* Copyright (c) 2009-2015 Frank Meyer - frank(at)fli4l.de\r
* Extensions for PIC 12F1820 W.Strobl 2014-07-20\r
*\r
- * $Id: irmpconfig.h,v 1.124 2015/01/26 13:07:01 fm Exp $\r
+ * $Id: irmpconfig.h,v 1.133 2015/06/15 10:30:10 fm Exp $\r
*\r
* This program is free software; you can redistribute it and/or modify\r
* it under the terms of the GNU General Public License as published by\r
#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes\r
#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r
#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes\r
#define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r
#define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes\r
#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)\r
#define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes\r
+#define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_ACP24_PROTOCOL 1 // ACP24 >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change hardware pin here for ATMEL AVR\r
+ * Change hardware pin here for ATMEL ATMega/ATTiny/XMega\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#if defined (ATMEL_AVR) // use PB6 as IR input on AVR\r
+#if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR\r
# define IRMP_PORT_LETTER B\r
# define IRMP_BIT_NUMBER 6\r
\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)\r
-#if defined(__12F1840)\r
-# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler\r
-#endif\r
-# define IRMP_PIN PORTBbits.RB4 // PIC C18\r
+# if defined(__12F1840)\r
+# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler\r
+# else\r
+# define IRMP_PIN PORTBbits.RB4 // PIC C18\r
+# endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change hardware pin here for PIC CCS compiler\r
# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r
#endif\r
\r
-#endif /* _WC_IRMPCONFIG_H_ */\r
+#endif // _IRMPCONFIG_H_\r