cloudbase.mooo.com Git - irmp.git/blame_incremental

Commit	Line	Data
	1	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	2	* irmpconfig.h\r
	3	*\r
	4	* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
	5	*\r
	6	* $Id: irmpconfig.h,v 1.47 2011/01/18 13:02:15 fm Exp $\r
	7	*\r
	8	* ATMEGA88 @ 8 MHz\r
	9	*\r
	10	* This program is free software; you can redistribute it and/or modify\r
	11	* it under the terms of the GNU General Public License as published by\r
	12	* the Free Software Foundation; either version 2 of the License, or\r
	13	* (at your option) any later version.\r
	14	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	15	*/\r
	16	\r
	17	#ifndef _IRMPCONFIG_H_\r
	18	#define _IRMPCONFIG_H_\r
	19	\r
	20	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	21	* Change F_INTERRUPTS if you change the number of interrupts per second,\r
	22	* Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r
	23	* A value above 15000 costs additional program space, absolut maximum value is 20000.\r
	24	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	25	*/\r
	26	#ifndef F_INTERRUPTS\r
	27	#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 20000\r
	28	#endif\r
	29	\r
	30	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	31	* Change settings from 1 to 0 if you want to disable one or more decoders.\r
	32	* This saves program space.\r
	33	*\r
	34	* 1 enable decoder\r
	35	* 0 disable decoder\r
	36	*\r
	37	* The standard decoders are enabled per default.\r
	38	* Some less common protocols are disabled here, you need to enable them manually.\r
	39	*\r
	40	* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
	41	* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
	42	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	43	*/\r
	44	\r
	45	// Protocol Enable Remarks F_INTERRUPTS Program Space\r
	46	#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes\r
	47	#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes\r
	48	#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes\r
	49	#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r
	50	#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
	51	#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r
	52	#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~250 bytes\r
	53	#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes\r
	54	#define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~200 bytes\r
	55	#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~150 bytes\r
	56	#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~150 bytes\r
	57	#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
	58	#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
	59	#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~250 bytes\r
	60	#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)\r
	61	#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
	62	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes\r
	63	#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes\r
	64	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes\r
	65	\r
	66	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	67	* Change hardware pin here:\r
	68	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	69	*/\r
	70	#ifdef PIC_CCS_COMPILER // PIC CCS Compiler:\r
	71	\r
	72	#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
	73	\r
	74	#else // AVR:\r
	75	\r
	76	#define IRMP_PORT PORTB\r
	77	#define IRMP_DDR DDRB\r
	78	#define IRMP_PIN PINB\r
	79	#define IRMP_BIT 6 // use PB6 as IR input on AVR\r
	80	\r
	81	#define input(x) ((x) & (1 << IRMP_BIT))\r
	82	#endif\r
	83	\r
	84	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	85	* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
	86	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	87	*/\r
	88	#ifndef IRMP_LOGGING\r
	89	#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
	90	#endif\r
	91	\r
	92	#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
	93	#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
	94	#undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
	95	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
	96	#endif\r
	97	\r
	98	#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
	99	#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)\r
	100	#undef IRMP_SUPPORT_RECS80_PROTOCOL\r
	101	#define IRMP_SUPPORT_RECS80_PROTOCOL 0\r
	102	#endif\r
	103	\r
	104	#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
	105	#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)\r
	106	#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
	107	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r
	108	#endif\r
	109	\r
	110	#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
	111	#warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
	112	#undef IRMP_SUPPORT_NEC_PROTOCOL\r
	113	#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
	114	#endif\r
	115	\r
	116	#endif /* _WC_IRMPCONFIG_H_ */\r

1

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

* irmpconfig.h\r

*\r

*\r

* $Id: irmpconfig.h,v 1.47 2011/01/18 13:02:15 fm Exp $\r

*\r

* ATMEGA88 @ 8 MHz\r

*\r

* This program is free software; you can redistribute it and/or modify\r

11

* it under the terms of the GNU General Public License as published by\r

12

* the Free Software Foundation; either version 2 of the License, or\r

13

* (at your option) any later version.\r

14

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

15

*/\r

16

\r

17

#ifndef _IRMPCONFIG_H_\r

18

#define _IRMPCONFIG_H_\r

19

\r

20

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

21

* Change F_INTERRUPTS if you change the number of interrupts per second,\r

22

* Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r

23

* A value above 15000 costs additional program space, absolut maximum value is 20000.\r

24

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

25

*/\r

26

#ifndef F_INTERRUPTS\r

27

#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 20000\r

28

#endif\r

29

\r

30

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

31

* Change settings from 1 to 0 if you want to disable one or more decoders.\r

32

* This saves program space.\r

33

*\r

34

* 1 enable decoder\r

35

* 0 disable decoder\r

36

*\r

37

* The standard decoders are enabled per default.\r

38

* Some less common protocols are disabled here, you need to enable them manually.\r

39

*\r

40

* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r

41

* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r

42

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

43

*/\r

44

\r

45

// Protocol Enable Remarks F_INTERRUPTS Program Space\r

46

#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes\r

47

#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes\r

48

#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes\r

49

#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r

50

#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r

51

#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r

52

#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~250 bytes\r

53

#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes\r

54

#define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~200 bytes\r

55

#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~150 bytes\r

56

#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~150 bytes\r

57

#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r

58

#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r

59

#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~250 bytes\r

60

#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)\r

61

#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r

62

#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes\r

63

#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes\r

64

#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes\r

65

\r

66

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

67

* Change hardware pin here:\r

68

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

69

*/\r

70

#ifdef PIC_CCS_COMPILER // PIC CCS Compiler:\r

71

\r

72

#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r

\r

#else // AVR:\r

\r

#define IRMP_PORT PORTB\r

77

#define IRMP_DDR DDRB\r

78

#define IRMP_PIN PINB\r

79

#define IRMP_BIT 6 // use PB6 as IR input on AVR\r

80

\r

81

#define input(x) ((x) & (1 << IRMP_BIT))\r

82

#endif\r

83

\r

84

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r

85

* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r

86

*---------------------------------------------------------------------------------------------------------------------------------------------------\r

87

*/\r

88

#ifndef IRMP_LOGGING\r

89

#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r

90

#endif\r

91

\r

92

#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r