]>
Commit | Line | Data |
---|---|---|
1 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
2 | * irsndconfig.h\r | |
3 | *\r | |
4 | * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H!\r | |
5 | *\r | |
6 | * Copyright (c) 2010-2016 Frank Meyer - frank(at)fli4l.de\r | |
7 | *\r | |
8 | * $Id: irsndconfig.h,v 1.89 2016/12/19 09:01:41 fm Exp $\r | |
9 | *\r | |
10 | * This program is free software; you can redistribute it and/or modify\r | |
11 | * it under the terms of the GNU General Public License as published by\r | |
12 | * the Free Software Foundation; either version 2 of the License, or\r | |
13 | * (at your option) any later version.\r | |
14 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
15 | */\r | |
16 | \r | |
17 | #ifndef _IRSNDCONFIG_H_\r | |
18 | #define _IRSNDCONFIG_H_\r | |
19 | \r | |
20 | #if !defined(_IRSND_H_)\r | |
21 | # error please include only irsnd.h, not irsndconfig.h\r | |
22 | #endif\r | |
23 | \r | |
24 | // #define IRSND_DEBUG 1 // activate debugging\r | |
25 | \r | |
26 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
27 | * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000\r | |
28 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
29 | */\r | |
30 | #ifndef F_INTERRUPTS\r | |
31 | # define F_INTERRUPTS 15000 // interrupts per second\r | |
32 | #endif\r | |
33 | \r | |
34 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
35 | * Change settings from 1 to 0 if you want to disable one or more encoders.\r | |
36 | * This saves program space.\r | |
37 | * 1 enable decoder\r | |
38 | * 0 disable decoder\r | |
39 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
40 | */\r | |
41 | \r | |
42 | // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r | |
43 | #define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~200 bytes\r | |
44 | #define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~100 bytes\r | |
45 | #define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r | |
46 | #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes\r | |
47 | #define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes\r | |
48 | \r | |
49 | // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r | |
50 | #define IRSND_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~200 bytes\r | |
51 | #define IRSND_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~150 bytes\r | |
52 | #define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~250 bytes\r | |
53 | #define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 ~250 bytes\r | |
54 | #define IRSND_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r | |
55 | #define IRSND_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~150 bytes\r | |
56 | #define IRSND_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes\r | |
57 | #define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~250 bytes\r | |
58 | #define IRSND_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r | |
59 | #define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 ~150 bytes\r | |
60 | #define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~400 bytes\r | |
61 | \r | |
62 | // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r | |
63 | #define IRSND_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~100 bytes\r | |
64 | #define IRSND_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r | |
65 | #define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~100 bytes\r | |
66 | #define IRSND_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~100 bytes\r | |
67 | #define IRSND_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER >= 10000 ~100 bytes\r | |
68 | #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 ~250 bytes\r | |
69 | #define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 15000 ~100 bytes\r | |
70 | #define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 15000 ~100 bytes\r | |
71 | #define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r | |
72 | #define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes\r | |
73 | #define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r | |
74 | #define IRSND_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r | |
75 | #define IRSND_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r | |
76 | #define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes\r | |
77 | #define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes\r | |
78 | #define IRSND_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r | |
79 | #define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~250 bytes\r | |
80 | #define IRSND_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~200 bytes\r | |
81 | #define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r | |
82 | #define IRSND_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 DON'T CHANGE, NOT SUPPORTED YET!\r | |
83 | #define IRSND_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~150 bytes.\r | |
84 | #define IRSND_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes\r | |
85 | #define IRSND_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes\r | |
86 | #define IRSND_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~150 bytes\r | |
87 | #define IRSND_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~150 bytes\r | |
88 | #define IRSND_SUPPORT_TECHNICS_PROTOCOL 0 // TECHNICS >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r | |
89 | #define IRSND_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~150 bytes\r | |
90 | #define IRSND_SUPPORT_MITSU_HEAVY_PROTOCOL 0 // Mitsubishi-Heavy Aircondition, similar Timing to Panasonic beamer\r | |
91 | \r | |
92 | \r | |
93 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
94 | * AVR XMega section:\r | |
95 | *\r | |
96 | * Change hardware pin here: IRSND_XMEGA_OC0A = OC0A on ATxmegas supporting OC0A, e.g. ATxmega128A1U\r | |
97 | * IRSND_XMEGA_OC0B = OC0B on ATxmegas supporting OC0B, e.g. ATxmega128A1U\r | |
98 | * IRSND_XMEGA_OC0C = OC0C on ATxmegas supporting OC0C, e.g. ATxmega128A1U\r | |
99 | * IRSND_XMEGA_OC0D = OC0D on ATxmegas supporting OC0D, e.g. ATxmega128A1U\r | |
100 | * IRSND_XMEGA_OC1A = OC1A on ATxmegas supporting OC1A, e.g. ATxmega128A1U\r | |
101 | * IRSND_XMEGA_OC1B = OC1B on ATxmegas supporting OC1B, e.g. ATxmega128A1U\r | |
102 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
103 | */\r | |
104 | #if defined(__AVR_XMEGA__) // XMEGA\r | |
105 | # define IRSND_PORT_PRE PORTD\r | |
106 | # define XMEGA_Timer TCD0\r | |
107 | # define IRSND_OCx IRSND_XMEGA_OC0B // use OC0B\r | |
108 | \r | |
109 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
110 | * AVR ATMega/ATTiny section:\r | |
111 | *\r | |
112 | * Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8\r | |
113 | * IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88\r | |
114 | * IRSND_OC2B = OC2B on ATmegas supporting OC2B, e.g. ATmega88\r | |
115 | * IRSND_OC0 = OC0 on ATmegas supporting OC0, e.g. ATmega162\r | |
116 | * IRSND_OC0A = OC0A on ATmegas/ATtinys supporting OC0A, e.g. ATtiny84, ATtiny85, ATtiny87/167\r | |
117 | * IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85\r | |
118 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
119 | */\r | |
120 | #elif defined(ATMEL_AVR)\r | |
121 | # define IRSND_OCx IRSND_OC2B // use OC2B\r | |
122 | \r | |
123 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
124 | * PIC C18 or XC8 section:\r | |
125 | *\r | |
126 | * Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ...\r | |
127 | * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...\r | |
128 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
129 | */\r | |
130 | #elif defined(PIC_C18) // C18 or XC8 compiler\r | |
131 | # if defined(__12F1840) // XC8 compiler\r | |
132 | # define Pre_Scaler 1 // define prescaler for timer2 e.g. 1,4,16\r | |
133 | # define F_CPU 32000000UL // PIC frequency: set your freq here\r | |
134 | # define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value\r | |
135 | \r | |
136 | # else // C18 compiler\r | |
137 | # define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC\r | |
138 | // change other PIC C18 specific settings:\r | |
139 | # define F_CPU 48000000UL // PIC frequency: set your freq here\r | |
140 | # define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16\r | |
141 | # define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value\r | |
142 | # endif\r | |
143 | \r | |
144 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
145 | * ARM STM32 section:\r | |
146 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
147 | */\r | |
148 | #elif defined (ARM_STM32) // use B6 as IR output on STM32\r | |
149 | # define IRSND_PORT_LETTER B\r | |
150 | # define IRSND_BIT_NUMBER 6\r | |
151 | # define IRSND_TIMER_NUMBER 4\r | |
152 | # define IRSND_TIMER_CHANNEL_NUMBER 1 // only channel 1 can be used at the moment, others won't work\r | |
153 | \r | |
154 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
155 | * ARM STM32 with libopencm3 section:\r | |
156 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
157 | */\r | |
158 | #elif defined (LIBOPENCM3) // use B6 as IR output on STM32 whith libopencm3\r | |
159 | # define IRSND_PORT_LETTER B\r | |
160 | # define IRSND_BIT_NUMBER 9\r | |
161 | # define IRSND_TIMER_NUMBER 4\r | |
162 | # define IRSND_TIMER_CHANNEL_NUMBER 4\r | |
163 | # define F_CPU // KLUDGE: make irsnd.c happy (TODO:)\r | |
164 | \r | |
165 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
166 | * Teensy 3.x with teensyduino gcc compiler\r | |
167 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
168 | */\r | |
169 | #elif defined (TEENSY_ARM_CORTEX_M4)\r | |
170 | # define IRSND_PIN 5 // choose an arduino pin with PWM function!\r | |
171 | \r | |
172 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
173 | * ESP8266 (Arduino, see IRSEND.ino)\r | |
174 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
175 | */\r | |
176 | #elif defined (__xtensa__)\r | |
177 | # define IRSND_PIN 0 // choose an arduino pin with PWM function!\r | |
178 | \r | |
179 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
180 | * Other target systems\r | |
181 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
182 | */\r | |
183 | #elif !defined (UNIX_OR_WINDOWS)\r | |
184 | # error target system not defined.\r | |
185 | #endif\r | |
186 | \r | |
187 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
188 | * Use Callbacks to indicate output signal or something else\r | |
189 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
190 | */\r | |
191 | #ifndef IRSND_USE_CALLBACK\r | |
192 | # define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0\r | |
193 | #endif\r | |
194 | \r | |
195 | #endif // _IRSNDCONFIG_H_\r |