]> cloudbase.mooo.com Git - irmp.git/blobdiff - irmp.c
Version 2.6.4: changed timing tolerance of KASEIKYO
[irmp.git] / irmp.c
diff --git a/irmp.c b/irmp.c
index ef42937f748fcf3517b92ebbc95b5995e1544679..018bb7fad36c2ad2af2738b0203102f67acdae8b 100644 (file)
--- a/irmp.c
+++ b/irmp.c
@@ -1,19 +1,18 @@
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
  * irmp.c - infrared multi-protocol decoder, supports several remote control protocols\r
  *\r
- * Copyright (c) 2009-2012 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2009-2014 Frank Meyer - frank(at)fli4l.de\r
  *\r
- * $Id: irmp.c,v 1.121 2012/05/22 15:08:46 fm Exp $\r
+ * $Id: irmp.c,v 1.164 2014/09/15 12:36:28 fm Exp $\r
  *\r
- * ATMEGA88 @ 8 MHz\r
- *\r
- * Supported mikrocontrollers:\r
+ * Supported AVR mikrocontrollers:\r
  *\r
+ * ATtiny87,  ATtiny167\r
  * ATtiny45,  ATtiny85\r
- * ATtiny84\r
+ * ATtiny44,  ATtiny84\r
  * ATmega8,   ATmega16,  ATmega32\r
  * ATmega162\r
- * ATmega164, ATmega324, ATmega644,  ATmega644P, ATmega1284\r
+ * ATmega164, ATmega324, ATmega644,  ATmega644P, ATmega1284, ATmega1284P\r
  * ATmega88,  ATmega88P, ATmega168,  ATmega168P, ATmega328P\r
  *\r
  * This program is free software; you can redistribute it and/or modify\r
@@ -41,7 +40,9 @@
     IRMP_SUPPORT_RC6_PROTOCOL == 1 ||                   \\r
     IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1 ||    \\r
     IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1 ||     \\r
-    IRMP_SUPPORT_IR60_PROTOCOL\r
+    IRMP_SUPPORT_IR60_PROTOCOL == 1 ||                  \\r
+    IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1 ||               \\r
+    IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
 #  define IRMP_SUPPORT_MANCHESTER                   1\r
 #else\r
 #  define IRMP_SUPPORT_MANCHESTER                   0\r
 #define MATSUSHITA_0_PAUSE_LEN_MIN              ((uint8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)\r
 #define MATSUSHITA_0_PAUSE_LEN_MAX              ((uint8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)\r
 \r
-#define KASEIKYO_START_BIT_PULSE_LEN_MIN        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
-#define KASEIKYO_START_BIT_PULSE_LEN_MAX        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
-#define KASEIKYO_START_BIT_PAUSE_LEN_MIN        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
-#define KASEIKYO_START_BIT_PAUSE_LEN_MAX        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define KASEIKYO_START_BIT_PULSE_LEN_MIN        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define KASEIKYO_START_BIT_PULSE_LEN_MAX        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define KASEIKYO_START_BIT_PAUSE_LEN_MIN        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define KASEIKYO_START_BIT_PAUSE_LEN_MAX        ((uint8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
 #define KASEIKYO_PULSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MIN_TOLERANCE_50 + 0.5) - 1)\r
 #define KASEIKYO_PULSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MAX_TOLERANCE_50 + 0.5) + 1)\r
 #define KASEIKYO_1_PAUSE_LEN_MIN                ((uint8_t)(F_INTERRUPTS * KASEIKYO_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
 #define KASEIKYO_0_PAUSE_LEN_MIN                ((uint8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MIN_TOLERANCE_50 + 0.5) - 1)\r
 #define KASEIKYO_0_PAUSE_LEN_MAX                ((uint8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MAX_TOLERANCE_50 + 0.5) + 1)\r
 \r
-#define RECS80_START_BIT_PULSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MIN_TOLERANCE_00 + 0.5) - 1)\r
-#define RECS80_START_BIT_PULSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define RECS80_START_BIT_PULSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RECS80_START_BIT_PULSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
 #define RECS80_START_BIT_PAUSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define RECS80_START_BIT_PAUSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
-#define RECS80_PULSE_LEN_MIN                    ((uint8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
-#define RECS80_PULSE_LEN_MAX                    ((uint8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define RECS80_PULSE_LEN_MIN                    ((uint8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RECS80_PULSE_LEN_MAX                    ((uint8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
 #define RECS80_1_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define RECS80_1_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
 #define RECS80_0_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define RECS80_0_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
 \r
+\r
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1 // BOSE conflicts with RC5, so keep tolerance for RC5 minimal here:\r
+#define RC5_START_BIT_LEN_MIN                   ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RC5_START_BIT_LEN_MAX                   ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+#else\r
 #define RC5_START_BIT_LEN_MIN                   ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define RC5_START_BIT_LEN_MAX                   ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#endif\r
 \r
 #define RC5_BIT_LEN_MIN                         ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define RC5_BIT_LEN_MAX                         ((uint8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
 #define RC6_BIT_PAUSE_LEN_MIN                   ((uint8_t)(F_INTERRUPTS * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define RC6_BIT_PAUSE_LEN_MAX                   ((uint8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_20 + 0.5) + 1)       // pauses: 300 - 600\r
 \r
-#define RECS80EXT_START_BIT_PULSE_LEN_MIN       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MIN_TOLERANCE_00 + 0.5) - 1)\r
-#define RECS80EXT_START_BIT_PULSE_LEN_MAX       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MAX_TOLERANCE_00 + 0.5) + 1)\r
-#define RECS80EXT_START_BIT_PAUSE_LEN_MIN       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
-#define RECS80EXT_START_BIT_PAUSE_LEN_MAX       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
-#define RECS80EXT_PULSE_LEN_MIN                 ((uint8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
-#define RECS80EXT_PULSE_LEN_MAX                 ((uint8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define RECS80EXT_START_BIT_PULSE_LEN_MIN       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RECS80EXT_START_BIT_PULSE_LEN_MAX       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define RECS80EXT_START_BIT_PAUSE_LEN_MIN       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define RECS80EXT_START_BIT_PAUSE_LEN_MAX       ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define RECS80EXT_PULSE_LEN_MIN                 ((uint8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RECS80EXT_PULSE_LEN_MAX                 ((uint8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
 #define RECS80EXT_1_PAUSE_LEN_MIN               ((uint8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define RECS80EXT_1_PAUSE_LEN_MAX               ((uint8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
 #define RECS80EXT_0_PAUSE_LEN_MIN               ((uint8_t)(F_INTERRUPTS * RECS80EXT_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define NUBERT_0_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
 #define NUBERT_0_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
 \r
+#define SPEAKER_START_BIT_PULSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define SPEAKER_START_BIT_PULSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define SPEAKER_START_BIT_PAUSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define SPEAKER_START_BIT_PAUSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define SPEAKER_1_PULSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * SPEAKER_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define SPEAKER_1_PULSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * SPEAKER_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define SPEAKER_1_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * SPEAKER_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define SPEAKER_1_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * SPEAKER_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define SPEAKER_0_PULSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * SPEAKER_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define SPEAKER_0_PULSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * SPEAKER_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define SPEAKER_0_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * SPEAKER_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define SPEAKER_0_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * SPEAKER_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+\r
 #define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN   ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX   ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
 #define BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN   ((uint8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
 #define LEGO_0_PAUSE_LEN_MIN                    ((uint8_t)(F_INTERRUPTS * LEGO_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)\r
 #define LEGO_0_PAUSE_LEN_MAX                    ((uint8_t)(F_INTERRUPTS * LEGO_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)\r
 \r
+#define BOSE_START_BIT_PULSE_LEN_MIN             ((uint8_t)(F_INTERRUPTS * BOSE_START_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define BOSE_START_BIT_PULSE_LEN_MAX             ((uint8_t)(F_INTERRUPTS * BOSE_START_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define BOSE_START_BIT_PAUSE_LEN_MIN             ((uint8_t)(F_INTERRUPTS * BOSE_START_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define BOSE_START_BIT_PAUSE_LEN_MAX             ((uint8_t)(F_INTERRUPTS * BOSE_START_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define BOSE_PULSE_LEN_MIN                       ((uint8_t)(F_INTERRUPTS * BOSE_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define BOSE_PULSE_LEN_MAX                       ((uint8_t)(F_INTERRUPTS * BOSE_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define BOSE_1_PAUSE_LEN_MIN                     ((uint8_t)(F_INTERRUPTS * BOSE_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define BOSE_1_PAUSE_LEN_MAX                     ((uint8_t)(F_INTERRUPTS * BOSE_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define BOSE_0_PAUSE_LEN_MIN                     ((uint8_t)(F_INTERRUPTS * BOSE_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define BOSE_0_PAUSE_LEN_MAX                     ((uint8_t)(F_INTERRUPTS * BOSE_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define BOSE_FRAME_REPEAT_PAUSE_LEN_MAX          (uint16_t)(F_INTERRUPTS * 100.0e-3 * MAX_TOLERANCE_20 + 0.5)\r
+\r
+#define A1TVBOX_START_BIT_PULSE_LEN_MIN         ((uint8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define A1TVBOX_START_BIT_PULSE_LEN_MAX         ((uint8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define A1TVBOX_START_BIT_PAUSE_LEN_MIN         ((uint8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define A1TVBOX_START_BIT_PAUSE_LEN_MAX         ((uint8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define A1TVBOX_BIT_PULSE_LEN_MIN               ((uint8_t)(F_INTERRUPTS * A1TVBOX_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define A1TVBOX_BIT_PULSE_LEN_MAX               ((uint8_t)(F_INTERRUPTS * A1TVBOX_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define A1TVBOX_BIT_PAUSE_LEN_MIN               ((uint8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define A1TVBOX_BIT_PAUSE_LEN_MAX               ((uint8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+\r
+#define ORTEK_START_BIT_PULSE_LEN_MIN           ((uint8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define ORTEK_START_BIT_PULSE_LEN_MAX           ((uint8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define ORTEK_START_BIT_PAUSE_LEN_MIN           ((uint8_t)(F_INTERRUPTS * ORTEK_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define ORTEK_START_BIT_PAUSE_LEN_MAX           ((uint8_t)(F_INTERRUPTS * ORTEK_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define ORTEK_BIT_PULSE_LEN_MIN                 ((uint8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define ORTEK_BIT_PULSE_LEN_MAX                 ((uint8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define ORTEK_BIT_PAUSE_LEN_MIN                 ((uint8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define ORTEK_BIT_PAUSE_LEN_MAX                 ((uint8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+\r
+#define TELEFUNKEN_START_BIT_PULSE_LEN_MIN      ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define TELEFUNKEN_START_BIT_PULSE_LEN_MAX      ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define TELEFUNKEN_START_BIT_PAUSE_LEN_MIN      ((uint8_t)(F_INTERRUPTS * (TELEFUNKEN_START_BIT_PAUSE_TIME) * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define TELEFUNKEN_START_BIT_PAUSE_LEN_MAX      ((uint8_t)(F_INTERRUPTS * (TELEFUNKEN_START_BIT_PAUSE_TIME) * MAX_TOLERANCE_10 + 0.5) - 1)\r
+#define TELEFUNKEN_PULSE_LEN_MIN                ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define TELEFUNKEN_PULSE_LEN_MAX                ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define TELEFUNKEN_1_PAUSE_LEN_MIN              ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define TELEFUNKEN_1_PAUSE_LEN_MAX              ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define TELEFUNKEN_0_PAUSE_LEN_MIN              ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define TELEFUNKEN_0_PAUSE_LEN_MAX              ((uint8_t)(F_INTERRUPTS * TELEFUNKEN_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+// autodetect TELEFUNKEN repetition frame within 50 msec:\r
+// #define TELEFUNKEN_FRAME_REPEAT_PAUSE_LEN_MAX   (uint16_t)(F_INTERRUPTS * TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)\r
+\r
+#define ROOMBA_START_BIT_PULSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define ROOMBA_START_BIT_PULSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define ROOMBA_START_BIT_PAUSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define ROOMBA_START_BIT_PAUSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define ROOMBA_1_PAUSE_LEN_EXACT                ((uint8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME + 0.5))\r
+#define ROOMBA_1_PULSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * ROOMBA_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define ROOMBA_1_PULSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * ROOMBA_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define ROOMBA_1_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define ROOMBA_1_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define ROOMBA_0_PAUSE_LEN                      ((uint8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME))\r
+#define ROOMBA_0_PULSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * ROOMBA_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define ROOMBA_0_PULSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * ROOMBA_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define ROOMBA_0_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define ROOMBA_0_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+\r
+#define RCMM32_START_BIT_PULSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * RCMM32_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RCMM32_START_BIT_PULSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * RCMM32_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+#define RCMM32_START_BIT_PAUSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * RCMM32_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RCMM32_START_BIT_PAUSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * RCMM32_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+#define RCMM32_BIT_PULSE_LEN_MIN                ((uint8_t)(F_INTERRUPTS * RCMM32_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RCMM32_BIT_PULSE_LEN_MAX                ((uint8_t)(F_INTERRUPTS * RCMM32_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+#define RCMM32_BIT_00_PAUSE_LEN_MIN             ((uint8_t)(F_INTERRUPTS * RCMM32_00_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RCMM32_BIT_00_PAUSE_LEN_MAX             ((uint8_t)(F_INTERRUPTS * RCMM32_00_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+#define RCMM32_BIT_01_PAUSE_LEN_MIN             ((uint8_t)(F_INTERRUPTS * RCMM32_01_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RCMM32_BIT_01_PAUSE_LEN_MAX             ((uint8_t)(F_INTERRUPTS * RCMM32_01_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+#define RCMM32_BIT_10_PAUSE_LEN_MIN             ((uint8_t)(F_INTERRUPTS * RCMM32_10_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RCMM32_BIT_10_PAUSE_LEN_MAX             ((uint8_t)(F_INTERRUPTS * RCMM32_10_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+#define RCMM32_BIT_11_PAUSE_LEN_MIN             ((uint8_t)(F_INTERRUPTS * RCMM32_11_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)\r
+#define RCMM32_BIT_11_PAUSE_LEN_MAX             ((uint8_t)(F_INTERRUPTS * RCMM32_11_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)\r
+\r
+#define RADIO1_START_BIT_PULSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * RADIO1_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define RADIO1_START_BIT_PULSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * RADIO1_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define RADIO1_START_BIT_PAUSE_LEN_MIN          ((uint8_t)(F_INTERRUPTS * RADIO1_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define RADIO1_START_BIT_PAUSE_LEN_MAX          ((uint8_t)(F_INTERRUPTS * RADIO1_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define RADIO1_1_PAUSE_LEN_EXACT                ((uint8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME + 0.5))\r
+#define RADIO1_1_PULSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * RADIO1_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RADIO1_1_PULSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * RADIO1_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define RADIO1_1_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RADIO1_1_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define RADIO1_0_PAUSE_LEN                      ((uint8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME))\r
+#define RADIO1_0_PULSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * RADIO1_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RADIO1_0_PULSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * RADIO1_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define RADIO1_0_PAUSE_LEN_MIN                  ((uint8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define RADIO1_0_PAUSE_LEN_MAX                  ((uint8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+\r
 #define AUTO_FRAME_REPETITION_LEN               (uint16_t)(F_INTERRUPTS * AUTO_FRAME_REPETITION_TIME + 0.5)       // use uint16_t!\r
 \r
 #ifdef ANALYZE\r
 #  define ANALYZE_PUTCHAR(a)                    { if (! silent)             { putchar (a);          } }\r
 #  define ANALYZE_ONLY_NORMAL_PUTCHAR(a)        { if (! silent && !verbose) { putchar (a);          } }\r
 #  define ANALYZE_PRINTF(...)                   { if (verbose)              { printf (__VA_ARGS__); } }\r
+#  define ANALYZE_ONLY_NORMAL_PRINTF(...)       { if (! silent && !verbose) { printf (__VA_ARGS__); } }\r
 #  define ANALYZE_NEWLINE()                     { if (verbose)              { putchar ('\n');       } }\r
 static int                                      silent;\r
 static int                                      time_counter;\r
 static int                                      verbose;\r
+\r
+/*******************************                not every PIC compiler knows variadic macros :-(\r
 #else\r
 #  define ANALYZE_PUTCHAR(a)\r
 #  define ANALYZE_ONLY_NORMAL_PUTCHAR(a)\r
 #  define ANALYZE_PRINTF(...)\r
+#  define ANALYZE_ONLY_NORMAL_PRINTF(...)\r
+#  endif\r
 #  define ANALYZE_NEWLINE()\r
+*********************************/\r
 #endif\r
 \r
 #if IRMP_USE_CALLBACK == 1\r
 static void                                     (*irmp_callback_ptr) (uint8_t);\r
 #endif // IRMP_USE_CALLBACK == 1\r
 \r
+#define PARITY_CHECK_OK                         1\r
+#define PARITY_CHECK_FAILED                     0\r
+\r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
  *  Protocol names\r
  *---------------------------------------------------------------------------------------------------------------------------------------------------\r
  */\r
-#if IRMP_PROTOCOL_NAMES == 1\r
-char *\r
-irmp_protocol_names[IRMP_N_PROTOCOLS + 1] =\r
+#if defined(UNIX_OR_WINDOWS) || IRMP_PROTOCOL_NAMES == 1\r
+static const char proto_unknown[]       PROGMEM = "UNKNOWN";\r
+static const char proto_sircs[]         PROGMEM = "SIRCS";\r
+static const char proto_nec[]           PROGMEM = "NEC";\r
+static const char proto_samsung[]       PROGMEM = "SAMSUNG";\r
+static const char proto_matsushita[]    PROGMEM = "MATSUSH";\r
+static const char proto_kaseikyo[]      PROGMEM = "KASEIKYO";\r
+static const char proto_recs80[]        PROGMEM = "RECS80";\r
+static const char proto_rc5[]           PROGMEM = "RC5";\r
+static const char proto_denon[]         PROGMEM = "DENON";\r
+static const char proto_rc6[]           PROGMEM = "RC6";\r
+static const char proto_samsung32[]     PROGMEM = "SAMSG32";\r
+static const char proto_apple[]         PROGMEM = "APPLE";\r
+static const char proto_recs80ext[]     PROGMEM = "RECS80EX";\r
+static const char proto_nubert[]        PROGMEM = "NUBERT";\r
+static const char proto_bang_olufsen[]  PROGMEM = "BANG OLU";\r
+static const char proto_grundig[]       PROGMEM = "GRUNDIG";\r
+static const char proto_nokia[]         PROGMEM = "NOKIA";\r
+static const char proto_siemens[]       PROGMEM = "SIEMENS";\r
+static const char proto_fdc[]           PROGMEM = "FDC";\r
+static const char proto_rccar[]         PROGMEM = "RCCAR";\r
+static const char proto_jvc[]           PROGMEM = "JVC";\r
+static const char proto_rc6a[]          PROGMEM = "RC6A";\r
+static const char proto_nikon[]         PROGMEM = "NIKON";\r
+static const char proto_ruwido[]        PROGMEM = "RUWIDO";\r
+static const char proto_ir60[]          PROGMEM = "IR60";\r
+static const char proto_kathrein[]      PROGMEM = "KATHREIN";\r
+static const char proto_netbox[]        PROGMEM = "NETBOX";\r
+static const char proto_nec16[]         PROGMEM = "NEC16";\r
+static const char proto_nec42[]         PROGMEM = "NEC42";\r
+static const char proto_lego[]          PROGMEM = "LEGO";\r
+static const char proto_thomson[]       PROGMEM = "THOMSON";\r
+static const char proto_bose[]          PROGMEM = "BOSE";\r
+static const char proto_a1tvbox[]       PROGMEM = "A1TVBOX";\r
+static const char proto_ortek[]         PROGMEM = "ORTEK";\r
+static const char proto_telefunken[]    PROGMEM = "TELEFUNKEN";\r
+static const char proto_roomba[]        PROGMEM = "ROOMBA";\r
+static const char proto_rcmm32[]        PROGMEM = "RCMM32";\r
+static const char proto_rcmm24[]        PROGMEM = "RCMM24";\r
+static const char proto_rcmm12[]        PROGMEM = "RCMM12";\r
+static const char proto_speaker[]       PROGMEM = "SPEAKER";\r
+static const char proto_lgair[]         PROGMEM = "LGAIR";\r
+static const char proto_samsung48[]     PROGMEM = "SAMSG48";\r
+\r
+static const char proto_radio1[]        PROGMEM = "RADIO1";\r
+\r
+const char * const\r
+irmp_protocol_names[IRMP_N_PROTOCOLS + 1] PROGMEM =\r
 {\r
-    "UNKNOWN",\r
-    "SIRCS",\r
-    "NEC",\r
-    "SAMSUNG",\r
-    "MATSUSH",\r
-    "KASEIKYO",\r
-    "RECS80",\r
-    "RC5",\r
-    "DENON",\r
-    "RC6",\r
-    "SAMSG32",\r
-    "APPLE",\r
-    "RECS80EX",\r
-    "NUBERT",\r
-    "BANG OLU",\r
-    "GRUNDIG",\r
-    "NOKIA",\r
-    "SIEMENS",\r
-    "FDC",\r
-    "RCCAR",\r
-    "JVC",\r
-    "RC6A",\r
-    "NIKON",\r
-    "RUWIDO",\r
-    "IR60",\r
-    "KATHREIN",\r
-    "NETBOX",\r
-    "NEC16",\r
-    "NEC42",\r
-    "LEGO",\r
-    "THOMSON"\r
+    proto_unknown,\r
+    proto_sircs,\r
+    proto_nec,\r
+    proto_samsung,\r
+    proto_matsushita,\r
+    proto_kaseikyo,\r
+    proto_recs80,\r
+    proto_rc5,\r
+    proto_denon,\r
+    proto_rc6,\r
+    proto_samsung32,\r
+    proto_apple,\r
+    proto_recs80ext,\r
+    proto_nubert,\r
+    proto_bang_olufsen,\r
+    proto_grundig,\r
+    proto_nokia,\r
+    proto_siemens,\r
+    proto_fdc,\r
+    proto_rccar,\r
+    proto_jvc,\r
+    proto_rc6a,\r
+    proto_nikon,\r
+    proto_ruwido,\r
+    proto_ir60,\r
+    proto_kathrein,\r
+    proto_netbox,\r
+    proto_nec16,\r
+    proto_nec42,\r
+    proto_lego,\r
+    proto_thomson,\r
+    proto_bose,\r
+    proto_a1tvbox,\r
+    proto_ortek,\r
+    proto_telefunken,\r
+    proto_roomba,\r
+    proto_rcmm32,\r
+    proto_rcmm24,\r
+    proto_rcmm12,\r
+    proto_speaker,\r
+    proto_lgair,\r
+    proto_samsung48,\r
+\r
+    proto_radio1\r
 };\r
+\r
 #endif\r
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
@@ -422,11 +598,24 @@ irmp_protocol_names[IRMP_N_PROTOCOLS + 1] =
  */\r
 #if IRMP_LOGGING == 1                                               // logging via UART\r
 \r
-#if IRMP_EXT_LOGGING == 1                                           // use external logging\r
-#include "irmpextlog.h"\r
-#else                                                               // normal UART log (IRMP_EXT_LOGGING == 0)\r
-#define BAUD                                    9600L\r
-#include <util/setbaud.h>\r
+#if defined(ARM_STM32F4XX)\r
+#  define  STM32_GPIO_CLOCK   RCC_AHB1Periph_GPIOA                    // per UART2 an PA2\r
+#  define  STM32_UART_CLOCK   RCC_APB1Periph_USART2\r
+#  define  STM32_GPIO_PORT    GPIOA\r
+#  define  STM32_GPIO_PIN     GPIO_Pin_2\r
+#  define  STM32_GPIO_SOURCE  GPIO_PinSource2\r
+#  define  STM32_UART_AF      GPIO_AF_USART2\r
+#  define  STM32_UART_COM     USART2\r
+#  define  STM32_UART_BAUD    115200                                  // mit 115200 Baud\r
+#  include "stm32f4xx_usart.h"\r
+#else\r
+#  if IRMP_EXT_LOGGING == 1                                           // use external logging\r
+#    include "irmpextlog.h"\r
+#  else                                                               // normal UART log (IRMP_EXT_LOGGING == 0)\r
+#    define BAUD                                    9600L\r
+#  ifndef UNIX_OR_WINDOWS\r
+#    include <util/setbaud.h>\r
+#  endif\r
 \r
 #ifdef UBRR0H\r
 \r
@@ -468,6 +657,7 @@ irmp_protocol_names[IRMP_N_PROTOCOLS + 1] =
 \r
 #endif //UBRR0H\r
 #endif //IRMP_EXT_LOGGING\r
+#endif //ARM_STM32F4XX\r
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
  *  Initialize  UART\r
@@ -477,6 +667,46 @@ irmp_protocol_names[IRMP_N_PROTOCOLS + 1] =
 void\r
 irmp_uart_init (void)\r
 {\r
+#ifndef UNIX_OR_WINDOWS\r
+#if defined(ARM_STM32F4XX)\r
+    GPIO_InitTypeDef GPIO_InitStructure;\r
+    USART_InitTypeDef USART_InitStructure;\r
+\r
+    // Clock enable vom TX Pin\r
+    RCC_AHB1PeriphClockCmd(STM32_GPIO_CLOCK, ENABLE);\r
+\r
+    // Clock enable der UART\r
+    RCC_APB1PeriphClockCmd(STM32_UART_CLOCK, ENABLE);\r
+\r
+    // UART Alternative-Funktion mit dem IO-Pin verbinden\r
+    GPIO_PinAFConfig(STM32_GPIO_PORT,STM32_GPIO_SOURCE,STM32_UART_AF);\r
+\r
+    // UART als Alternative-Funktion mit PushPull\r
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;\r
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;\r
+    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;\r
+    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;\r
+\r
+    // TX-Pin\r
+    GPIO_InitStructure.GPIO_Pin = STM32_GPIO_PIN;\r
+    GPIO_Init(STM32_GPIO_PORT, &GPIO_InitStructure);\r
+\r
+    // Oversampling\r
+    USART_OverSampling8Cmd(STM32_UART_COM, ENABLE);\r
+\r
+    // init mit Baudrate, 8Databits, 1Stopbit, keine Parität, kein RTS+CTS\r
+    USART_InitStructure.USART_BaudRate = STM32_UART_BAUD;\r
+    USART_InitStructure.USART_WordLength = USART_WordLength_8b;\r
+    USART_InitStructure.USART_StopBits = USART_StopBits_1;\r
+    USART_InitStructure.USART_Parity = USART_Parity_No;\r
+    USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;\r
+    USART_InitStructure.USART_Mode = USART_Mode_Tx;\r
+    USART_Init(STM32_UART_COM, &USART_InitStructure);\r
+\r
+    // UART enable\r
+    USART_Cmd(STM32_UART_COM, ENABLE);\r
+\r
+#else\r
 #if (IRMP_EXT_LOGGING == 0)                                                                         // use UART\r
     UART0_UBRRH = UBRRH_VALUE;                                                                      // set baud rate\r
     UART0_UBRRL = UBRRL_VALUE;\r
@@ -490,8 +720,10 @@ irmp_uart_init (void)
     UART0_UCSRC = UART0_UCSZ1_BIT_VALUE | UART0_UCSZ0_BIT_VALUE | UART0_URSEL_BIT_VALUE;\r
     UART0_UCSRB |= UART0_TXEN_BIT_VALUE;                                                            // enable UART TX\r
 #else                                                                                               // other log method\r
-        initextlog();                                                         \r
+    initextlog();                                                         \r
 #endif //IRMP_EXT_LOGGING\r
+#endif //ARM_STM32F4XX\r
+#endif // UNIX_OR_WINDOWS\r
 }\r
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
@@ -503,16 +735,41 @@ irmp_uart_init (void)
 void\r
 irmp_uart_putc (unsigned char ch)\r
 {\r
+#ifndef UNIX_OR_WINDOWS\r
+#if defined(ARM_STM32F4XX)\r
+    // warten bis altes Byte gesendet wurde\r
+    while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET)\r
+    {\r
+        ;\r
+    }\r
+\r
+    USART_SendData(STM32_UART_COM, ch);\r
+\r
+    if (ch == '\n')\r
+    {\r
+        while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET);\r
+        USART_SendData(STM32_UART_COM, '\r');\r
+    }\r
+\r
+#else\r
 #if (IRMP_EXT_LOGGING == 0)\r
+\r
     while (!(UART0_UCSRA & UART0_UDRE_BIT_VALUE))\r
     {\r
         ;\r
     }\r
 \r
     UART0_UDR = ch;\r
+\r
 #else\r
-    sendextlog(ch); //Use external log\r
-#endif\r
+\r
+    sendextlog(ch);                                                         // use external log\r
+\r
+#endif //IRMP_EXT_LOGGING\r
+#endif //ARM_STM32F4XX\r
+#else\r
+    fputc (ch, stderr);\r
+#endif // UNIX_OR_WINDOWS\r
 }\r
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
@@ -528,9 +785,10 @@ static void
 irmp_log (uint8_t val)\r
 {\r
     static uint8_t  buf[DATALEN];                                           // logging buffer\r
-    static uint16_t buf_idx;                                                // number of written bits\r
+    static uint16_t buf_idx;                                                // index\r
     static uint8_t  startcycles;                                            // current number of start-zeros\r
     static uint16_t cnt;                                                    // counts sequenced highbits - to detect end\r
+    static uint8_t  last_val = 1;\r
 \r
     if (! val && (startcycles < STARTCYCLES) && !buf_idx)                   // prevent that single random zeros init logging\r
     {\r
@@ -540,54 +798,72 @@ irmp_log (uint8_t val)
     {\r
         startcycles = 0;\r
 \r
-        if (! val || (val && buf_idx != 0))                                 // start or continue logging on "0", "1" cannot init logging\r
+        if (! val || buf_idx != 0)                                          // start or continue logging on "0", "1" cannot init logging\r
         {\r
-            if (buf_idx < DATALEN * 8)                                      // index in range?\r
-            {                                                               // yes\r
-                if (val)\r
-                {\r
-                    buf[(buf_idx / 8)] |=  (1<<(buf_idx % 8));              // set bit\r
-                }\r
-                else\r
-                {\r
-                    buf[(buf_idx / 8)] &= ~(1<<(buf_idx % 8));              // reset bit\r
-                }\r
-\r
-                buf_idx++;\r
-            }\r
-\r
-            if (val)\r
-            {                                                               // if high received then look at log-stop condition\r
+            if (last_val == val)\r
+            {\r
                 cnt++;\r
 \r
-                if (cnt > ENDBITS)\r
+                if (val && cnt > ENDBITS)                                   // if high received then look at log-stop condition\r
                 {                                                           // if stop condition is true, output on uart\r
-                    uint16_t i;\r
+                    uint8_t     i8;\r
+                    uint16_t    i;\r
+                    uint16_t    j;\r
+                    uint8_t     v = '1';\r
+                    uint16_t    d;\r
 \r
-                    for (i = 0; i < STARTCYCLES; i++)\r
+                    for (i8 = 0; i8 < STARTCYCLES; i8++)\r
                     {\r
                         irmp_uart_putc ('0');                               // the ignored starting zeros\r
                     }\r
 \r
-                    for (i = 0; i < (buf_idx - ENDBITS + 20) / 8; i++)      // transform bitset into uart chars\r
+                    for (i = 0; i < buf_idx; i++)\r
                     {\r
-                        uint8_t d = buf[i];\r
-                        uint8_t j;\r
+                        d = buf[i];\r
+\r
+                        if (d == 0xff)\r
+                        {\r
+                            i++;\r
+                            d = buf[i];\r
+                            i++;\r
+                            d |= ((uint16_t) buf[i] << 8);\r
+                        }\r
 \r
-                        for (j = 0; j < 8; j++)\r
+                        for (j = 0; j < d; j++)\r
                         {\r
-                            irmp_uart_putc ((d & 1) + '0');\r
-                            d >>= 1;\r
+                            irmp_uart_putc (v);\r
                         }\r
+\r
+                        v = (v == '1') ? '0' : '1';\r
+                    }\r
+\r
+                    for (i8 = 0; i8 < 20; i8++)\r
+                    {\r
+                        irmp_uart_putc ('1');\r
                     }\r
 \r
                     irmp_uart_putc ('\n');\r
                     buf_idx = 0;\r
+                    last_val = 1;\r
+                    cnt = 0;\r
                 }\r
             }\r
-            else\r
+            else if (buf_idx < DATALEN - 3)\r
             {\r
-                cnt = 0;\r
+                if (cnt >= 0xff)\r
+                {\r
+                    buf[buf_idx++]  = 0xff;\r
+                    buf[buf_idx++]  = (cnt & 0xff);\r
+                    buf[buf_idx]    = (cnt >> 8);\r
+                }\r
+                else\r
+                {\r
+                    buf[buf_idx] = cnt;\r
+                }\r
+\r
+                buf_idx++;\r
+                cnt = 1;\r
+                last_val = val;\r
             }\r
         }\r
     }\r
@@ -714,6 +990,31 @@ static const PROGMEM IRMP_PARAMETER nec42_param =
 \r
 #endif\r
 \r
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER lgair_param =\r
+{\r
+    IRMP_LGAIR_PROTOCOL,                                                // protocol:        ir protocol\r
+    NEC_PULSE_LEN_MIN,                                                  // pulse_1_len_min: minimum length of pulse with bit value 1\r
+    NEC_PULSE_LEN_MAX,                                                  // pulse_1_len_max: maximum length of pulse with bit value 1\r
+    NEC_1_PAUSE_LEN_MIN,                                                // pause_1_len_min: minimum length of pause with bit value 1\r
+    NEC_1_PAUSE_LEN_MAX,                                                // pause_1_len_max: maximum length of pause with bit value 1\r
+    NEC_PULSE_LEN_MIN,                                                  // pulse_0_len_min: minimum length of pulse with bit value 0\r
+    NEC_PULSE_LEN_MAX,                                                  // pulse_0_len_max: maximum length of pulse with bit value 0\r
+    NEC_0_PAUSE_LEN_MIN,                                                // pause_0_len_min: minimum length of pause with bit value 0\r
+    NEC_0_PAUSE_LEN_MAX,                                                // pause_0_len_max: maximum length of pause with bit value 0\r
+    LGAIR_ADDRESS_OFFSET,                                               // address_offset:  address offset\r
+    LGAIR_ADDRESS_OFFSET + LGAIR_ADDRESS_LEN,                           // address_end:     end of address\r
+    LGAIR_COMMAND_OFFSET,                                               // command_offset:  command offset\r
+    LGAIR_COMMAND_OFFSET + LGAIR_COMMAND_LEN,                           // command_end:     end of command\r
+    LGAIR_COMPLETE_DATA_LEN,                                            // complete_len:    complete length of frame\r
+    NEC_STOP_BIT,                                                       // stop_bit:        flag: frame has stop bit\r
+    NEC_LSB,                                                            // lsb_first:       flag: LSB first\r
+    NEC_FLAGS                                                           // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
 #if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
 \r
 static const PROGMEM IRMP_PARAMETER samsung_param =\r
@@ -739,6 +1040,31 @@ static const PROGMEM IRMP_PARAMETER samsung_param =
 \r
 #endif\r
 \r
+#if IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER telefunken_param =\r
+{\r
+    IRMP_TELEFUNKEN_PROTOCOL,                                           // protocol:        ir protocol\r
+    TELEFUNKEN_PULSE_LEN_MIN,                                           // pulse_1_len_min: minimum length of pulse with bit value 1\r
+    TELEFUNKEN_PULSE_LEN_MAX,                                           // pulse_1_len_max: maximum length of pulse with bit value 1\r
+    TELEFUNKEN_1_PAUSE_LEN_MIN,                                         // pause_1_len_min: minimum length of pause with bit value 1\r
+    TELEFUNKEN_1_PAUSE_LEN_MAX,                                         // pause_1_len_max: maximum length of pause with bit value 1\r
+    TELEFUNKEN_PULSE_LEN_MIN,                                           // pulse_0_len_min: minimum length of pulse with bit value 0\r
+    TELEFUNKEN_PULSE_LEN_MAX,                                           // pulse_0_len_max: maximum length of pulse with bit value 0\r
+    TELEFUNKEN_0_PAUSE_LEN_MIN,                                         // pause_0_len_min: minimum length of pause with bit value 0\r
+    TELEFUNKEN_0_PAUSE_LEN_MAX,                                         // pause_0_len_max: maximum length of pause with bit value 0\r
+    TELEFUNKEN_ADDRESS_OFFSET,                                          // address_offset:  address offset\r
+    TELEFUNKEN_ADDRESS_OFFSET + TELEFUNKEN_ADDRESS_LEN,                 // address_end:     end of address\r
+    TELEFUNKEN_COMMAND_OFFSET,                                          // command_offset:  command offset\r
+    TELEFUNKEN_COMMAND_OFFSET + TELEFUNKEN_COMMAND_LEN,                 // command_end:     end of command\r
+    TELEFUNKEN_COMPLETE_DATA_LEN,                                       // complete_len:    complete length of frame\r
+    TELEFUNKEN_STOP_BIT,                                                // stop_bit:        flag: frame has stop bit\r
+    TELEFUNKEN_LSB,                                                     // lsb_first:       flag: LSB first\r
+    TELEFUNKEN_FLAGS                                                    // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
 #if IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1\r
 \r
 static const PROGMEM IRMP_PARAMETER matsushita_param =\r
@@ -940,6 +1266,31 @@ static const PROGMEM IRMP_PARAMETER nubert_param =
 \r
 #endif\r
 \r
+#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER speaker_param =\r
+{\r
+    IRMP_SPEAKER_PROTOCOL,                                              // protocol:        ir protocol\r
+    SPEAKER_1_PULSE_LEN_MIN,                                            // pulse_1_len_min: minimum length of pulse with bit value 1\r
+    SPEAKER_1_PULSE_LEN_MAX,                                            // pulse_1_len_max: maximum length of pulse with bit value 1\r
+    SPEAKER_1_PAUSE_LEN_MIN,                                            // pause_1_len_min: minimum length of pause with bit value 1\r
+    SPEAKER_1_PAUSE_LEN_MAX,                                            // pause_1_len_max: maximum length of pause with bit value 1\r
+    SPEAKER_0_PULSE_LEN_MIN,                                            // pulse_0_len_min: minimum length of pulse with bit value 0\r
+    SPEAKER_0_PULSE_LEN_MAX,                                            // pulse_0_len_max: maximum length of pulse with bit value 0\r
+    SPEAKER_0_PAUSE_LEN_MIN,                                            // pause_0_len_min: minimum length of pause with bit value 0\r
+    SPEAKER_0_PAUSE_LEN_MAX,                                            // pause_0_len_max: maximum length of pause with bit value 0\r
+    SPEAKER_ADDRESS_OFFSET,                                             // address_offset:  address offset\r
+    SPEAKER_ADDRESS_OFFSET + SPEAKER_ADDRESS_LEN,                       // address_end:     end of address\r
+    SPEAKER_COMMAND_OFFSET,                                             // command_offset:  command offset\r
+    SPEAKER_COMMAND_OFFSET + SPEAKER_COMMAND_LEN,                       // command_end:     end of command\r
+    SPEAKER_COMPLETE_DATA_LEN,                                          // complete_len:    complete length of frame\r
+    SPEAKER_STOP_BIT,                                                   // stop_bit:        flag: frame has stop bit\r
+    SPEAKER_LSB,                                                        // lsb_first:       flag: LSB first\r
+    SPEAKER_FLAGS                                                       // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
 #if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1\r
 \r
 static const PROGMEM IRMP_PARAMETER bang_olufsen_param =\r
@@ -1193,6 +1544,160 @@ static const PROGMEM IRMP_PARAMETER thomson_param =
 \r
 #endif\r
 \r
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER bose_param =\r
+{\r
+    IRMP_BOSE_PROTOCOL,                                                 // protocol:        ir protocol\r
+    BOSE_PULSE_LEN_MIN,                                                 // pulse_1_len_min: minimum length of pulse with bit value 1\r
+    BOSE_PULSE_LEN_MAX,                                                 // pulse_1_len_max: maximum length of pulse with bit value 1\r
+    BOSE_1_PAUSE_LEN_MIN,                                               // pause_1_len_min: minimum length of pause with bit value 1\r
+    BOSE_1_PAUSE_LEN_MAX,                                               // pause_1_len_max: maximum length of pause with bit value 1\r
+    BOSE_PULSE_LEN_MIN,                                                 // pulse_0_len_min: minimum length of pulse with bit value 0\r
+    BOSE_PULSE_LEN_MAX,                                                 // pulse_0_len_max: maximum length of pulse with bit value 0\r
+    BOSE_0_PAUSE_LEN_MIN,                                               // pause_0_len_min: minimum length of pause with bit value 0\r
+    BOSE_0_PAUSE_LEN_MAX,                                               // pause_0_len_max: maximum length of pause with bit value 0\r
+    BOSE_ADDRESS_OFFSET,                                                // address_offset:  address offset\r
+    BOSE_ADDRESS_OFFSET + BOSE_ADDRESS_LEN,                             // address_end:     end of address\r
+    BOSE_COMMAND_OFFSET,                                                // command_offset:  command offset\r
+    BOSE_COMMAND_OFFSET + BOSE_COMMAND_LEN,                             // command_end:     end of command\r
+    BOSE_COMPLETE_DATA_LEN,                                             // complete_len:    complete length of frame\r
+    BOSE_STOP_BIT,                                                      // stop_bit:        flag: frame has stop bit\r
+    BOSE_LSB,                                                           // lsb_first:       flag: LSB first\r
+    BOSE_FLAGS                                                          // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
+#if IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER a1tvbox_param =\r
+{\r
+    IRMP_A1TVBOX_PROTOCOL,                                              // protocol:        ir protocol\r
+\r
+    A1TVBOX_BIT_PULSE_LEN_MIN,                                          // pulse_1_len_min: here: minimum length of short pulse\r
+    A1TVBOX_BIT_PULSE_LEN_MAX,                                          // pulse_1_len_max: here: maximum length of short pulse\r
+    A1TVBOX_BIT_PAUSE_LEN_MIN,                                          // pause_1_len_min: here: minimum length of short pause\r
+    A1TVBOX_BIT_PAUSE_LEN_MAX,                                          // pause_1_len_max: here: maximum length of short pause\r
+    0,                                                                  // pulse_0_len_min: here: not used\r
+    0,                                                                  // pulse_0_len_max: here: not used\r
+    0,                                                                  // pause_0_len_min: here: not used\r
+    0,                                                                  // pause_0_len_max: here: not used\r
+    A1TVBOX_ADDRESS_OFFSET,                                             // address_offset:  address offset\r
+    A1TVBOX_ADDRESS_OFFSET + A1TVBOX_ADDRESS_LEN,                       // address_end:     end of address\r
+    A1TVBOX_COMMAND_OFFSET,                                             // command_offset:  command offset\r
+    A1TVBOX_COMMAND_OFFSET + A1TVBOX_COMMAND_LEN,                       // command_end:     end of command\r
+    A1TVBOX_COMPLETE_DATA_LEN,                                          // complete_len:    complete length of frame\r
+    A1TVBOX_STOP_BIT,                                                   // stop_bit:        flag: frame has stop bit\r
+    A1TVBOX_LSB,                                                        // lsb_first:       flag: LSB first\r
+    A1TVBOX_FLAGS                                                       // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER ortek_param =\r
+{\r
+    IRMP_ORTEK_PROTOCOL,                                                // protocol:        ir protocol\r
+\r
+    ORTEK_BIT_PULSE_LEN_MIN,                                            // pulse_1_len_min: here: minimum length of short pulse\r
+    ORTEK_BIT_PULSE_LEN_MAX,                                            // pulse_1_len_max: here: maximum length of short pulse\r
+    ORTEK_BIT_PAUSE_LEN_MIN,                                            // pause_1_len_min: here: minimum length of short pause\r
+    ORTEK_BIT_PAUSE_LEN_MAX,                                            // pause_1_len_max: here: maximum length of short pause\r
+    0,                                                                  // pulse_0_len_min: here: not used\r
+    0,                                                                  // pulse_0_len_max: here: not used\r
+    0,                                                                  // pause_0_len_min: here: not used\r
+    0,                                                                  // pause_0_len_max: here: not used\r
+    ORTEK_ADDRESS_OFFSET,                                               // address_offset:  address offset\r
+    ORTEK_ADDRESS_OFFSET + ORTEK_ADDRESS_LEN,                           // address_end:     end of address\r
+    ORTEK_COMMAND_OFFSET,                                               // command_offset:  command offset\r
+    ORTEK_COMMAND_OFFSET + ORTEK_COMMAND_LEN,                           // command_end:     end of command\r
+    ORTEK_COMPLETE_DATA_LEN,                                            // complete_len:    complete length of frame\r
+    ORTEK_STOP_BIT,                                                     // stop_bit:        flag: frame has stop bit\r
+    ORTEK_LSB,                                                          // lsb_first:       flag: LSB first\r
+    ORTEK_FLAGS                                                         // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
+#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER roomba_param =\r
+{\r
+    IRMP_ROOMBA_PROTOCOL,                                               // protocol:        ir protocol\r
+    ROOMBA_1_PULSE_LEN_MIN,                                             // pulse_1_len_min: minimum length of pulse with bit value 1\r
+    ROOMBA_1_PULSE_LEN_MAX,                                             // pulse_1_len_max: maximum length of pulse with bit value 1\r
+    ROOMBA_1_PAUSE_LEN_MIN,                                             // pause_1_len_min: minimum length of pause with bit value 1\r
+    ROOMBA_1_PAUSE_LEN_MAX,                                             // pause_1_len_max: maximum length of pause with bit value 1\r
+    ROOMBA_0_PULSE_LEN_MIN,                                             // pulse_0_len_min: minimum length of pulse with bit value 0\r
+    ROOMBA_0_PULSE_LEN_MAX,                                             // pulse_0_len_max: maximum length of pulse with bit value 0\r
+    ROOMBA_0_PAUSE_LEN_MIN,                                             // pause_0_len_min: minimum length of pause with bit value 0\r
+    ROOMBA_0_PAUSE_LEN_MAX,                                             // pause_0_len_max: maximum length of pause with bit value 0\r
+    ROOMBA_ADDRESS_OFFSET,                                              // address_offset:  address offset\r
+    ROOMBA_ADDRESS_OFFSET + ROOMBA_ADDRESS_LEN,                         // address_end:     end of address\r
+    ROOMBA_COMMAND_OFFSET,                                              // command_offset:  command offset\r
+    ROOMBA_COMMAND_OFFSET + ROOMBA_COMMAND_LEN,                         // command_end:     end of command\r
+    ROOMBA_COMPLETE_DATA_LEN,                                           // complete_len:    complete length of frame\r
+    ROOMBA_STOP_BIT,                                                    // stop_bit:        flag: frame has stop bit\r
+    ROOMBA_LSB,                                                         // lsb_first:       flag: LSB first\r
+    ROOMBA_FLAGS                                                        // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER rcmm_param =\r
+{\r
+    IRMP_RCMM32_PROTOCOL,                                               // protocol:        ir protocol\r
+   \r
+    RCMM32_BIT_PULSE_LEN_MIN,                                           // pulse_1_len_min: here: minimum length of short pulse\r
+    RCMM32_BIT_PULSE_LEN_MAX,                                           // pulse_1_len_max: here: maximum length of short pulse\r
+    0,                                                                  // pause_1_len_min: here: minimum length of short pause\r
+    0,                                                                  // pause_1_len_max: here: maximum length of short pause\r
+    RCMM32_BIT_PULSE_LEN_MIN,                                           // pulse_0_len_min: here: not used\r
+    RCMM32_BIT_PULSE_LEN_MAX,                                           // pulse_0_len_max: here: not used\r
+    0,                                                                  // pause_0_len_min: here: not used\r
+    0,                                                                  // pause_0_len_max: here: not used\r
+    RCMM32_ADDRESS_OFFSET,                                              // address_offset:  address offset\r
+    RCMM32_ADDRESS_OFFSET + RCMM32_ADDRESS_LEN,                         // address_end:     end of address\r
+    RCMM32_COMMAND_OFFSET,                                              // command_offset:  command offset\r
+    RCMM32_COMMAND_OFFSET + RCMM32_COMMAND_LEN,                         // command_end:     end of command\r
+    RCMM32_COMPLETE_DATA_LEN,                                           // complete_len:    complete length of frame\r
+    RCMM32_STOP_BIT,                                                    // stop_bit:        flag: frame has stop bit\r
+    RCMM32_LSB,                                                         // lsb_first:       flag: LSB first\r
+    RCMM32_FLAGS                                                        // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
+#if IRMP_SUPPORT_RADIO1_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER radio1_param =\r
+{\r
+    IRMP_RADIO1_PROTOCOL,                                               // protocol:        ir protocol\r
+   \r
+    RADIO1_1_PULSE_LEN_MIN,                                             // pulse_1_len_min: minimum length of pulse with bit value 1\r
+    RADIO1_1_PULSE_LEN_MAX,                                             // pulse_1_len_max: maximum length of pulse with bit value 1\r
+    RADIO1_1_PAUSE_LEN_MIN,                                             // pause_1_len_min: minimum length of pause with bit value 1\r
+    RADIO1_1_PAUSE_LEN_MAX,                                             // pause_1_len_max: maximum length of pause with bit value 1\r
+    RADIO1_0_PULSE_LEN_MIN,                                             // pulse_0_len_min: minimum length of pulse with bit value 0\r
+    RADIO1_0_PULSE_LEN_MAX,                                             // pulse_0_len_max: maximum length of pulse with bit value 0\r
+    RADIO1_0_PAUSE_LEN_MIN,                                             // pause_0_len_min: minimum length of pause with bit value 0\r
+    RADIO1_0_PAUSE_LEN_MAX,                                             // pause_0_len_max: maximum length of pause with bit value 0\r
+    RADIO1_ADDRESS_OFFSET,                                              // address_offset:  address offset\r
+    RADIO1_ADDRESS_OFFSET + RADIO1_ADDRESS_LEN,                         // address_end:     end of address\r
+    RADIO1_COMMAND_OFFSET,                                              // command_offset:  command offset\r
+    RADIO1_COMMAND_OFFSET + RADIO1_COMMAND_LEN,                         // command_end:     end of command\r
+    RADIO1_COMPLETE_DATA_LEN,                                           // complete_len:    complete length of frame\r
+    RADIO1_STOP_BIT,                                                    // stop_bit:        flag: frame has stop bit\r
+    RADIO1_LSB,                                                         // lsb_first:       flag: LSB first\r
+    RADIO1_FLAGS                                                        // flags:           some flags\r
+};\r
+\r
+#endif\r
+\r
 static uint8_t                              irmp_bit;                   // current bit position\r
 static IRMP_PARAMETER                       irmp_param;\r
 \r
@@ -1200,7 +1705,7 @@ static IRMP_PARAMETER                       irmp_param;
 static IRMP_PARAMETER                       irmp_param2;\r
 #endif\r
 \r
-static volatile uint8_t                     irmp_ir_detected;\r
+static volatile uint8_t                     irmp_ir_detected = FALSE;\r
 static volatile uint8_t                     irmp_protocol;\r
 static volatile uint16_t                    irmp_address;\r
 static volatile uint16_t                    irmp_command;\r
@@ -1211,6 +1716,7 @@ static volatile uint8_t                     irmp_flags;
 #ifdef ANALYZE\r
 #define input(x)                            (x)\r
 static uint8_t                              IRMP_PIN;\r
+static uint8_t                              radio;\r
 #endif\r
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
@@ -1238,23 +1744,24 @@ irmp_init (void)
    /* GPIO Configuration */\r
    GPIO_InitStructure.GPIO_Pin = IRMP_BIT;\r
  #if defined (ARM_STM32L1XX) || defined (ARM_STM32F4XX)\r
-   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;\r
+   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;\r
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;\r
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;\r
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;\r
  #elif defined (ARM_STM32F10X)\r
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;\r
-   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;\r
+   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;\r
  #endif\r
    GPIO_Init(IRMP_PORT, &GPIO_InitStructure);\r
-\r
-   /* GPIO Configuration */\r
-   GPIO_InitStructure.GPIO_Pin = IRMP_BIT;\r
-   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;\r
-   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;\r
-   GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;\r
-   GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;\r
-   GPIO_Init(IRMP_PORT, &GPIO_InitStructure);\r
+#elif defined(STELLARIS_ARM_CORTEX_M4)\r
+     // Enable the GPIO port\r
+     ROM_SysCtlPeripheralEnable(IRMP_PORT_PERIPH);\r
+\r
+     // Set as an input\r
+     ROM_GPIODirModeSet(IRMP_PORT_BASE, IRMP_PORT_PIN, GPIO_DIR_MODE_IN);\r
+     ROM_GPIOPadConfigSet(IRMP_PORT_BASE, IRMP_PORT_PIN,\r
+                          GPIO_STRENGTH_2MA,\r
+                          GPIO_PIN_TYPE_STD_WPU);\r
 #else                                                                   // AVR\r
     IRMP_PORT &= ~(1<<IRMP_BIT);                                        // deactivate pullup\r
     IRMP_DDR &= ~(1<<IRMP_BIT);                                         // set pin to input\r
@@ -1290,7 +1797,15 @@ irmp_get_data (IRMP_DATA * irmp_data_p)
                     rtc = TRUE;\r
                 }\r
                 break;\r
+\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+            case IRMP_SAMSUNG48_PROTOCOL:\r
+                irmp_command = (irmp_command & 0x00FF) | ((irmp_id & 0x00FF) << 8);\r
+                rtc = TRUE;\r
+                break;\r
 #endif\r
+#endif\r
+\r
 #if IRMP_SUPPORT_NEC_PROTOCOL == 1\r
             case IRMP_NEC_PROTOCOL:\r
                 if ((irmp_command >> 8) == (~irmp_command & 0x00FF))\r
@@ -1300,7 +1815,9 @@ irmp_get_data (IRMP_DATA * irmp_data_p)
                 }\r
                 else if (irmp_address == 0x87EE)\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("Switching to APPLE protocol\n");\r
+#endif // ANALYZE\r
                     irmp_protocol = IRMP_APPLE_PROTOCOL;\r
                     irmp_address = (irmp_command & 0xFF00) >> 8;\r
                     irmp_command &= 0x00FF;\r
@@ -1308,6 +1825,15 @@ irmp_get_data (IRMP_DATA * irmp_data_p)
                 }\r
                 break;\r
 #endif\r
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1\r
+            case IRMP_BOSE_PROTOCOL:\r
+                if ((irmp_command >> 8) == (~irmp_command & 0x00FF))\r
+                {\r
+                    irmp_command &= 0xff;\r
+                    rtc = TRUE;\r
+                }\r
+                break;\r
+#endif\r
 #if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1\r
             case IRMP_SIEMENS_PROTOCOL:\r
             case IRMP_RUWIDO_PROTOCOL:\r
@@ -1340,7 +1866,9 @@ irmp_get_data (IRMP_DATA * irmp_data_p)
                 }\r
                 else\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF("Info IR60: got start instruction frame\n");\r
+#endif // ANALYZE\r
                 }\r
                 break;\r
 #endif\r
@@ -1375,12 +1903,16 @@ irmp_get_data (IRMP_DATA * irmp_data_p)
                     }\r
                     else\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF("error NETBOX: bit6/7 must be 0/1\n");\r
+#endif // ANALYZE\r
                     }\r
                 }\r
                 else\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF("error NETBOX: last bit not set\n");\r
+#endif // ANALYZE\r
                 }\r
                 break;\r
 #endif\r
@@ -1396,12 +1928,15 @@ irmp_get_data (IRMP_DATA * irmp_data_p)
                 }\r
                 else\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("CRC error in LEGO protocol\n");\r
-                    rtc = TRUE;\r
+#endif // ANALYZE\r
+                    // rtc = TRUE;                              // don't accept codes with CRC errors\r
                 }\r
                 break;\r
             }\r
 #endif\r
+\r
             default:\r
             {\r
                 rtc = TRUE;\r
@@ -1444,11 +1979,16 @@ irmp_set_callback_ptr (void (*cb)(uint8_t))
 static uint16_t irmp_tmp_address;                                                       // ir address\r
 static uint16_t irmp_tmp_command;                                                       // ir command\r
 \r
-#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+#if (IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
 static uint16_t irmp_tmp_address2;                                                      // ir address\r
 static uint16_t irmp_tmp_command2;                                                      // ir command\r
 #endif\r
 \r
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
+static uint16_t irmp_lgair_address;                                                     // ir address\r
+static uint16_t irmp_lgair_command;                                                     // ir command\r
+#endif\r
+\r
 #if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
 static uint16_t irmp_tmp_id;                                                            // ir id (only SAMSUNG)\r
 #endif\r
@@ -1457,6 +1997,10 @@ static uint8_t  xor_check[6];
 static uint8_t  genre2;                                                                 // save genre2 bits here, later copied to MSB in flags\r
 #endif\r
 \r
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+static uint8_t  parity;                                                                 // number of '1' of the first 14 bits, check if even.\r
+#endif\r
+\r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
  *  store bit\r
  *  @details  store bit in temp address or temp command\r
@@ -1469,6 +2013,44 @@ static uint8_t  genre2;
 static void\r
 irmp_store_bit (uint8_t value)\r
 {\r
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+    if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL)\r
+    {\r
+        if (irmp_bit < 14)\r
+        {\r
+            if (value)\r
+            {\r
+                parity++;\r
+            }\r
+        }\r
+        else if (irmp_bit == 14)\r
+        {\r
+            if (value)                                                                                      // value == 1: even parity\r
+            {\r
+                if (parity & 0x01)\r
+                {\r
+                    parity = PARITY_CHECK_FAILED;\r
+                }\r
+                else\r
+                {\r
+                    parity = PARITY_CHECK_OK;\r
+                }\r
+            }\r
+            else\r
+            {\r
+                if (parity & 0x01)                                                                          // value == 0: odd parity\r
+                {\r
+                    parity = PARITY_CHECK_OK;\r
+                }\r
+                else\r
+                {\r
+                    parity = PARITY_CHECK_FAILED;\r
+                }\r
+            }\r
+        }\r
+    }\r
+#endif\r
+\r
 #if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1\r
     if (irmp_bit == 0 && irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL)\r
     {\r
@@ -1493,7 +2075,16 @@ irmp_store_bit (uint8_t value)
     {\r
         if (irmp_param.lsb_first)\r
         {\r
-            irmp_tmp_command |= (((uint16_t) (value)) << (irmp_bit - irmp_param.command_offset));   // CV wants cast\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+            if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit >= 32)\r
+            {\r
+                irmp_tmp_id |= (((uint16_t) (value)) << (irmp_bit - 32));   // CV wants cast\r
+            }\r
+            else\r
+#endif\r
+            {\r
+                irmp_tmp_command |= (((uint16_t) (value)) << (irmp_bit - irmp_param.command_offset));   // CV wants cast\r
+            }\r
         }\r
         else\r
         {\r
@@ -1502,6 +2093,23 @@ irmp_store_bit (uint8_t value)
         }\r
     }\r
 \r
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
+    if (irmp_param.protocol == IRMP_NEC_PROTOCOL || irmp_param.protocol == IRMP_NEC42_PROTOCOL)\r
+    {\r
+        if (irmp_bit < 8)\r
+        {\r
+            irmp_lgair_address <<= 1;                                                               // LGAIR uses MSB\r
+            irmp_lgair_address |= value;\r
+        }\r
+        else if (irmp_bit < 24)\r
+        {\r
+            irmp_lgair_command <<= 1;                                                               // LGAIR uses MSB\r
+            irmp_lgair_command |= value;\r
+        }\r
+    }\r
+    // NO else!\r
+#endif\r
+\r
 #if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
     if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit >= 13 && irmp_bit < 26)\r
     {\r
@@ -1542,7 +2150,11 @@ irmp_store_bit (uint8_t value)
             }\r
         }\r
     }\r
+    else\r
 #endif\r
+    {\r
+        ;\r
+    }\r
 \r
     irmp_bit++;\r
 }\r
@@ -1594,10 +2206,11 @@ irmp_ISR (void)
     static PAUSE_LEN    irmp_pause_time;                                        // count bit time for pause\r
     static uint16_t     last_irmp_address = 0xFFFF;                             // save last irmp address to recognize key repetition\r
     static uint16_t     last_irmp_command = 0xFFFF;                             // save last irmp command to recognize key repetition\r
-    static uint16_t     repetition_len;                                         // SIRCS repeats frame 2-5 times with 45 ms pause\r
+    static uint16_t     key_repetition_len;                                     // SIRCS repeats frame 2-5 times with 45 ms pause\r
     static uint8_t      repetition_frame_number;\r
 #if IRMP_SUPPORT_DENON_PROTOCOL == 1\r
     static uint16_t     last_irmp_denon_command;                                // save last irmp command to recognize DENON frame repetition\r
+    static uint16_t     denon_repetition_len = 0xFFFF;                          // denon repetition len of 2nd auto generated frame\r
 #endif\r
 #if IRMP_SUPPORT_RC5_PROTOCOL == 1\r
     static uint8_t      rc5_cmd_bit6;                                           // bit 6 of RC5 command is the inverted 2nd start bit\r
@@ -1612,7 +2225,7 @@ irmp_ISR (void)
 \r
 #ifdef ANALYZE\r
     time_counter++;\r
-#endif\r
+#endif // ANALYZE\r
 \r
     irmp_input = input(IRMP_PIN);\r
 \r
@@ -1643,7 +2256,7 @@ irmp_ISR (void)
                 {\r
                     ANALYZE_PRINTF("%8.3fms [starting pulse]\n", (double) (time_counter * 1000) / F_INTERRUPTS);\r
                 }\r
-#endif\r
+#endif // ANALYZE\r
                 irmp_pulse_time++;                                              // increment counter\r
             }\r
             else\r
@@ -1658,12 +2271,18 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1\r
                     genre2                  = 0;\r
 #endif\r
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
+                    irmp_tmp_id = 0;\r
+#endif\r
 \r
 #if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
                     irmp_tmp_command2       = 0;\r
                     irmp_tmp_address2       = 0;\r
 #endif\r
-\r
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
+                    irmp_lgair_command      = 0;\r
+                    irmp_lgair_address      = 0;\r
+#endif\r
                     irmp_bit                = 0xff;\r
                     irmp_pause_time         = 1;                                // 1st pause: set to 1, not to 0!\r
 #if IRMP_SUPPORT_RC5_PROTOCOL == 1\r
@@ -1672,16 +2291,24 @@ irmp_ISR (void)
                 }\r
                 else\r
                 {\r
-                    if (repetition_len < 0xFFFF)                                // avoid overflow of counter\r
+                    if (key_repetition_len < 0xFFFF)                            // avoid overflow of counter\r
                     {\r
-                        repetition_len++;\r
+                        key_repetition_len++;\r
 \r
 #if IRMP_SUPPORT_DENON_PROTOCOL == 1\r
-                        if (repetition_len >= DENON_AUTO_REPETITION_PAUSE_LEN && last_irmp_denon_command != 0)\r
+                        if (denon_repetition_len < 0xFFFF)                      // avoid overflow of counter\r
                         {\r
-                            ANALYZE_PRINTF ("%8.3fms error 6: did not receive inverted command repetition\n",\r
-                                            (double) (time_counter * 1000) / F_INTERRUPTS);\r
-                            last_irmp_denon_command = 0;\r
+                            denon_repetition_len++;\r
+\r
+                            if (denon_repetition_len >= DENON_AUTO_REPETITION_PAUSE_LEN && last_irmp_denon_command != 0)\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("%8.3fms warning: did not receive inverted command repetition\n",\r
+                                                (double) (time_counter * 1000) / F_INTERRUPTS);\r
+#endif // ANALYZE\r
+                                last_irmp_denon_command = 0;\r
+                                denon_repetition_len = 0xFFFF;\r
+                            }\r
                         }\r
 #endif // IRMP_SUPPORT_DENON_PROTOCOL == 1\r
                     }\r
@@ -1711,10 +2338,12 @@ irmp_ISR (void)
                         else\r
 #endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("%8.3fms error 1: pause after start bit pulse %d too long: %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);\r
                             ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
+#endif // ANALYZE\r
                         }\r
-//                      irmp_busy_flag = FALSE;\r
+\r
                         irmp_start_bit_detected = 0;                            // reset flags, let's wait for another start bit\r
                         irmp_pulse_time         = 0;\r
                         irmp_pause_time         = 0;\r
@@ -1722,21 +2351,26 @@ irmp_ISR (void)
                 }\r
                 else\r
                 {                                                               // receiving first data pulse!\r
-                    IRMP_PARAMETER * irmp_param_p = (IRMP_PARAMETER *) 0;\r
+                    IRMP_PARAMETER * irmp_param_p;\r
+                    irmp_param_p = (IRMP_PARAMETER *) 0;\r
 \r
 #if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
                     irmp_param2.protocol = 0;\r
 #endif\r
 \r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("%8.3fms [start-bit: pulse = %2d, pause = %2d]\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);\r
+#endif // ANALYZE\r
 \r
 #if IRMP_SUPPORT_SIRCS_PROTOCOL == 1\r
                     if (irmp_pulse_time >= SIRCS_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIRCS_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= SIRCS_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIRCS_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's SIRCS\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = SIRCS, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         SIRCS_START_BIT_PULSE_LEN_MIN, SIRCS_START_BIT_PULSE_LEN_MAX,\r
                                         SIRCS_START_BIT_PAUSE_LEN_MIN, SIRCS_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) (IRMP_PARAMETER *) &sircs_param;\r
                     }\r
                     else\r
@@ -1747,9 +2381,11 @@ irmp_ISR (void)
                         irmp_pulse_time >= JVC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= JVC_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= JVC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= JVC_REPEAT_START_BIT_PAUSE_LEN_MAX)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = NEC or JVC (type 1) repeat frame, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         JVC_START_BIT_PULSE_LEN_MIN, JVC_START_BIT_PULSE_LEN_MAX,\r
                                         JVC_REPEAT_START_BIT_PAUSE_LEN_MIN, JVC_REPEAT_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
                     }\r
                     else\r
@@ -1760,17 +2396,20 @@ irmp_ISR (void)
                         irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)\r
                     {\r
 #if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = NEC42, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
                                         NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &nec42_param;\r
 #else\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = NEC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
                                         NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
 #endif\r
-\r
                     }\r
                     else if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN        && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&\r
                              irmp_pause_time >= NEC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_REPEAT_START_BIT_PAUSE_LEN_MAX)\r
@@ -1778,17 +2417,21 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_JVC_PROTOCOL == 1\r
                         if (irmp_protocol == IRMP_JVC_PROTOCOL)                 // last protocol was JVC, awaiting repeat frame\r
                         {                                                       // some jvc remote controls use nec repetition frame for jvc repetition frame\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("protocol = JVC repeat frame type 2, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                             NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
                                             NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                             irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
                         }\r
                         else\r
 #endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("protocol = NEC (repetition frame), start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                             NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
                                             NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
 \r
                             irmp_param_p = (IRMP_PARAMETER *) &nec_rep_param;\r
                         }\r
@@ -1800,9 +2443,11 @@ irmp_ISR (void)
                         irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= NEC_0_PAUSE_LEN_MIN         && irmp_pause_time <= NEC_0_PAUSE_LEN_MAX)\r
                     {                                                           // it's JVC repetition type 3\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = JVC repeat frame type 3, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
                                         NEC_0_PAUSE_LEN_MIN, NEC_0_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
                     }\r
                     else\r
@@ -1810,13 +2455,43 @@ irmp_ISR (void)
 \r
 #endif // IRMP_SUPPORT_NEC_PROTOCOL == 1\r
 \r
-#if IRMP_SUPPORT_NIKON_PROTOCOL == 1\r
-                    if (irmp_pulse_time >= NIKON_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NIKON_START_BIT_PULSE_LEN_MAX &&\r
+#if IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= TELEFUNKEN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= TELEFUNKEN_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= TELEFUNKEN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= TELEFUNKEN_START_BIT_PAUSE_LEN_MAX)\r
+                    {\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = TELEFUNKEN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        TELEFUNKEN_START_BIT_PULSE_LEN_MIN, TELEFUNKEN_START_BIT_PULSE_LEN_MAX,\r
+                                        TELEFUNKEN_START_BIT_PAUSE_LEN_MIN, TELEFUNKEN_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &telefunken_param;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= ROOMBA_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= ROOMBA_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ROOMBA_START_BIT_PAUSE_LEN_MAX)\r
+                    {\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = ROOMBA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        ROOMBA_START_BIT_PULSE_LEN_MIN, ROOMBA_START_BIT_PULSE_LEN_MAX,\r
+                                        ROOMBA_START_BIT_PAUSE_LEN_MIN, ROOMBA_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &roomba_param;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_ROOMBA_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_NIKON_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= NIKON_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NIKON_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= NIKON_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NIKON_START_BIT_PAUSE_LEN_MAX)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = NIKON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         NIKON_START_BIT_PULSE_LEN_MIN, NIKON_START_BIT_PULSE_LEN_MAX,\r
                                         NIKON_START_BIT_PAUSE_LEN_MIN, NIKON_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &nikon_param;\r
                     }\r
                     else\r
@@ -1826,9 +2501,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= SAMSUNG_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's SAMSUNG\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = SAMSUNG, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         SAMSUNG_START_BIT_PULSE_LEN_MIN, SAMSUNG_START_BIT_PULSE_LEN_MAX,\r
                                         SAMSUNG_START_BIT_PAUSE_LEN_MIN, SAMSUNG_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &samsung_param;\r
                     }\r
                     else\r
@@ -1838,9 +2515,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= MATSUSHITA_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MATSUSHITA_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= MATSUSHITA_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MATSUSHITA_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's MATSUSHITA\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = MATSUSHITA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         MATSUSHITA_START_BIT_PULSE_LEN_MIN, MATSUSHITA_START_BIT_PULSE_LEN_MAX,\r
                                         MATSUSHITA_START_BIT_PAUSE_LEN_MIN, MATSUSHITA_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &matsushita_param;\r
                     }\r
                     else\r
@@ -1850,21 +2529,39 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= KASEIKYO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= KASEIKYO_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= KASEIKYO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KASEIKYO_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's KASEIKYO\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = KASEIKYO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         KASEIKYO_START_BIT_PULSE_LEN_MIN, KASEIKYO_START_BIT_PULSE_LEN_MAX,\r
                                         KASEIKYO_START_BIT_PAUSE_LEN_MIN, KASEIKYO_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &kaseikyo_param;\r
                     }\r
                     else\r
 #endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1\r
 \r
+#if IRMP_SUPPORT_RADIO1_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= RADIO1_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RADIO1_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= RADIO1_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RADIO1_START_BIT_PAUSE_LEN_MAX)\r
+                    {\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = RADIO1, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        RADIO1_START_BIT_PULSE_LEN_MIN, RADIO1_START_BIT_PULSE_LEN_MAX,\r
+                                        RADIO1_START_BIT_PAUSE_LEN_MIN, RADIO1_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &radio1_param;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_RRADIO1_PROTOCOL == 1\r
+\r
 #if IRMP_SUPPORT_RECS80_PROTOCOL == 1\r
                     if (irmp_pulse_time >= RECS80_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= RECS80_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's RECS80\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = RECS80, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         RECS80_START_BIT_PULSE_LEN_MIN, RECS80_START_BIT_PULSE_LEN_MAX,\r
                                         RECS80_START_BIT_PAUSE_LEN_MIN, RECS80_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &recs80_param;\r
                     }\r
                     else\r
@@ -1880,6 +2577,7 @@ irmp_ISR (void)
                         if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX &&\r
                             irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("protocol = RC5 or FDC\n");\r
                             ANALYZE_PRINTF ("FDC start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                             FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX,\r
@@ -1887,6 +2585,7 @@ irmp_ISR (void)
                             ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                             RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,\r
                                             RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);\r
+#endif // ANALYZE\r
                             memcpy_P (&irmp_param2, &fdc_param, sizeof (IRMP_PARAMETER));\r
                         }\r
                         else\r
@@ -1896,6 +2595,7 @@ irmp_ISR (void)
                         if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX &&\r
                             irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("protocol = RC5 or RCCAR\n");\r
                             ANALYZE_PRINTF ("RCCAR start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                             RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX,\r
@@ -1903,16 +2603,19 @@ irmp_ISR (void)
                             ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                             RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,\r
                                             RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);\r
+#endif // ANALYZE\r
                             memcpy_P (&irmp_param2, &rccar_param, sizeof (IRMP_PARAMETER));\r
                         }\r
                         else\r
 #endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("protocol = RC5, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                             RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,\r
                                             2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX,\r
                                             RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,\r
                                             2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX);\r
+#endif // ANALYZE\r
                         }\r
 \r
                         irmp_param_p = (IRMP_PARAMETER *) &rc5_param;\r
@@ -1937,10 +2640,12 @@ irmp_ISR (void)
                         ((irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX) ||\r
                          (irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX)))\r
                     {                                                           // it's DENON\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = DENON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or %3d - %3d\n",\r
                                         DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX,\r
                                         DENON_1_PAUSE_LEN_MIN, DENON_1_PAUSE_LEN_MAX,\r
                                         DENON_0_PAUSE_LEN_MIN, DENON_0_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &denon_param;\r
                     }\r
                     else\r
@@ -1951,22 +2656,40 @@ irmp_ISR (void)
                         ((irmp_pause_time >= THOMSON_1_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_1_PAUSE_LEN_MAX) ||\r
                          (irmp_pause_time >= THOMSON_0_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_0_PAUSE_LEN_MAX)))\r
                     {                                                           // it's THOMSON\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = THOMSON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or %3d - %3d\n",\r
                                         THOMSON_PULSE_LEN_MIN, THOMSON_PULSE_LEN_MAX,\r
                                         THOMSON_1_PAUSE_LEN_MIN, THOMSON_1_PAUSE_LEN_MAX,\r
                                         THOMSON_0_PAUSE_LEN_MIN, THOMSON_0_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &thomson_param;\r
                     }\r
                     else\r
 #endif // IRMP_SUPPORT_THOMSON_PROTOCOL == 1\r
 \r
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= BOSE_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= BOSE_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= BOSE_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= BOSE_START_BIT_PAUSE_LEN_MAX)\r
+                    {\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = BOSE, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        BOSE_START_BIT_PULSE_LEN_MIN, BOSE_START_BIT_PULSE_LEN_MAX,\r
+                                        BOSE_START_BIT_PAUSE_LEN_MIN, BOSE_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &bose_param;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_BOSE_PROTOCOL == 1\r
+\r
 #if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                     if (irmp_pulse_time >= RC6_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RC6_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= RC6_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RC6_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's RC6\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = RC6, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         RC6_START_BIT_PULSE_LEN_MIN, RC6_START_BIT_PULSE_LEN_MAX,\r
                                         RC6_START_BIT_PAUSE_LEN_MIN, RC6_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &rc6_param;\r
                         last_pause = 0;\r
                         last_value = 1;\r
@@ -1978,9 +2701,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= RECS80EXT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80EXT_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= RECS80EXT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80EXT_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's RECS80EXT\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = RECS80EXT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         RECS80EXT_START_BIT_PULSE_LEN_MIN, RECS80EXT_START_BIT_PULSE_LEN_MAX,\r
                                         RECS80EXT_START_BIT_PAUSE_LEN_MIN, RECS80EXT_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &recs80ext_param;\r
                     }\r
                     else\r
@@ -1990,18 +2715,35 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= NUBERT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NUBERT_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= NUBERT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NUBERT_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's NUBERT\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = NUBERT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         NUBERT_START_BIT_PULSE_LEN_MIN, NUBERT_START_BIT_PULSE_LEN_MAX,\r
                                         NUBERT_START_BIT_PAUSE_LEN_MIN, NUBERT_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &nubert_param;\r
                     }\r
                     else\r
 #endif // IRMP_SUPPORT_NUBERT_PROTOCOL == 1\r
 \r
+#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= SPEAKER_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SPEAKER_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= SPEAKER_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SPEAKER_START_BIT_PAUSE_LEN_MAX)\r
+                    {                                                           // it's SPEAKER\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = SPEAKER, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        SPEAKER_START_BIT_PULSE_LEN_MIN, SPEAKER_START_BIT_PULSE_LEN_MAX,\r
+                                        SPEAKER_START_BIT_PAUSE_LEN_MIN, SPEAKER_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &speaker_param;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_SPEAKER_PROTOCOL == 1\r
+\r
 #if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1\r
                     if (irmp_pulse_time >= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN && irmp_pulse_time <= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX)\r
                     {                                                           // it's BANG_OLUFSEN\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = BANG_OLUFSEN\n");\r
                         ANALYZE_PRINTF ("start bit 1 timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX,\r
@@ -2015,6 +2757,7 @@ irmp_ISR (void)
                         ANALYZE_PRINTF ("start bit 4 timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX,\r
                                         BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &bang_olufsen_param;\r
                         last_value = 0;\r
                     }\r
@@ -2025,9 +2768,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN && irmp_pulse_time <= GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX &&\r
                         irmp_pause_time >= GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN && irmp_pause_time <= GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX)\r
                     {                                                           // it's GRUNDIG\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = GRUNDIG, pre bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN, GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX,\r
                                         GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN, GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &grundig_param;\r
                         last_pause = irmp_pause_time;\r
                         last_value  = 1;\r
@@ -2041,11 +2786,13 @@ irmp_ISR (void)
                         ((irmp_pause_time >= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX) || \r
                          (irmp_pause_time >= 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX)))\r
                     {                                                           // it's RUWIDO or SIEMENS\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = RUWIDO, start bit timings: pulse: %3d - %3d or %3d - %3d, pause: %3d - %3d or %3d - %3d\n",\r
                                         SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN,   SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX,\r
                                         2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX,\r
                                         SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN,   SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX,\r
                                         2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &ruwido_param;\r
                         last_pause = irmp_pause_time;\r
                         last_value  = 1;\r
@@ -2057,9 +2804,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = FDC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX,\r
                                         FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &fdc_param;\r
                     }\r
                     else\r
@@ -2069,9 +2818,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = RCCAR, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX,\r
                                         RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &rccar_param;\r
                     }\r
                     else\r
@@ -2081,9 +2832,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= KATHREIN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= KATHREIN_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= KATHREIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KATHREIN_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's KATHREIN\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = KATHREIN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         KATHREIN_START_BIT_PULSE_LEN_MIN, KATHREIN_START_BIT_PULSE_LEN_MAX,\r
                                         KATHREIN_START_BIT_PAUSE_LEN_MIN, KATHREIN_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &kathrein_param;\r
                     }\r
                     else\r
@@ -2093,9 +2846,11 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= NETBOX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NETBOX_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= NETBOX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NETBOX_START_BIT_PAUSE_LEN_MAX)\r
                     {                                                           // it's NETBOX\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = NETBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         NETBOX_START_BIT_PULSE_LEN_MIN, NETBOX_START_BIT_PULSE_LEN_MAX,\r
                                         NETBOX_START_BIT_PAUSE_LEN_MIN, NETBOX_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &netbox_param;\r
                     }\r
                     else\r
@@ -2105,17 +2860,66 @@ irmp_ISR (void)
                     if (irmp_pulse_time >= LEGO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= LEGO_START_BIT_PULSE_LEN_MAX &&\r
                         irmp_pause_time >= LEGO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= LEGO_START_BIT_PAUSE_LEN_MAX)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = LEGO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
                                         LEGO_START_BIT_PULSE_LEN_MIN, LEGO_START_BIT_PULSE_LEN_MAX,\r
                                         LEGO_START_BIT_PAUSE_LEN_MIN, LEGO_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                         irmp_param_p = (IRMP_PARAMETER *) &lego_param;\r
                     }\r
                     else\r
 #endif // IRMP_SUPPORT_LEGO_PROTOCOL == 1\r
 \r
+#if IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= A1TVBOX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= A1TVBOX_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= A1TVBOX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= A1TVBOX_START_BIT_PAUSE_LEN_MAX)\r
+                    {                                                           // it's A1TVBOX\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = A1TVBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        A1TVBOX_START_BIT_PULSE_LEN_MIN, A1TVBOX_START_BIT_PULSE_LEN_MAX,\r
+                                        A1TVBOX_START_BIT_PAUSE_LEN_MIN, A1TVBOX_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &a1tvbox_param;\r
+                        last_pause = 0;\r
+                        last_value = 1;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= ORTEK_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ORTEK_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= ORTEK_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ORTEK_START_BIT_PAUSE_LEN_MAX)\r
+                    {                                                           // it's ORTEK (Hama)\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = ORTEK, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        ORTEK_START_BIT_PULSE_LEN_MIN, ORTEK_START_BIT_PULSE_LEN_MAX,\r
+                                        ORTEK_START_BIT_PAUSE_LEN_MIN, ORTEK_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &ortek_param;\r
+                        last_pause  = 0;\r
+                        last_value  = 1;\r
+                        parity      = 0;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1\r
+                    if (irmp_pulse_time >= RCMM32_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCMM32_START_BIT_PULSE_LEN_MAX &&\r
+                        irmp_pause_time >= RCMM32_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_START_BIT_PAUSE_LEN_MAX)\r
+                    {                                                           // it's RCMM\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("protocol = RCMM, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+                                        RCMM32_START_BIT_PULSE_LEN_MIN, RCMM32_START_BIT_PULSE_LEN_MAX,\r
+                                        RCMM32_START_BIT_PAUSE_LEN_MIN, RCMM32_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+                        irmp_param_p = (IRMP_PARAMETER *) &rcmm_param;\r
+                    }\r
+                    else\r
+#endif // IRMP_SUPPORT_RCMM_PROTOCOL == 1\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("protocol = UNKNOWN\n");\r
-//                      irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                         irmp_start_bit_detected = 0;                            // wait for another start bit...\r
                     }\r
 \r
@@ -2123,27 +2927,32 @@ irmp_ISR (void)
                     {\r
                         memcpy_P (&irmp_param, irmp_param_p, sizeof (IRMP_PARAMETER));\r
 \r
-#ifdef ANALYZE\r
                         if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max);\r
                             ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max);\r
+#endif // ANALYZE\r
                         }\r
                         else\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("pulse: %3d - %3d or %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max,\r
                                             2 * irmp_param.pulse_1_len_min, 2 * irmp_param.pulse_1_len_max);\r
                             ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max,\r
                                             2 * irmp_param.pause_1_len_min, 2 * irmp_param.pause_1_len_max);\r
+#endif // ANALYZE\r
                         }\r
 \r
 #if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
                         if (irmp_param2.protocol)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param2.pulse_0_len_min, irmp_param2.pulse_0_len_max);\r
                             ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param2.pause_0_len_min, irmp_param2.pause_0_len_max);\r
                             ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param2.pulse_1_len_min, irmp_param2.pulse_1_len_max);\r
                             ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param2.pause_1_len_min, irmp_param2.pause_1_len_max);\r
+#endif // ANALYZE\r
                         }\r
 #endif\r
 \r
@@ -2151,23 +2960,30 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                         if (irmp_param.protocol == IRMP_RC6_PROTOCOL)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("pulse_toggle: %3d - %3d\n", RC6_TOGGLE_BIT_LEN_MIN, RC6_TOGGLE_BIT_LEN_MAX);\r
+#endif // ANALYZE\r
                         }\r
 #endif\r
 \r
                         if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);\r
                             ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max);\r
+#endif // ANALYZE\r
                         }\r
                         else\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("pulse: %3d - %3d or %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max,\r
                                             2 * irmp_param.pulse_0_len_min, 2 * irmp_param.pulse_0_len_max);\r
                             ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max,\r
                                             2 * irmp_param.pause_0_len_min, 2 * irmp_param.pause_0_len_max);\r
+#endif // ANALYZE\r
                         }\r
 \r
+#ifdef ANALYZE\r
 #if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1\r
                         if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL)\r
                         {\r
@@ -2192,17 +3008,20 @@ irmp_ISR (void)
                     {\r
                         if (irmp_pause_time > irmp_param.pulse_1_len_max && irmp_pause_time <= 2 * irmp_param.pulse_1_len_max)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                             ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');\r
                             ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                             irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1);\r
                         }\r
                         else if (! last_value)  // && irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
-\r
                             ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');\r
                             ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                             irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0);\r
                         }\r
                     }\r
@@ -2221,19 +3040,25 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_DENON_PROTOCOL == 1\r
                     if (irmp_param.protocol == IRMP_DENON_PROTOCOL)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
+#endif // ANALYZE\r
 \r
                         if (irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX)\r
                         {                                                       // pause timings correct for "1"?\r
-                          ANALYZE_PUTCHAR ('1');                                  // yes, store 1\r
-                          ANALYZE_NEWLINE ();\r
-                          irmp_store_bit (1);\r
+#ifdef ANALYZE\r
+                            ANALYZE_PUTCHAR ('1');                                  // yes, store 1\r
+                            ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
+                            irmp_store_bit (1);\r
                         }\r
                         else // if (irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX)\r
                         {                                                       // pause timings correct for "0"?\r
-                          ANALYZE_PUTCHAR ('0');                                  // yes, store 0\r
-                          ANALYZE_NEWLINE ();\r
-                          irmp_store_bit (0);\r
+#ifdef ANALYZE\r
+                            ANALYZE_PUTCHAR ('0');                                  // yes, store 0\r
+                            ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
+                            irmp_store_bit (0);\r
                         }\r
                     }\r
                     else\r
@@ -2241,18 +3066,24 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_THOMSON_PROTOCOL == 1\r
                     if (irmp_param.protocol == IRMP_THOMSON_PROTOCOL)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
+#endif // ANALYZE\r
 \r
                         if (irmp_pause_time >= THOMSON_1_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_1_PAUSE_LEN_MAX)\r
                         {                                                       // pause timings correct for "1"?\r
+#ifdef ANALYZE\r
                           ANALYZE_PUTCHAR ('1');                                  // yes, store 1\r
                           ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                           irmp_store_bit (1);\r
                         }\r
                         else // if (irmp_pause_time >= THOMSON_0_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_0_PAUSE_LEN_MAX)\r
                         {                                                       // pause timings correct for "0"?\r
+#ifdef ANALYZE\r
                           ANALYZE_PUTCHAR ('0');                                  // yes, store 0\r
                           ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                           irmp_store_bit (0);\r
                         }\r
                     }\r
@@ -2289,15 +3120,15 @@ irmp_ISR (void)
                             {\r
                                 ANALYZE_PRINTF ("stop bit detected\n");\r
                             }\r
-#endif\r
+#endif // ANALYZE\r
                             irmp_param.stop_bit = 0;\r
                         }\r
                         else\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("error: stop bit timing wrong, irmp_bit = %d, irmp_pulse_time = %d, pulse_0_len_min = %d, pulse_0_len_max = %d\n",\r
                                             irmp_bit, irmp_pulse_time, irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);\r
-\r
-//                          irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                             irmp_start_bit_detected = 0;                        // wait for another start bit...\r
                             irmp_pulse_time         = 0;\r
                             irmp_pause_time         = 0;\r
@@ -2334,7 +3165,9 @@ irmp_ISR (void)
                         {\r
                             if (irmp_pause_time > IR60_TIMEOUT_LEN && (irmp_bit == 5 || irmp_bit == 6))\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to IR60 protocol\n");\r
+#endif // ANALYZE\r
                                 got_light = TRUE;                                       // this is a lie, but generates a stop bit ;-)\r
                                 irmp_param.stop_bit = TRUE;                             // set flag\r
 \r
@@ -2356,7 +3189,9 @@ irmp_ISR (void)
                             }\r
                             else if (irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to NOKIA protocol\n");\r
+#endif // ANALYZE\r
                                 irmp_param.protocol         = IRMP_NOKIA_PROTOCOL;      // change protocol\r
                                 irmp_param.address_offset   = NOKIA_ADDRESS_OFFSET;\r
                                 irmp_param.address_end      = NOKIA_ADDRESS_OFFSET + NOKIA_ADDRESS_LEN;\r
@@ -2383,7 +3218,9 @@ irmp_ISR (void)
                             }\r
                             else if (irmp_bit >= RUWIDO_COMPLETE_DATA_LEN)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to SIEMENS protocol\n");\r
+#endif // ANALYZE\r
                                 irmp_param.protocol         = IRMP_SIEMENS_PROTOCOL;    // change protocol\r
                                 irmp_param.address_offset   = SIEMENS_ADDRESS_OFFSET;\r
                                 irmp_param.address_end      = SIEMENS_ADDRESS_OFFSET + SIEMENS_ADDRESS_LEN;\r
@@ -2396,12 +3233,29 @@ irmp_ISR (void)
                                 irmp_tmp_address <<= 2;\r
                                 irmp_tmp_address |= (irmp_tmp_command >> 6);\r
                                 irmp_tmp_command &= 0x003F;\r
-                                irmp_tmp_command <<= 4;\r
+//                              irmp_tmp_command <<= 4;\r
                                 irmp_tmp_command |= last_value;\r
                             }\r
                         }\r
                         else\r
 #endif\r
+#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1\r
+                        if (irmp_param.protocol == IRMP_ROOMBA_PROTOCOL &&                          // Roomba has no stop bit\r
+                            irmp_bit >= ROOMBA_COMPLETE_DATA_LEN - 1)                               // it's the last data bit...\r
+                        {                                                                           // break and close this frame\r
+                            if (irmp_pulse_time >= ROOMBA_1_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_1_PULSE_LEN_MAX)\r
+                            {\r
+                                irmp_pause_time = ROOMBA_1_PAUSE_LEN_EXACT;\r
+                            }\r
+                            else if (irmp_pulse_time >= ROOMBA_0_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_0_PULSE_LEN_MAX)\r
+                            {\r
+                                irmp_pause_time = ROOMBA_0_PAUSE_LEN;\r
+                            }\r
+\r
+                            got_light = TRUE;                                                       // this is a lie, but helps (generates stop bit)\r
+                        }\r
+                        else\r
+#endif\r
 #if IRMP_SUPPORT_MANCHESTER == 1\r
                         if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) &&\r
                             irmp_pause_time >= 2 * irmp_param.pause_1_len_max && irmp_bit >= irmp_param.complete_len - 2 && !irmp_param.stop_bit)\r
@@ -2420,7 +3274,9 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_JVC_PROTOCOL == 1\r
                             else if (irmp_param.protocol == IRMP_NEC_PROTOCOL && (irmp_bit == 16 || irmp_bit == 17))      // it was a JVC stop bit\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);\r
+#endif // ANALYZE\r
                                 irmp_param.stop_bit     = TRUE;                                     // set flag\r
                                 irmp_param.protocol     = IRMP_JVC_PROTOCOL;                        // switch protocol\r
                                 irmp_param.complete_len = irmp_bit;                                 // patch length: 16 or 17\r
@@ -2429,12 +3285,28 @@ irmp_ISR (void)
                                 irmp_start_bit_detected = 1;                                        // tricky: don't wait for another start bit...\r
                             }\r
 #endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
+                            else if (irmp_param.protocol == IRMP_NEC_PROTOCOL && (irmp_bit == 28 || irmp_bit == 29))      // it was a LGAIR stop bit\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("Switching to LGAIR protocol, irmp_bit = %d\n", irmp_bit);\r
+#endif // ANALYZE\r
+                                irmp_param.stop_bit     = TRUE;                                     // set flag\r
+                                irmp_param.protocol     = IRMP_LGAIR_PROTOCOL;                      // switch protocol\r
+                                irmp_param.complete_len = irmp_bit;                                 // patch length: 16 or 17\r
+                                irmp_tmp_command        = irmp_lgair_command;                       // set command: upper 8 bits are command bits\r
+                                irmp_tmp_address        = irmp_lgair_address;                       // lower 4 bits are address bits\r
+                                irmp_start_bit_detected = 1;                                        // tricky: don't wait for another start bit...\r
+                            }\r
+#endif // IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
 \r
 #if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
 #if IRMP_SUPPORT_NEC_PROTOCOL == 1\r
-                            else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 32)  // it was a NEC stop bit\r
+                            else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 32)      // it was a NEC stop bit\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to NEC protocol\n");\r
+#endif // ANALYZE\r
                                 irmp_param.stop_bit     = TRUE;                                     // set flag\r
                                 irmp_param.protocol     = IRMP_NEC_PROTOCOL;                        // switch protocol\r
                                 irmp_param.complete_len = irmp_bit;                                 // patch length: 16 or 17\r
@@ -2446,10 +3318,25 @@ irmp_ISR (void)
                                 irmp_tmp_command        = (irmp_tmp_address2 >> 3) | (irmp_tmp_command << 10);\r
                             }\r
 #endif // IRMP_SUPPORT_NEC_PROTOCOL == 1\r
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
+                            else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 28)      // it was a NEC stop bit\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("Switching to LGAIR protocol\n");\r
+#endif // ANALYZE\r
+                                irmp_param.stop_bit     = TRUE;                                     // set flag\r
+                                irmp_param.protocol     = IRMP_LGAIR_PROTOCOL;                      // switch protocol\r
+                                irmp_param.complete_len = irmp_bit;                                 // patch length: 16 or 17\r
+                                irmp_tmp_address        = irmp_lgair_address;\r
+                                irmp_tmp_command        = irmp_lgair_command;\r
+                            }\r
+#endif // IRMP_SUPPORT_LGAIR_PROTOCOL == 1\r
 #if IRMP_SUPPORT_JVC_PROTOCOL == 1\r
                             else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && (irmp_bit == 16 || irmp_bit == 17))  // it was a JVC stop bit\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);\r
+#endif // ANALYZE\r
                                 irmp_param.stop_bit     = TRUE;                                     // set flag\r
                                 irmp_param.protocol     = IRMP_JVC_PROTOCOL;                        // switch protocol\r
                                 irmp_param.complete_len = irmp_bit;                                 // patch length: 16 or 17\r
@@ -2462,12 +3349,50 @@ irmp_ISR (void)
                             }\r
 #endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
 #endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+                            else if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit == 32)          // it was a SAMSUNG32 stop bit\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol\n");\r
+#endif // ANALYZE\r
+                                irmp_param.protocol         = IRMP_SAMSUNG32_PROTOCOL;\r
+                                irmp_param.command_offset   = SAMSUNG32_COMMAND_OFFSET;\r
+                                irmp_param.command_end      = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;\r
+                                irmp_param.complete_len     = SAMSUNG32_COMPLETE_DATA_LEN;\r
+                            }\r
+#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1\r
+                            else if (irmp_param.protocol == IRMP_RCMM32_PROTOCOL && (irmp_bit == 12 || irmp_bit == 24))  // it was a RCMM stop bit\r
+                            {\r
+                                if (irmp_bit == 12)\r
+                                {\r
+                                    irmp_tmp_command = (irmp_tmp_address & 0xFF);                   // set command: lower 8 bits are command bits\r
+                                    irmp_tmp_address >>= 8;                                         // upper 4 bits are address bits\r
+\r
+#ifdef ANALYZE\r
+                                    ANALYZE_PRINTF ("Switching to RCMM12 protocol, irmp_bit = %d\n", irmp_bit);\r
+#endif // ANALYZE\r
+                                    irmp_param.protocol     = IRMP_RCMM12_PROTOCOL;                 // switch protocol\r
+                                }\r
+                                else // if ((irmp_bit == 24)\r
+                                {\r
+#ifdef ANALYZE\r
+                                    ANALYZE_PRINTF ("Switching to RCMM24 protocol, irmp_bit = %d\n", irmp_bit);\r
+#endif // ANALYZE\r
+                                    irmp_param.protocol     = IRMP_RCMM24_PROTOCOL;                 // switch protocol\r
+                                }\r
+                                irmp_param.stop_bit     = TRUE;                                     // set flag\r
+                                irmp_param.complete_len = irmp_bit;                                 // patch length\r
+                            }\r
+#endif // IRMP_SUPPORT_RCMM_PROTOCOL == 1\r
                             else\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("error 2: pause %d after data bit %d too long\n", irmp_pause_time, irmp_bit);\r
                                 ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-\r
-//                              irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                                 irmp_start_bit_detected = 0;                    // wait for another start bit...\r
                                 irmp_pulse_time         = 0;\r
                                 irmp_pause_time         = 0;\r
@@ -2482,7 +3407,9 @@ irmp_ISR (void)
 \r
                 if (got_light)\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
+#endif // ANALYZE\r
 \r
 #if IRMP_SUPPORT_MANCHESTER == 1\r
                     if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))                                     // Manchester\r
@@ -2497,7 +3424,9 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                             if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN)         // RC6 toggle bit\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PUTCHAR ('T');\r
+#endif // ANALYZE\r
                                 if (irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG)                      // RC6 mode 6A\r
                                 {\r
                                     irmp_store_bit (1);\r
@@ -2508,18 +3437,24 @@ irmp_ISR (void)
                                     irmp_store_bit (0);\r
                                     last_value = 0;\r
                                 }\r
+#ifdef ANALYZE\r
                                 ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                             }\r
                             else\r
 #endif // IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');\r
+#endif // ANALYZE\r
                                 irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0  :  1 );\r
 \r
 #if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                                 if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN)      // RC6 toggle bit\r
                                 {\r
+#ifdef ANALYZE\r
                                     ANALYZE_PUTCHAR ('T');\r
+#endif // ANALYZE\r
                                     irmp_store_bit (1);\r
 \r
                                     if (irmp_pause_time > 2 * irmp_param.pause_1_len_max)\r
@@ -2530,18 +3465,24 @@ irmp_ISR (void)
                                     {\r
                                         last_value = 1;\r
                                     }\r
+#ifdef ANALYZE\r
                                     ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                                 }\r
                                 else\r
 #endif // IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                                 {\r
+#ifdef ANALYZE\r
                                     ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');\r
+#endif // ANALYZE\r
                                     irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 :   0 );\r
 #if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
                                     if (! irmp_param2.protocol)\r
 #endif\r
                                     {\r
+#ifdef ANALYZE\r
                                         ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                                     }\r
                                     last_value = (irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0;\r
                                 }\r
@@ -2562,19 +3503,25 @@ irmp_ISR (void)
                                 manchester_value = last_value;\r
                             }\r
 \r
+#ifdef ANALYZE\r
                             ANALYZE_PUTCHAR (manchester_value + '0');\r
+#endif // ANALYZE\r
 \r
 #if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
                             if (! irmp_param2.protocol)\r
 #endif\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                             }\r
 \r
 #if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                             if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 1 && manchester_value == 1)     // RC6 mode != 0 ???\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to RC6A protocol\n");\r
+#endif // ANALYZE\r
                                 irmp_param.complete_len = RC6_COMPLETE_DATA_LEN_LONG;\r
                                 irmp_param.address_offset = 5;\r
                                 irmp_param.address_end = irmp_param.address_offset + 15;\r
@@ -2594,7 +3541,9 @@ irmp_ISR (void)
                                 ((irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX) ||\r
                                  (irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX)))\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PUTCHAR ('?');\r
+#endif // ANALYZE\r
                                 irmp_param.protocol = 0;                // switch to FDC, see below\r
                             }\r
                             else\r
@@ -2605,17 +3554,20 @@ irmp_ISR (void)
                                 ((irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX) ||\r
                                  (irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX)))\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PUTCHAR ('?');\r
+#endif // ANALYZE\r
                                 irmp_param.protocol = 0;                // switch to RCCAR, see below\r
                             }\r
                             else\r
 #endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PUTCHAR ('?');\r
                                 ANALYZE_NEWLINE ();\r
                                 ANALYZE_PRINTF ("error 3 manchester: timing not correct: data bit %d,  pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                                 ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-//                              irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                                 irmp_start_bit_detected = 0;                            // reset flags and wait for next start bit\r
                                 irmp_pause_time         = 0;\r
                             }\r
@@ -2626,18 +3578,24 @@ irmp_ISR (void)
                         {\r
                             if (irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("   1 (FDC)\n");\r
+#endif // ANALYZE\r
                                 irmp_store_bit2 (1);\r
                             }\r
                             else if (irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("   0 (FDC)\n");\r
+#endif // ANALYZE\r
                                 irmp_store_bit2 (0);\r
                             }\r
 \r
                             if (! irmp_param.protocol)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to FDC protocol\n");\r
+#endif // ANALYZE\r
                                 memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));\r
                                 irmp_param2.protocol = 0;\r
                                 irmp_tmp_address = irmp_tmp_address2;\r
@@ -2650,18 +3608,24 @@ irmp_ISR (void)
                         {\r
                             if (irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("   1 (RCCAR)\n");\r
+#endif // ANALYZE\r
                                 irmp_store_bit2 (1);\r
                             }\r
                             else if (irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("   0 (RCCAR)\n");\r
+#endif // ANALYZE\r
                                 irmp_store_bit2 (0);\r
                             }\r
 \r
                             if (! irmp_param.protocol)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PRINTF ("Switching to RCCAR protocol\n");\r
+#endif // ANALYZE\r
                                 memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));\r
                                 irmp_param2.protocol = 0;\r
                                 irmp_tmp_address = irmp_tmp_address2;\r
@@ -2681,7 +3645,9 @@ irmp_ISR (void)
                     {\r
                         while (irmp_bit < irmp_param.complete_len && irmp_pulse_time > irmp_param.pulse_1_len_max)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PUTCHAR ('1');\r
+#endif // ANALYZE\r
                             irmp_store_bit (1);\r
 \r
                             if (irmp_pulse_time >= irmp_param.pulse_1_len_min)\r
@@ -2696,7 +3662,9 @@ irmp_ISR (void)
 \r
                         while (irmp_bit < irmp_param.complete_len && irmp_pause_time > irmp_param.pause_1_len_max)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PUTCHAR ('0');\r
+#endif // ANALYZE\r
                             irmp_store_bit (0);\r
 \r
                             if (irmp_pause_time >= irmp_param.pause_1_len_min)\r
@@ -2708,7 +3676,9 @@ irmp_ISR (void)
                                 irmp_pause_time = 0;\r
                             }\r
                         }\r
+#ifdef ANALYZE\r
                         ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                         wait_for_space = 0;\r
                     }\r
                     else\r
@@ -2720,40 +3690,56 @@ irmp_ISR (void)
                         if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX &&\r
                             irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX)\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("SYNC\n");\r
+#endif // ANALYZE\r
                             wait_for_space = 0;\r
-                            irmp_tmp_id = 0;\r
                             irmp_bit++;\r
                         }\r
                         else  if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX)\r
                         {\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+#ifdef ANALYZE\r
+                            ANALYZE_PRINTF ("Switching to SAMSUNG48 protocol ");\r
+#endif // ANALYZE\r
+                            irmp_param.protocol         = IRMP_SAMSUNG48_PROTOCOL;\r
+                            irmp_param.command_offset   = SAMSUNG48_COMMAND_OFFSET;\r
+                            irmp_param.command_end      = SAMSUNG48_COMMAND_OFFSET + SAMSUNG48_COMMAND_LEN;\r
+                            irmp_param.complete_len     = SAMSUNG48_COMPLETE_DATA_LEN;\r
+#else\r
+#ifdef ANALYZE\r
+                            ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol ");\r
+#endif // ANALYZE\r
                             irmp_param.protocol         = IRMP_SAMSUNG32_PROTOCOL;\r
                             irmp_param.command_offset   = SAMSUNG32_COMMAND_OFFSET;\r
                             irmp_param.command_end      = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;\r
                             irmp_param.complete_len     = SAMSUNG32_COMPLETE_DATA_LEN;\r
-\r
+#endif\r
                             if (irmp_pause_time >= SAMSUNG_1_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_1_PAUSE_LEN_MAX)\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PUTCHAR ('1');\r
                                 ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                                 irmp_store_bit (1);\r
                                 wait_for_space = 0;\r
                             }\r
                             else\r
                             {\r
+#ifdef ANALYZE\r
                                 ANALYZE_PUTCHAR ('0');\r
                                 ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                                 irmp_store_bit (0);\r
                                 wait_for_space = 0;\r
                             }\r
-\r
-                            ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol\n");\r
                         }\r
                         else\r
                         {                                                           // timing incorrect!\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("error 3 Samsung: timing not correct: data bit %d,  pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                             ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-//                          irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                             irmp_start_bit_detected = 0;                            // reset flags and wait for next start bit\r
                             irmp_pause_time         = 0;\r
                         }\r
@@ -2769,7 +3755,9 @@ irmp_ISR (void)
 #endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
                         irmp_bit == 8 && irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)\r
                     {\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("Switching to NEC16 protocol\n");\r
+#endif // ANALYZE\r
                         irmp_param.protocol         = IRMP_NEC16_PROTOCOL;\r
                         irmp_param.address_offset   = NEC16_ADDRESS_OFFSET;\r
                         irmp_param.address_end      = NEC16_ADDRESS_OFFSET + NEC16_ADDRESS_LEN;\r
@@ -2790,15 +3778,18 @@ irmp_ISR (void)
                             {\r
                                 if (irmp_pause_time >= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX)\r
                                 {\r
+#ifdef ANALYZE\r
                                     ANALYZE_PRINTF ("3rd start bit\n");\r
+#endif // ANALYZE\r
                                     wait_for_space = 0;\r
                                     irmp_bit++;\r
                                 }\r
                                 else\r
                                 {                                                   // timing incorrect!\r
+#ifdef ANALYZE\r
                                     ANALYZE_PRINTF ("error 3a B&O: timing not correct: data bit %d,  pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                                     ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-//                                  irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                                     irmp_start_bit_detected = 0;                    // reset flags and wait for next start bit\r
                                     irmp_pause_time         = 0;\r
                                 }\r
@@ -2807,15 +3798,18 @@ irmp_ISR (void)
                             {\r
                                 if (irmp_pause_time >= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MAX)\r
                                 {\r
+#ifdef ANALYZE\r
                                     ANALYZE_PRINTF ("trailer bit\n");\r
+#endif // ANALYZE\r
                                     wait_for_space = 0;\r
                                     irmp_bit++;\r
                                 }\r
                                 else\r
                                 {                                                   // timing incorrect!\r
+#ifdef ANALYZE\r
                                     ANALYZE_PRINTF ("error 3b B&O: timing not correct: data bit %d,  pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                                     ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-//                                  irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                                     irmp_start_bit_detected = 0;                    // reset flags and wait for next start bit\r
                                     irmp_pause_time         = 0;\r
                                 }\r
@@ -2824,32 +3818,39 @@ irmp_ISR (void)
                             {\r
                                 if (irmp_pause_time >= BANG_OLUFSEN_1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_1_PAUSE_LEN_MAX)\r
                                 {                                                   // pulse & pause timings correct for "1"?\r
+#ifdef ANALYZE\r
                                     ANALYZE_PUTCHAR ('1');\r
                                     ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                                     irmp_store_bit (1);\r
                                     last_value = 1;\r
                                     wait_for_space = 0;\r
                                 }\r
                                 else if (irmp_pause_time >= BANG_OLUFSEN_0_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_0_PAUSE_LEN_MAX)\r
                                 {                                                   // pulse & pause timings correct for "0"?\r
+#ifdef ANALYZE\r
                                     ANALYZE_PUTCHAR ('0');\r
                                     ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                                     irmp_store_bit (0);\r
                                     last_value = 0;\r
                                     wait_for_space = 0;\r
                                 }\r
                                 else if (irmp_pause_time >= BANG_OLUFSEN_R_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_R_PAUSE_LEN_MAX)\r
                                 {\r
+#ifdef ANALYZE\r
                                     ANALYZE_PUTCHAR (last_value + '0');\r
                                     ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                                     irmp_store_bit (last_value);\r
                                     wait_for_space = 0;\r
                                 }\r
                                 else\r
                                 {                                                   // timing incorrect!\r
+#ifdef ANALYZE\r
                                     ANALYZE_PRINTF ("error 3c B&O: timing not correct: data bit %d,  pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                                     ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-//                                  irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                                     irmp_start_bit_detected = 0;                    // reset flags and wait for next start bit\r
                                     irmp_pause_time         = 0;\r
                                 }\r
@@ -2857,9 +3858,10 @@ irmp_ISR (void)
                         }\r
                         else\r
                         {                                                           // timing incorrect!\r
+#ifdef ANALYZE\r
                             ANALYZE_PRINTF ("error 3d B&O: timing not correct: data bit %d,  pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                             ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-//                          irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                             irmp_start_bit_detected = 0;                            // reset flags and wait for next start bit\r
                             irmp_pause_time         = 0;\r
                         }\r
@@ -2867,19 +3869,70 @@ irmp_ISR (void)
                     else\r
 #endif // IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL\r
 \r
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1\r
+                    if (irmp_param.protocol == IRMP_RCMM32_PROTOCOL)\r
+                    {\r
+                        if (irmp_pause_time >= RCMM32_BIT_00_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_00_PAUSE_LEN_MAX)\r
+                        {\r
+#ifdef ANALYZE\r
+                            ANALYZE_PUTCHAR ('0');\r
+                            ANALYZE_PUTCHAR ('0');\r
+#endif // ANALYZE\r
+                            irmp_store_bit (0);\r
+                            irmp_store_bit (0);\r
+                        }\r
+                        else if (irmp_pause_time >= RCMM32_BIT_01_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_01_PAUSE_LEN_MAX)\r
+                        {\r
+#ifdef ANALYZE\r
+                            ANALYZE_PUTCHAR ('0');\r
+                            ANALYZE_PUTCHAR ('1');\r
+#endif // ANALYZE\r
+                            irmp_store_bit (0);\r
+                            irmp_store_bit (1);\r
+                        }\r
+                        else if (irmp_pause_time >= RCMM32_BIT_10_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_10_PAUSE_LEN_MAX)\r
+                        {\r
+#ifdef ANALYZE\r
+                            ANALYZE_PUTCHAR ('1');\r
+                            ANALYZE_PUTCHAR ('0');\r
+#endif // ANALYZE\r
+                            irmp_store_bit (1);\r
+                            irmp_store_bit (0);\r
+                        }\r
+                        else if (irmp_pause_time >= RCMM32_BIT_11_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_11_PAUSE_LEN_MAX)\r
+                        {\r
+#ifdef ANALYZE\r
+                            ANALYZE_PUTCHAR ('1');\r
+                            ANALYZE_PUTCHAR ('1');\r
+#endif // ANALYZE\r
+                            irmp_store_bit (1);\r
+                            irmp_store_bit (1);\r
+                        }\r
+#ifdef ANALYZE\r
+                        ANALYZE_PRINTF ("\n");\r
+#endif // ANALYZE\r
+                        wait_for_space = 0;\r
+                    }\r
+                    else\r
+#endif\r
\r
                     if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max &&\r
                         irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max)\r
                     {                                                               // pulse & pause timings correct for "1"?\r
+#ifdef ANALYZE\r
                         ANALYZE_PUTCHAR ('1');\r
                         ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                         irmp_store_bit (1);\r
                         wait_for_space = 0;\r
                     }\r
                     else if (irmp_pulse_time >= irmp_param.pulse_0_len_min && irmp_pulse_time <= irmp_param.pulse_0_len_max &&\r
                              irmp_pause_time >= irmp_param.pause_0_len_min && irmp_pause_time <= irmp_param.pause_0_len_max)\r
                     {                                                               // pulse & pause timings correct for "0"?\r
+#ifdef ANALYZE\r
                         ANALYZE_PUTCHAR ('0');\r
                         ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                         irmp_store_bit (0);\r
                         wait_for_space = 0;\r
                     }\r
@@ -2897,14 +3950,18 @@ irmp_ISR (void)
                         if (irmp_bit == 8)\r
                         {\r
                             irmp_bit++;\r
+#ifdef ANALYZE\r
                             ANALYZE_PUTCHAR ('S');\r
                             ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                             irmp_tmp_command <<= 1;\r
                         }\r
                         else\r
                         {\r
+#ifdef ANALYZE\r
                             ANALYZE_PUTCHAR ('S');\r
                             ANALYZE_NEWLINE ();\r
+#endif // ANALYZE\r
                             irmp_store_bit (1);\r
                         }\r
                         wait_for_space = 0;\r
@@ -2912,9 +3969,10 @@ irmp_ISR (void)
                     else\r
 #endif // IRMP_SUPPORT_KATHREIN_PROTOCOL\r
                     {                                                               // timing incorrect!\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("error 3: timing not correct: data bit %d,  pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
                         ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-//                      irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
                         irmp_start_bit_detected = 0;                                // reset flags and wait for next start bit\r
                         irmp_pause_time         = 0;\r
                     }\r
@@ -2937,7 +3995,7 @@ irmp_ISR (void)
 \r
             if (irmp_start_bit_detected && irmp_bit == irmp_param.complete_len && irmp_param.stop_bit == 0)    // enough bits received?\r
             {\r
-                if (last_irmp_command == irmp_tmp_command && repetition_len < AUTO_FRAME_REPETITION_LEN)\r
+                if (last_irmp_command == irmp_tmp_command && key_repetition_len < AUTO_FRAME_REPETITION_LEN)\r
                 {\r
                     repetition_frame_number++;\r
                 }\r
@@ -2950,9 +4008,24 @@ irmp_ISR (void)
                 // if SIRCS protocol and the code will be repeated within 50 ms, we will ignore 2nd and 3rd repetition frame\r
                 if (irmp_param.protocol == IRMP_SIRCS_PROTOCOL && (repetition_frame_number == 1 || repetition_frame_number == 2))\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("code skipped: SIRCS auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
-                                    repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-                    repetition_len = 0;\r
+                                    repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
+#endif // ANALYZE\r
+                    key_repetition_len = 0;\r
+                }\r
+                else\r
+#endif\r
+\r
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+                // if ORTEK protocol and the code will be repeated within 50 ms, we will ignore 2nd repetition frame\r
+                if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL && repetition_frame_number == 1)\r
+                {\r
+#ifdef ANALYZE\r
+                    ANALYZE_PRINTF ("code skipped: ORTEK auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
+                                    repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
+#endif // ANALYZE\r
+                    key_repetition_len = 0;\r
                 }\r
                 else\r
 #endif\r
@@ -2961,20 +4034,24 @@ irmp_ISR (void)
                 // if KASEIKYO protocol and the code will be repeated within 50 ms, we will ignore 2nd repetition frame\r
                 if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL && repetition_frame_number == 1)\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("code skipped: KASEIKYO auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
-                                    repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-                    repetition_len = 0;\r
+                                    repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
+#endif // ANALYZE\r
+                    key_repetition_len = 0;\r
                 }\r
                 else\r
 #endif\r
 \r
 #if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
-                // if SAMSUNG32 protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame\r
-                if (irmp_param.protocol == IRMP_SAMSUNG32_PROTOCOL && (repetition_frame_number & 0x01))\r
+                // if SAMSUNG32 or SAMSUNG48 protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame\r
+                if ((irmp_param.protocol == IRMP_SAMSUNG32_PROTOCOL || irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL) && (repetition_frame_number & 0x01))\r
                 {\r
-                    ANALYZE_PRINTF ("code skipped: SAMSUNG32 auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
-                                    repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-                    repetition_len = 0;\r
+#ifdef ANALYZE\r
+                    ANALYZE_PRINTF ("code skipped: SAMSUNG32/SAMSUNG48 auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
+                                    repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
+#endif // ANALYZE\r
+                    key_repetition_len = 0;\r
                 }\r
                 else\r
 #endif\r
@@ -2983,15 +4060,32 @@ irmp_ISR (void)
                 // if NUBERT protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame\r
                 if (irmp_param.protocol == IRMP_NUBERT_PROTOCOL && (repetition_frame_number & 0x01))\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("code skipped: NUBERT auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
-                                    repetition_frame_number + 1, repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-                    repetition_len = 0;\r
+                                    repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
+#endif // ANALYZE\r
+                    key_repetition_len = 0;\r
                 }\r
                 else\r
 #endif\r
 \r
+#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1\r
+                // if SPEAKER protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame\r
+                if (irmp_param.protocol == IRMP_SPEAKER_PROTOCOL && (repetition_frame_number & 0x01))\r
                 {\r
+#ifdef ANALYZE\r
+                    ANALYZE_PRINTF ("code skipped: SPEAKER auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
+                                    repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
+#endif // ANALYZE\r
+                    key_repetition_len = 0;\r
+                }\r
+                else\r
+#endif\r
+\r
+                {\r
+#ifdef ANALYZE\r
                     ANALYZE_PRINTF ("%8.3fms code detected, length = %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit);\r
+#endif // ANALYZE\r
                     irmp_ir_detected = TRUE;\r
 \r
 #if IRMP_SUPPORT_DENON_PROTOCOL == 1\r
@@ -3004,14 +4098,27 @@ irmp_ISR (void)
 \r
                             irmp_protocol = irmp_param.protocol;                    // store protocol\r
                             irmp_address = irmp_tmp_address;                        // store address\r
-                            irmp_command = irmp_tmp_command ;                       // store command\r
+                            irmp_command = irmp_tmp_command                       // store command\r
                         }\r
                         else\r
                         {\r
-                            ANALYZE_PRINTF ("%8.3fms waiting for inverted command repetition\n", (double) (time_counter * 1000) / F_INTERRUPTS);\r
-                            irmp_ir_detected = FALSE;\r
-                            last_irmp_denon_command = irmp_tmp_command;\r
-                            repetition_len = 0;\r
+                            if ((irmp_tmp_command & 0x01) == 0x00)\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("%8.3fms info Denon: waiting for inverted command repetition\n", (double) (time_counter * 1000) / F_INTERRUPTS);\r
+#endif // ANALYZE\r
+                                last_irmp_denon_command = irmp_tmp_command;\r
+                                denon_repetition_len = 0;\r
+                                irmp_ir_detected = FALSE;\r
+                            }\r
+                            else\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("%8.3fms warning Denon: got unexpected inverted command, ignoring it\n", (double) (time_counter * 1000) / F_INTERRUPTS);\r
+#endif // ANALYZE\r
+                                last_irmp_denon_command = 0;\r
+                                irmp_ir_detected = FALSE;\r
+                            }\r
                         }\r
                     }\r
                     else\r
@@ -3020,7 +4127,9 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_GRUNDIG_PROTOCOL == 1\r
                     if (irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL && irmp_tmp_command == 0x01ff)\r
                     {                                                               // Grundig start frame?\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("Detected GRUNDIG start frame, ignoring it\n");\r
+#endif // ANALYZE\r
                         irmp_ir_detected = FALSE;\r
                     }\r
                     else\r
@@ -3029,7 +4138,9 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_NOKIA_PROTOCOL == 1\r
                     if (irmp_param.protocol == IRMP_NOKIA_PROTOCOL && irmp_tmp_address == 0x00ff && irmp_tmp_command == 0x00fe)\r
                     {                                                               // Nokia start frame?\r
+#ifdef ANALYZE\r
                         ANALYZE_PRINTF ("Detected NOKIA start frame, ignoring it\n");\r
+#endif // ANALYZE\r
                         irmp_ir_detected = FALSE;\r
                     }\r
                     else\r
@@ -3038,18 +4149,23 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_NEC_PROTOCOL == 1\r
                         if (irmp_param.protocol == IRMP_NEC_PROTOCOL && irmp_bit == 0)  // repetition frame\r
                         {\r
-                            if (repetition_len < NEC_FRAME_REPEAT_PAUSE_LEN_MAX)\r
+                            if (key_repetition_len < NEC_FRAME_REPEAT_PAUSE_LEN_MAX)\r
                             {\r
-                                ANALYZE_PRINTF ("Detected NEC repetition frame, repetition_len = %d\n", repetition_len);\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("Detected NEC repetition frame, key_repetition_len = %d\n", key_repetition_len);\r
+                                ANALYZE_ONLY_NORMAL_PRINTF("REPETETION FRAME                ");\r
+#endif // ANALYZE\r
                                 irmp_tmp_address = last_irmp_address;                   // address is last address\r
                                 irmp_tmp_command = last_irmp_command;                   // command is last command\r
                                 irmp_flags |= IRMP_FLAG_REPETITION;\r
-                                repetition_len = 0;\r
+                                key_repetition_len = 0;\r
                             }\r
                             else\r
                             {\r
-                                ANALYZE_PRINTF ("Detected NEC repetition frame, ignoring it: timeout occured, repetition_len = %d > %d\n",\r
-                                                repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX);\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("Detected NEC repetition frame, ignoring it: timeout occured, key_repetition_len = %d > %d\n",\r
+                                                key_repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
                                 irmp_ir_detected = FALSE;\r
                             }\r
                         }\r
@@ -3058,23 +4174,25 @@ irmp_ISR (void)
 #if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1\r
                         if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL)\r
                         {\r
-                            uint8_t xor;\r
-                            // ANALYZE_PRINTF ("0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",\r
-                            //                 xor_check[0], xor_check[1], xor_check[2], xor_check[3], xor_check[4], xor_check[5]);\r
+                            uint8_t xor_value;\r
 \r
-                            xor = (xor_check[0] & 0x0F) ^ ((xor_check[0] & 0xF0) >> 4) ^ (xor_check[1] & 0x0F) ^ ((xor_check[1] & 0xF0) >> 4);\r
+                            xor_value = (xor_check[0] & 0x0F) ^ ((xor_check[0] & 0xF0) >> 4) ^ (xor_check[1] & 0x0F) ^ ((xor_check[1] & 0xF0) >> 4);\r
 \r
-                            if (xor != (xor_check[2] & 0x0F))\r
+                            if (xor_value != (xor_check[2] & 0x0F))\r
                             {\r
-                                ANALYZE_PRINTF ("error 4: wrong XOR check for customer id: 0x%1x 0x%1x\n", xor, xor_check[2] & 0x0F);\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("error 4: wrong XOR check for customer id: 0x%1x 0x%1x\n", xor_value, xor_check[2] & 0x0F);\r
+#endif // ANALYZE\r
                                 irmp_ir_detected = FALSE;\r
                             }\r
 \r
-                            xor = xor_check[2] ^ xor_check[3] ^ xor_check[4];\r
+                            xor_value = xor_check[2] ^ xor_check[3] ^ xor_check[4];\r
 \r
-                            if (xor != xor_check[5])\r
+                            if (xor_value != xor_check[5])\r
                             {\r
-                                ANALYZE_PRINTF ("error 5: wrong XOR check for data bits: 0x%02x 0x%02x\n", xor, xor_check[5]);\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("error 5: wrong XOR check for data bits: 0x%02x 0x%02x\n", xor_value, xor_check[5]);\r
+#endif // ANALYZE\r
                                 irmp_ir_detected = FALSE;\r
                             }\r
 \r
@@ -3082,6 +4200,28 @@ irmp_ISR (void)
                         }\r
 #endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1\r
 \r
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+                        if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL)\r
+                        {\r
+                            if (parity == PARITY_CHECK_FAILED)\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("error 6: parity check failed\n");\r
+#endif // ANALYZE\r
+                                irmp_ir_detected = FALSE;\r
+                            }\r
+\r
+                            if ((irmp_tmp_address & 0x03) == 0x02)\r
+                            {\r
+#ifdef ANALYZE\r
+                                ANALYZE_PRINTF ("code skipped: ORTEK end of transmission frame (key release)\n");\r
+#endif // ANALYZE\r
+                                irmp_ir_detected = FALSE;\r
+                            }\r
+                            irmp_tmp_address >>= 2;\r
+                        }\r
+#endif // IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
+\r
 #if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
                         if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG)     // RC6 mode = 6?\r
                         {\r
@@ -3089,8 +4229,9 @@ irmp_ISR (void)
                         }\r
                         else\r
 #endif // IRMP_SUPPORT_RC6_PROTOCOL == 1\r
-\r
-                        irmp_protocol = irmp_param.protocol;\r
+                        {\r
+                            irmp_protocol = irmp_param.protocol;\r
+                        }\r
 \r
 #if IRMP_SUPPORT_FDC_PROTOCOL == 1\r
                         if (irmp_param.protocol == IRMP_FDC_PROTOCOL)\r
@@ -3134,7 +4275,7 @@ irmp_ISR (void)
                 {\r
                     if (last_irmp_command == irmp_tmp_command &&\r
                         last_irmp_address == irmp_tmp_address &&\r
-                        repetition_len < IRMP_KEY_REPETITION_LEN)\r
+                        key_repetition_len < IRMP_KEY_REPETITION_LEN)\r
                     {\r
                         irmp_flags |= IRMP_FLAG_REPETITION;\r
                     }\r
@@ -3142,14 +4283,15 @@ irmp_ISR (void)
                     last_irmp_address = irmp_tmp_address;                           // store as last address, too\r
                     last_irmp_command = irmp_tmp_command;                           // store as last command, too\r
 \r
-                    repetition_len = 0;\r
+                    key_repetition_len = 0;\r
                 }\r
                 else\r
                 {\r
+#ifdef ANALYZE\r
                     ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
+#endif // ANALYZE\r
                 }\r
 \r
-//              irmp_busy_flag          = FALSE;\r
                 irmp_start_bit_detected = 0;                                        // and wait for next start bit\r
                 irmp_tmp_command        = 0;\r
                 irmp_pulse_time         = 0;\r
@@ -3164,6 +4306,12 @@ irmp_ISR (void)
             }\r
         }\r
     }\r
+\r
+#if defined(STELLARIS_ARM_CORTEX_M4)\r
+    // Clear the timer interrupt\r
+    TimerIntClear(TIMER1_BASE, TIMER_TIMA_TIMEOUT);\r
+#endif\r
+\r
     return (irmp_ir_detected);\r
 }\r
 \r
@@ -3259,6 +4407,11 @@ print_timings (void)
             NUBERT_0_PULSE_LEN_MIN, NUBERT_0_PULSE_LEN_MAX, NUBERT_0_PAUSE_LEN_MIN, NUBERT_0_PAUSE_LEN_MAX,\r
             NUBERT_1_PULSE_LEN_MIN, NUBERT_1_PULSE_LEN_MAX, NUBERT_1_PAUSE_LEN_MIN, NUBERT_1_PAUSE_LEN_MAX);\r
 \r
+    printf ("SPEAKER        1  %3d - %3d  %3d - %3d  %3d - %3d  %3d - %3d  %3d - %3d  %3d - %3d\n",\r
+            SPEAKER_START_BIT_PULSE_LEN_MIN, SPEAKER_START_BIT_PULSE_LEN_MAX, SPEAKER_START_BIT_PAUSE_LEN_MIN, SPEAKER_START_BIT_PAUSE_LEN_MAX,\r
+            SPEAKER_0_PULSE_LEN_MIN, SPEAKER_0_PULSE_LEN_MAX, SPEAKER_0_PAUSE_LEN_MIN, SPEAKER_0_PAUSE_LEN_MAX,\r
+            SPEAKER_1_PULSE_LEN_MIN, SPEAKER_1_PULSE_LEN_MAX, SPEAKER_1_PAUSE_LEN_MIN, SPEAKER_1_PAUSE_LEN_MAX);\r
+\r
     printf ("BANG_OLUFSEN   1  %3d - %3d  %3d - %3d\n",\r
             BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX,\r
             BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX);\r
@@ -3312,6 +4465,19 @@ print_timings (void)
             LEGO_PULSE_LEN_MIN, LEGO_PULSE_LEN_MAX, LEGO_0_PAUSE_LEN_MIN, LEGO_0_PAUSE_LEN_MAX,\r
             LEGO_PULSE_LEN_MIN, LEGO_PULSE_LEN_MAX, LEGO_1_PAUSE_LEN_MIN, LEGO_1_PAUSE_LEN_MAX);\r
 \r
+    printf ("\n");\r
+    printf ("PROTOCOL       S  S-PULSE    S-PAUSE    PULSE      PAUSE-00   PAUSE-01   PAUSE-10   PAUSE-11\n");\r
+    printf ("================================================================================================\n");\r
+    printf ("RCMM           1   %3d        %3d        %3d        %3d        %3d        %3d        %3d\n",\r
+            (uint8_t)(F_INTERRUPTS * RCMM32_START_BIT_PULSE_TIME), (uint8_t)(F_INTERRUPTS * RCMM32_START_BIT_PAUSE_TIME),\r
+            (uint8_t)(F_INTERRUPTS * RCMM32_PULSE_TIME),\r
+            (uint8_t)(F_INTERRUPTS * RCMM32_00_PAUSE_TIME), (uint8_t)(F_INTERRUPTS * RCMM32_01_PAUSE_TIME),\r
+            (uint8_t)(F_INTERRUPTS * RCMM32_10_PAUSE_TIME), (uint8_t)(F_INTERRUPTS * RCMM32_11_PAUSE_TIME));\r
+    printf ("RCMM           1  %3d - %3d  %3d - %3d  %3d - %3d  %3d - %3d  %3d - %3d  %3d - %3d  %3d - %3d\n",\r
+            RCMM32_START_BIT_PULSE_LEN_MIN, RCMM32_START_BIT_PULSE_LEN_MAX, RCMM32_START_BIT_PAUSE_LEN_MIN, RCMM32_START_BIT_PAUSE_LEN_MAX,\r
+            RCMM32_BIT_PULSE_LEN_MIN, RCMM32_BIT_PULSE_LEN_MAX, RCMM32_BIT_00_PAUSE_LEN_MIN, RCMM32_BIT_00_PAUSE_LEN_MAX,\r
+            RCMM32_BIT_01_PAUSE_LEN_MIN, RCMM32_BIT_01_PAUSE_LEN_MAX, RCMM32_BIT_10_PAUSE_LEN_MIN, RCMM32_BIT_10_PAUSE_LEN_MAX,\r
+            RCMM32_BIT_11_PAUSE_LEN_MIN, RCMM32_BIT_11_PAUSE_LEN_MAX);\r
 }\r
 \r
 void\r
@@ -3339,7 +4505,7 @@ print_spectrum (char * text, int * buf, int is_pulse)
         }\r
     }\r
 \r
-    for (i = 1; i < 100; i++)\r
+    for (i = 1; i < 200; i++)\r
     {\r
         if (buf[i] > 0)\r
         {\r
@@ -3533,6 +4699,10 @@ get_fdc_key (uint16_t cmd)
 static int         analyze = FALSE;\r
 static int         list = FALSE;\r
 static IRMP_DATA   irmp_data;\r
+static int         expected_protocol;\r
+static int         expected_address;\r
+static int         expected_command;\r
+static int         do_check_expected_values;\r
 \r
 static void\r
 next_tick (void)\r
@@ -3556,8 +4726,8 @@ next_tick (void)
             {\r
                 if ((key >= 0x20 && key < 0x7F) || key >= 0xA0)\r
                 {\r
-                    printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x, asc = 0x%02x, key = '%c'\n",\r
-                            irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags, key, key);\r
+                    printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x, key='%c'",\r
+                            irmp_data.protocol,  irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key, key);\r
                 }\r
                 else if (key == '\r' || key == '\t' || key == KEY_ESCAPE || (key >= 0x80 && key <= 0x9F))                 // function keys\r
                 {\r
@@ -3598,19 +4768,39 @@ next_tick (void)
                         default                  : p = "<UNKNWON>";     break;\r
                     }\r
 \r
-                    printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x, asc = 0x%02x, key = %s\n",\r
-                            irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags, key, p);\r
+                    printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x, key=%s",\r
+                            irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key, p);\r
                 }\r
                 else\r
                 {\r
-                    printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x, asc = 0x%02x\n",\r
-                            irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags, key);\r
+                    printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x",\r
+                            irmp_data.protocol,  irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key);\r
                 }\r
             }\r
             else\r
             {\r
-                printf ("p = %2d, a = 0x%04x, c = 0x%04x, f = 0x%02x\n",\r
-                        irmp_data.protocol, irmp_data.address, irmp_data.command, irmp_data.flags);\r
+                printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x",\r
+                        irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags);\r
+            }\r
+\r
+            if (do_check_expected_values)\r
+            {\r
+                if (irmp_data.protocol != expected_protocol ||\r
+                    irmp_data.address  != expected_address  ||\r
+                    irmp_data.command  != expected_command)\r
+                {\r
+                    printf ("\nerror 7: expected values differ: p=%2d (%s), a=0x%04x, c=0x%04x\n",\r
+                            expected_protocol, irmp_protocol_names[expected_protocol], expected_address, expected_command);\r
+                }\r
+                else\r
+                {\r
+                    printf (" checked!\n");\r
+                }\r
+                do_check_expected_values = FALSE;                           // only check 1st frame in a line!\r
+            }\r
+            else\r
+            {\r
+                putchar ('\n');\r
             }\r
         }\r
     }\r
@@ -3656,6 +4846,10 @@ main (int argc, char ** argv)
             print_timings ();\r
             return (0);\r
         }\r
+        else if (! strcmp (argv[1], "-r"))\r
+        {\r
+            radio = TRUE;\r
+        }\r
     }\r
 \r
     for (i = 0; i < 256; i++)\r
@@ -3741,6 +4935,7 @@ main (int argc, char ** argv)
         else if (ch == '\n')\r
         {\r
             IRMP_PIN = 0xff;\r
+            time_counter = 0;\r
 \r
             if (list && pause > 0)\r
             {\r
@@ -3760,6 +4955,8 @@ main (int argc, char ** argv)
         }\r
         else if (ch == '#')\r
         {\r
+            time_counter = 0;\r
+\r
             if (analyze)\r
             {\r
                 while ((ch = getchar()) != '\n' && ch != EOF)\r
@@ -3769,13 +4966,81 @@ main (int argc, char ** argv)
             }\r
             else\r
             {\r
+                char            buf[1024];\r
+                char *          p;\r
+                int             idx = -1;\r
+\r
                 puts ("-------------------------------------------------------------------");\r
                 putchar (ch);\r
 \r
+\r
                 while ((ch = getchar()) != '\n' && ch != EOF)\r
                 {\r
                     if (ch != '\r')                                                         // ignore CR in DOS/Windows files\r
                     {\r
+                        if (ch == '[' && idx == -1)\r
+                        {\r
+                            idx = 0;\r
+                        }\r
+                        else if (idx >= 0)\r
+                        {\r
+                            if (ch == ']')\r
+                            {\r
+                                do_check_expected_values = FALSE;\r
+                                buf[idx] = '\0';\r
+                                idx = -1;\r
+\r
+                                expected_protocol = atoi (buf);\r
+\r
+                                if (expected_protocol > 0)\r
+                                {\r
+                                    p = buf;\r
+                                    while (*p)\r
+                                    {\r
+                                        if (*p == 'x')\r
+                                        {\r
+                                            p++;\r
+\r
+                                            if (sscanf (p, "%x", &expected_address) == 1)\r
+                                            {\r
+                                                do_check_expected_values = TRUE;\r
+                                            }\r
+                                            break;\r
+                                        }\r
+                                        p++;\r
+                                    }\r
+\r
+                                    if (do_check_expected_values)\r
+                                    {\r
+                                        do_check_expected_values = FALSE;\r
+\r
+                                        while (*p)\r
+                                        {\r
+                                            if (*p == 'x')\r
+                                            {\r
+                                                p++;\r
+\r
+                                                if (sscanf (p, "%x", &expected_command) == 1)\r
+                                                {\r
+                                                    do_check_expected_values = TRUE;\r
+                                                }\r
+                                                break;\r
+                                            }\r
+                                            p++;\r
+                                        }\r
+\r
+                                        if (do_check_expected_values)\r
+                                        {\r
+                                            // printf ("!%2d %04x %04x!\n", expected_protocol, expected_address, expected_command);\r
+                                        }\r
+                                    }\r
+                                }\r
+                            }\r
+                            else if (idx < 1024 - 2)\r
+                            {\r
+                                buf[idx++] = ch;\r
+                            }\r
+                        }\r
                         putchar (ch);\r
                     }\r
                 }\r