*\r
* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmpconfig.h,v 1.48 2011/02/08 08:40:27 fm Exp $\r
+ * $Id: irmpconfig.h,v 1.50 2011/02/21 11:49:37 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes\r
-#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~200 bytes\r
-#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 10000 ~250 bytes\r
-#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~150 bytes\r
-#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~150 bytes\r
-#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
-#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
-#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~250 bytes\r
-#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)\r
-#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
-#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes\r
-#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes\r
-#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes\r
+#define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~200 bytes\r
+#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // NUBERT >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // Bang & Olufsen >= 10000 ~200 bytes\r
+#define IRMP_SUPPORT_NIKON_PROTOCOL 1 // NIKON >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_FDC_PROTOCOL 1 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)\r
+#define IRMP_SUPPORT_RCCAR_PROTOCOL 1 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
+#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // Siemens Gigaset >= 15000 ~200 bytes\r
+#define IRMP_SUPPORT_RUWIDO_PROTOCOL 1 // RUWIDO, T-Home >= 15000 ~200 bytes\r
+#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // RECS80 >= 20000 ~50 bytes\r
+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // RECS80EXT >= 20000 ~50 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change hardware pin here:\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
#endif\r
\r
+#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+#warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)\r
+#undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r
+#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r
+#endif\r
+\r
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)\r
#undef IRMP_SUPPORT_RECS80_PROTOCOL\r
#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
#endif\r
\r
+#if F_INTERRUPTS > 20000\r
+#error F_INTERRUPTS too high (should be not more than 20000)\r
+#endif\r
+\r
#endif /* _WC_IRMPCONFIG_H_ */\r