*\r
* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H!\r
*\r
- * Copyright (c) 2010-2011 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2010-2015 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irsndconfig.h,v 1.40 2012/06/18 09:00:46 fm Exp $\r
- *\r
- * ATMEGA88 @ 8 MHz\r
+ * $Id: irsndconfig.h,v 1.70 2015/05/27 09:35:43 fm Exp $\r
*\r
* This program is free software; you can redistribute it and/or modify\r
* it under the terms of the GNU General Public License as published by\r
# error please include only irsnd.h, not irsndconfig.h\r
#endif\r
\r
+//~ #define IRSND_DEBUG 1 // activate debugging\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r
#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes\r
#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes\r
-#define IRSND_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~200 bytes\r
\r
// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
+#define IRSND_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~200 bytes\r
#define IRSND_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~150 bytes\r
#define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~250 bytes\r
#define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 ~250 bytes\r
// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
#define IRSND_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r
#define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~100 bytes\r
+#define IRSND_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~100 bytes\r
+#define IRSND_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER >= 10000 ~100 bytes\r
#define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 ~250 bytes\r
-#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~100 bytes\r
-#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~100 bytes\r
+#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 15000 ~100 bytes\r
+#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 15000 ~100 bytes\r
#define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r
#define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes\r
#define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r
#define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes\r
#define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes\r
-#define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 DON'T CHANGE, NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r
+#define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~250 bytes\r
+#define IRSND_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~200 bytes\r
#define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r
+#define IRSND_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 DON'T CHANGE, NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~150 bytes.\r
+#define IRSND_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes\r
+#define IRSND_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes\r
+\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * AVR section:\r
+ * AVR XMega section:\r
+ *\r
+ * Change hardware pin here: IRSND_XMEGA_OC0A = OC0A on ATxmegas supporting OC0A, e.g. ATxmega128A1U\r
+ * IRSND_XMEGA_OC0B = OC0B on ATxmegas supporting OC0B, e.g. ATxmega128A1U\r
+ * IRSND_XMEGA_OC0C = OC0C on ATxmegas supporting OC0C, e.g. ATxmega128A1U\r
+ * IRSND_XMEGA_OC0D = OC0D on ATxmegas supporting OC0D, e.g. ATxmega128A1U\r
+ * IRSND_XMEGA_OC1A = OC1A on ATxmegas supporting OC1A, e.g. ATxmega128A1U\r
+ * IRSND_XMEGA_OC1B = OC1B on ATxmegas supporting OC1B, e.g. ATxmega128A1U\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#if defined(__AVR_XMEGA__) // XMEGA\r
+# define IRSND_PORT_PRE PORTD \r
+# define XMEGA_Timer TCD0\r
+# define IRSND_OCx IRSND_XMEGA_OC0B // use OC0B\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * AVR ATMega/ATTiny section:\r
*\r
* Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8\r
* IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88\r
* IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#if defined(ATMEL_AVR)\r
+#elif defined(ATMEL_AVR)\r
# define IRSND_OCx IRSND_OC2B // use OC2B\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * PIC C18 section:\r
+ * PIC C18 or XC8 section:\r
*\r
* Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ...\r
* IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#elif defined(PIC_C18)\r
-# define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC\r
+#elif defined(PIC_C18) // C18 or XC8 compiler\r
+# if defined(__12F1840) // XC8 compiler\r
+# define Pre_Scaler 1 // define prescaler for timer2 e.g. 1,4,16\r
+# define F_CPU 32000000UL // PIC frequency: set your freq here\r
+# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value\r
+\r
+# else // C18 compiler\r
+# define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC\r
// change other PIC C18 specific settings:\r
-# define F_CPU 48000000UL // PIC frequency: set your freq here\r
-# define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16\r
-# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value\r
-# warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself !\r
+# define F_CPU 48000000UL // PIC frequency: set your freq here\r
+# define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16\r
+# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value\r
+# endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* ARM STM32 section:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#elif defined (ARM_STM32) // use A6 as IR output on STM32\r
-# define IRSND_PORT_LETTER A\r
+#elif defined (ARM_STM32) // use B6 as IR output on STM32\r
+# define IRSND_PORT_LETTER B\r
# define IRSND_BIT_NUMBER 6\r
-# define IRSND_TIMER_NUMBER 10\r
+# define IRSND_TIMER_NUMBER 4\r
# define IRSND_TIMER_CHANNEL_NUMBER 1 // only channel 1 can be used at the moment, others won't work\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Other target system\r
+ * Other target systems\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#elif !defined (UNIX_OR_WINDOWS)\r