*\r
* Copyright (c) 2013-2015 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmpprotocols.h,v 1.30 2015/01/26 13:07:01 fm Exp $\r
+ * $Id: irmpprotocols.h,v 1.38 2015/09/20 10:51:37 fm Exp $\r
*\r
* This program is free software; you can redistribute it and/or modify\r
* it under the terms of the GNU General Public License as published by\r
#define IRMP_LGAIR_PROTOCOL 40 // LG air conditioner\r
#define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits)\r
#define IRMP_MERLIN_PROTOCOL 42 // Merlin (Pollin 620 185)\r
+#define IRMP_PENTAX_PROTOCOL 43 // Pentax camera\r
+#define IRMP_FAN_PROTOCOL 44 // FAN (ventilator), very similar to NUBERT, but last bit is data bit instead of stop bit\r
+#define IRMP_S100_PROTOCOL 45 // very similar to RC5, but 14 instead of 13 data bits\r
+#define IRMP_ACP24_PROTOCOL 46 // Stiebel Eltron ACP24 air conditioner\r
+#define IRMP_TECHNICS_PROTOCOL 47 // Technics, similar to Matsushita, but 22 instead of 24 bits\r
+#define IRMP_RADIO1_PROTOCOL 48 // Radio protocol (experimental status), do not use it yet!\r
\r
-#define IRMP_RADIO1_PROTOCOL 43 // Radio protocol (experimental status), do not use it yet!\r
-\r
-#define IRMP_N_PROTOCOLS 43 // number of supported protocols\r
+#define IRMP_N_PROTOCOLS 48 // number of supported protocols\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* timing constants:\r
#define MATSUSHITA_LSB 1 // LSB...MSB?\r
#define MATSUSHITA_FLAGS 0 // flags\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * TECHNICS: same timings as MATSUSHITA\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define TECHNICS_ADDRESS_LEN 0 // read 0 address bits\r
+#define TECHNICS_COMMAND_LEN 11 // read 11 bits\r
+#define TECHNICS_COMPLETE_DATA_LEN 22 // complete length\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* KASEIKYO:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
-#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define RC5_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms\r
\r
#define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)\r
#define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits\r
#define RC5_LSB 0 // MSB...LSB\r
#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * S100: very similar to RC5, but 14 insted of 13 bits\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define S100_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
+#define S100_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms\r
+\r
+#define S100_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)\r
+#define S100_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits\r
+#define S100_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
+#define S100_COMMAND_LEN 7 // read 7 command bits\r
+#define S100_COMPLETE_DATA_LEN 14 // complete length\r
+#define S100_STOP_BIT 0 // has no stop bit\r
+#define S100_LSB 0 // MSB...LSB\r
+#define S100_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* DENON:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
#define NUBERT_LSB 0 // MSB?\r
#define NUBERT_FLAGS 0 // flags\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * FAN: (ventilator)\r
+ *\r
+ * Similar to NUBERT, but\r
+ * - has data bit instead of stop bit\r
+ * - has NO frame repetition\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define FAN_START_BIT_PULSE_TIME 1280.0e-6 // 1280 usec pulse\r
+#define FAN_START_BIT_PAUSE_TIME 380.0e-6 // 380 usec pause\r
+#define FAN_1_PULSE_TIME 1280.0e-6 // 1280 usec pulse\r
+#define FAN_1_PAUSE_TIME 380.0e-6 // 380 usec pause\r
+#define FAN_0_PULSE_TIME 380.0e-6 // 380 usec pulse\r
+#define FAN_0_PAUSE_TIME 1280.0e-6 // 1280 usec pause\r
+#define FAN_FRAMES 1 // FAN sends only 1 frame (NUBERT sends 2)\r
+#define FAN_AUTO_REPETITION_PAUSE_TIME 6.6e-3 // auto repetition after 6.6ms\r
+#define FAN_FRAME_REPEAT_PAUSE_TIME 6.6e-3 // frame repeat after 6.6ms\r
+#define FAN_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define FAN_ADDRESS_LEN 0 // read 0 address bits\r
+#define FAN_COMMAND_OFFSET 0 // skip 0 bits\r
+#define FAN_COMMAND_LEN 11 // read 10 bits\r
+#define FAN_COMPLETE_DATA_LEN 11 // complete length\r
+#define FAN_STOP_BIT 0 // has NO stop bit\r
+#define FAN_LSB 0 // MSB\r
+#define FAN_FLAGS 0 // flags\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* SPEAKER:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 1340 usec pulse\r
-#define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 340 usec pause\r
-#define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1340 usec pulse\r
-#define SPEAKER_1_PAUSE_TIME 440.0e-6 // 340 usec pause\r
-#define SPEAKER_0_PULSE_TIME 440.0e-6 // 500 usec pulse\r
-#define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1300 usec pause\r
-#define SPEAKER_FRAMES 2 // Nubert sends 2 frames\r
+#define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 440 usec pulse\r
+#define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 1250 usec pause\r
+#define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1250 usec pulse\r
+#define SPEAKER_1_PAUSE_TIME 440.0e-6 // 440 usec pause\r
+#define SPEAKER_0_PULSE_TIME 440.0e-6 // 440 usec pulse\r
+#define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1250 usec pause\r
+#define SPEAKER_FRAMES 2 // SPEAKER sends 2 frames\r
#define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
#define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms\r
#define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits\r
* See notes for A1TVBOX\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 300 usec pulse\r
-#define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 340 usec pause\r
-#define MERLIN_BIT_PULSE_TIME 210.0e-6 // 250 usec pulse\r
-#define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 150 usec pulse\r
+#define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse\r
+#define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 429 usec pause\r
+#define MERLIN_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse\r
+#define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 210 usec pulse\r
#define MERLIN_STOP_BIT 0 // has no stop bit\r
#define MERLIN_LSB 0 // MSB...LSB\r
#define MERLIN_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags\r
\r
#define RCMM32_FRAME_REPEAT_PAUSE_TIME 80.0e-3 // frame repeat after 80 ms\r
#define RCMM32_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define RCMM32_ADDRESS_LEN 16 // read 16 address bits\r
+#define RCMM32_ADDRESS_LEN 16 // read 16 address bits\r
#define RCMM32_COMMAND_OFFSET 17 // skip 17 bits\r
#define RCMM32_COMMAND_LEN 15 // read 15 bits\r
#define RCMM32_COMPLETE_DATA_LEN 32 // complete length\r
#define RCMM32_LSB 0 // LSB...MSB\r
#define RCMM32_FLAGS 0 // flags\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * PENTAX:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define PENTAX_START_BIT_PULSE_TIME 13000.0e-6 // 13 msec pulse\r
+#define PENTAX_START_BIT_PAUSE_TIME 3000.0e-6 // 3 msec pause\r
+#define PENTAX_PULSE_TIME 1000.0e-6 // 1 msec pulse\r
+#define PENTAX_1_PAUSE_TIME 3000.0e-6 // 3 msec pause\r
+#define PENTAX_0_PAUSE_TIME 1000.0e-6 // 1 msec pause\r
+#define PENTAX_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms\r
+#define PENTAX_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define PENTAX_ADDRESS_LEN 0 // read 0 address bits\r
+#define PENTAX_COMMAND_OFFSET 0 // skip 0 bits\r
+#define PENTAX_COMMAND_LEN 6 // read 6 bits\r
+#define PENTAX_COMPLETE_DATA_LEN 6 // complete length\r
+#define PENTAX_STOP_BIT 1 // has stop bit\r
+#define PENTAX_LSB 0 // LSB...MSB\r
+#define PENTAX_FLAGS 0 // flags\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * ACP24: Stiebel Eltron ACP24 air conditioner\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define ACP24_START_BIT_PULSE_TIME 390.0e-6 // 390 usec pulse\r
+#define ACP24_START_BIT_PAUSE_TIME 950.0e-6 // 950 usec pause\r
+#define ACP24_PULSE_TIME 390.0e-6 // 390 usec pulse\r
+#define ACP24_1_PAUSE_TIME 1300.0e-6 // 1300 usec pause\r
+#define ACP24_0_PAUSE_TIME 950.0e-6 // 950 usec pause\r
+#define ACP24_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms?\r
+#define ACP24_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define ACP24_ADDRESS_LEN 0 // read 6 address bits\r
+#define ACP24_COMMAND_OFFSET 0 // skip 6 bits\r
+#define ACP24_COMMAND_LEN 0 // read 0 bits (70 bits will be read and compressed by special routine)\r
+#define ACP24_COMPLETE_DATA_LEN 70 // complete length\r
+#define ACP24_STOP_BIT 1 // has stop bit\r
+#define ACP24_LSB 0 // LSB...MSB\r
+#define ACP24_FLAGS 0 // flags\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* RADIO1 - e.g. Tevion\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse\r
-#define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse\r
-#define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse\r
-#define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause\r
-#define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse\r
-#define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause\r
-\r
-#define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
-#define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits\r
-#define RADIO1_ADDRESS_LEN 16 // read 16 address bits\r
-#define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits\r
-#define RADIO1_COMMAND_LEN 3 // read 3 command bits\r
-#define RADIO1_COMPLETE_DATA_LEN 23 // complete length\r
-#define RADIO1_STOP_BIT 1 // has stop bit\r
-#define RADIO1_LSB 1 // LSB...MSB?\r
-#define RADIO1_FLAGS 0 // flags\r
+#define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse\r
+#define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse\r
+#define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse\r
+#define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause\r
+#define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse\r
+#define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause\r
+\r
+#define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
+#define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits\r
+#define RADIO1_ADDRESS_LEN 16 // read 16 address bits\r
+#define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits\r
+#define RADIO1_COMMAND_LEN 3 // read 3 command bits\r
+#define RADIO1_COMPLETE_DATA_LEN 23 // complete length\r
+#define RADIO1_STOP_BIT 1 // has stop bit\r
+#define RADIO1_LSB 1 // LSB...MSB?\r
+#define RADIO1_FLAGS 0 // flags\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Frame Repetitions:\r