r

48

* You cannot enable both DENON and RUWIDO, only enable one of them.\r

49

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

50

*/\r

51

\r

52

// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r

53

#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r

54

#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r

55

#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r

56

#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r

57

#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r

58

#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r

59

\r

60

// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r

61

#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r

62

#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r

63

#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r

64

#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r

65

#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r

66

#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes\r

67

#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r

68

#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r

69

#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r

70

\r

71

// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r

72

#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes\r

73

#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r

74

#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r

75

#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r

76

#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r

77

#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r

78

#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r

79

#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r

80

#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r

81

#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes\r

82

#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r

83

#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r

84

#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r

85

#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r

86

#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r

87

#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes\r

88

#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r

89

\r

90

\r

91

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

92

* Change hardware pin here for ATMEL AVR\r

93

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

94

*/\r

95

#if defined (ATMEL_AVR) // use PB6 as IR input on AVR\r

96

# define IRMP_PORT_LETTER B\r

97

# define IRMP_BIT_NUMBER 6\r

98

\r

99

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

100

* Change hardware pin here for PIC C18 compiler\r

101

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

102

*/\r

103

#elif defined (PIC_C18) // use RB4 as IR input on PIC\r

104

# define IRMP_PIN PORTBbits.RB4\r

105

\r

106

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

107

* Change hardware pin here for PIC CCS compiler\r

108

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

109

*/\r

110

#elif defined (PIC_CCS)\r

111

# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r

112

\r

113

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

114

* Change hardware pin here for ARM STM32\r

115

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

116

*/\r

117

#elif defined (ARM_STM32) // use C13 as IR input on STM32\r

118

# define IRMP_PORT_LETTER C\r

119

# define IRMP_BIT_NUMBER 13\r

120

\r

121

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

122

* Change hardware pin here for Stellaris ARM Cortex M4\r

123

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

124

*/\r

125

#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F\r

126

# define IRMP_PORT_LETTER B\r

127

# define IRMP_BIT_NUMBER 4\r

128

\r

129

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

130

* Handling of unknown target system: DON'T CHANGE\r

131

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

132

*/\r

133

#elif !defined (UNIX_OR_WINDOWS)\r

134

# error target system not defined.\r

135

#endif\r

136

\r

137

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

138

* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r

139

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

140

*/\r

141

#ifndef IRMP_LOGGING\r

142

# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0\r

143

#endif\r

144

\r

145

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

146

* Use external logging routines\r

147

* If you enable external logging, you have also to enable IRMP_LOGGING above\r

148

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

149

*/\r

150

#ifndef IRMP_EXT_LOGGING\r

151

# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0\r

152

#endif\r

153

\r

154

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

155

* Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r

156

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

157

*/\r

158

#ifndef IRMP_PROTOCOL_NAMES\r

159

# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0\r

160

#endif\r

161

\r

162

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

163

* Use Callbacks to indicate input signal\r

164

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

165

*/\r

166

#ifndef IRMP_USE_CALLBACK\r

167

# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r

168

#endif\r

169

\r

170

#endif /* _WC_IRMPCONFIG_H_ */\r