/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* irmp.h\r
*\r
- * Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2009-2012 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmp.h,v 1.59 2011/03/10 12:29:14 fm Exp $\r
+ * $Id: irmp.h,v 1.79 2012/05/23 12:26:25 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
\r
-#ifndef _WC_IRMP_H_\r
-#define _WC_IRMP_H_\r
+#ifndef _IRMP_H_\r
+#define _IRMP_H_\r
\r
-#ifdef __cplusplus\r
-extern "C"\r
-{\r
-#endif\r
+#include "irmpsystem.h"\r
\r
-/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * timing constants:\r
- *---------------------------------------------------------------------------------------------------------------------------------------------------\r
- */\r
-#define IRMP_TIMEOUT_TIME 16500.0e-6 // timeout after 16.5 ms darkness\r
-#define IRMP_TIMEOUT_TIME_MS 16500L // timeout after 16.5 ms darkness\r
-\r
-#if IRMP_SUPPORT_NIKON_PROTOCOL == 1\r
-#define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)\r
-#define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness\r
-typedef uint16_t PAUSE_LEN;\r
-#define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)\r
-#else\r
-#if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254\r
-typedef uint16_t PAUSE_LEN;\r
-#else\r
-typedef uint8_t PAUSE_LEN;\r
-#endif\r
+#ifndef IRMP_USE_AS_LIB\r
+# include "irmpconfig.h"\r
#endif\r
\r
-#define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)\r
-\r
-/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * IR protocols\r
- *---------------------------------------------------------------------------------------------------------------------------------------------------\r
- */\r
-#define IRMP_SIRCS_PROTOCOL 1 // Sony\r
-#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.\r
-#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung\r
-#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita\r
-#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)\r
-#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba\r
-#define IRMP_RC5_PROTOCOL 7 // Philips etc\r
-#define IRMP_DENON_PROTOCOL 8 // Denon, Sharp\r
-#define IRMP_RC6_PROTOCOL 9 // Philips etc\r
-#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37\r
-#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC\r
-#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba\r
-#define IRMP_NUBERT_PROTOCOL 13 // Nubert\r
-#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen\r
-#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig\r
-#define IRMP_NOKIA_PROTOCOL 16 // Nokia\r
-#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset\r
-#define IRMP_FDC_PROTOCOL 18 // FDC keyboard\r
-#define IRMP_RCCAR_PROTOCOL 19 // RC Car\r
-#define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)\r
-#define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX\r
-#define IRMP_NIKON_PROTOCOL 22 // Nikon\r
-#define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver\r
-#define IRMP_IR60_PROTOCOL 24 // IR60 (SAB2008)\r
-#define IRMP_KATHREIN_PROTOCOL 25 // Kathrein\r
-#define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)\r
-#define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)\r
-#define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits\r
-#define IRMP_IMON_PROTOCOL 99 // Imon (bitserial) PROTOTYPE!\r
-\r
-// some flags of struct IRMP_PARAMETER:\r
-#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01\r
-#define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02\r
-#define IRMP_PARAM_FLAG_IS_SERIAL 0x04\r
-\r
-#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
-#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause\r
-#define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse\r
-#define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse\r
-#define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause\r
-#define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times\r
-#define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms\r
-#define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
-#define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits\r
-#define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits\r
-#define SIRCS_COMMAND_OFFSET 0 // skip 0 bits\r
-#define SIRCS_COMMAND_LEN 15 // read 12-15 command bits\r
-#define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length\r
-#define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20\r
-#define SIRCS_STOP_BIT 0 // has no stop bit\r
-#define SIRCS_LSB 1 // LSB...MSB\r
-#define SIRCS_FLAGS 0 // flags\r
-\r
-#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse\r
-#define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
-#define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause\r
-#define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse\r
-#define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
-#define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause\r
-#define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms\r
-#define NEC_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NEC_ADDRESS_LEN 16 // read 16 address bits\r
-#define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)\r
-#define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)\r
-#define NEC_COMPLETE_DATA_LEN 32 // complete length\r
-#define NEC_STOP_BIT 1 // has stop bit\r
-#define NEC_LSB 1 // LSB...MSB\r
-#define NEC_FLAGS 0 // flags\r
-\r
-#define NEC42_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NEC42_ADDRESS_LEN 13 // read 13 address bits\r
-#define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)\r
-#define NEC42_COMMAND_LEN 8 // read 8 command bits\r
-#define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)\r
-\r
-#define NEC16_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NEC16_ADDRESS_LEN 8 // read 8 address bits\r
-#define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)\r
-#define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)\r
-#define NEC16_COMPLETE_DATA_LEN 16 // complete length\r
-\r
-#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse\r
-#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
-#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse\r
-#define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause\r
-#define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause\r
-#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
-#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits\r
-#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit\r
-#define SAMSUNG_ID_LEN 4 // read 4 id bits\r
-#define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits\r
-#define SAMSUNG_COMMAND_LEN 16 // read 16 command bits\r
-#define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length\r
-#define SAMSUNG_STOP_BIT 1 // has stop bit\r
-#define SAMSUNG_LSB 1 // LSB...MSB?\r
-#define SAMSUNG_FLAGS 0 // flags\r
-\r
-#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits\r
-#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits\r
-#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length\r
-#define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times\r
-#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms\r
-#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms\r
-\r
-#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse\r
-#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause\r
-#define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse\r
-#define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause\r
-#define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause\r
-#define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits\r
-#define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits\r
-#define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits\r
-#define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)\r
-#define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length\r
-#define MATSUSHITA_STOP_BIT 1 // has stop bit\r
-#define MATSUSHITA_LSB 1 // LSB...MSB?\r
-#define MATSUSHITA_FLAGS 0 // flags\r
-\r
-#define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse\r
-#define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
-#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse\r
-#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause\r
-#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause\r
-#define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms\r
-#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms\r
-#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits\r
-#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)\r
-#define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)\r
-#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length\r
-#define KASEIKYO_STOP_BIT 1 // has stop bit\r
-#define KASEIKYO_LSB 1 // LSB...MSB?\r
-#define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times\r
-#define KASEIKYO_FLAGS 0 // flags\r
-\r
-#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
-#define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
-#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
-#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)\r
-#define RECS80_ADDRESS_LEN 3 // read 3 address bits\r
-#define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)\r
-#define RECS80_COMMAND_LEN 6 // read 6 command bits\r
-#define RECS80_COMPLETE_DATA_LEN 10 // complete length\r
-#define RECS80_STOP_BIT 1 // has stop bit\r
-#define RECS80_LSB 0 // MSB...LSB\r
-#define RECS80_FLAGS 0 // flags\r
-\r
-#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
-#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-\r
-#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RC5_ADDRESS_LEN 5 // read 5 address bits\r
-#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
-#define RC5_COMMAND_LEN 6 // read 6 command bits\r
-#define RC5_COMPLETE_DATA_LEN 13 // complete length\r
-#define RC5_STOP_BIT 0 // has no stop bit\r
-#define RC5_LSB 0 // MSB...LSB\r
-#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags\r
-\r
-#define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory\r
-#define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory\r
-#define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory\r
-#define DENON_FRAMES 2 // DENON sends each frame 2 times\r
-#define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms\r
-#define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms\r
-#define DENON_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define DENON_ADDRESS_LEN 5 // read 5 address bits\r
-#define DENON_COMMAND_OFFSET 5 // skip 5\r
-#define DENON_COMMAND_LEN 10 // read 10 command bits\r
-#define DENON_COMPLETE_DATA_LEN 15 // complete length\r
-#define DENON_STOP_BIT 1 // has stop bit\r
-#define DENON_LSB 0 // MSB...LSB\r
-#define DENON_FLAGS 0 // flags\r
-\r
-#define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse\r
-#define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause\r
-#define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause\r
-#define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause\r
-#define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit\r
-#define RC6_ADDRESS_LEN 8 // read 8 address bits\r
-#define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)\r
-#define RC6_COMMAND_LEN 8 // read 8 command bits\r
-#define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length\r
-#define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length\r
-#define RC6_STOP_BIT 0 // has no stop bit\r
-#define RC6_LSB 0 // MSB...LSB\r
-#define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
-\r
-#define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause\r
-#define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
-#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
-#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits\r
-#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)\r
-#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits\r
-#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length\r
-#define RECS80EXT_STOP_BIT 1 // has stop bit\r
-#define RECS80EXT_LSB 0 // MSB...LSB\r
-#define RECS80EXT_FLAGS 0 // flags\r
-\r
-#define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse\r
-#define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause\r
-#define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse\r
-#define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause\r
-#define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse\r
-#define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause\r
-#define NUBERT_FRAMES 2 // Nubert sends 2 frames\r
-#define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
-#define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms\r
-#define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NUBERT_ADDRESS_LEN 0 // read 0 address bits\r
-#define NUBERT_COMMAND_OFFSET 0 // skip 0 bits\r
-#define NUBERT_COMMAND_LEN 10 // read 10 bits\r
-#define NUBERT_COMPLETE_DATA_LEN 10 // complete length\r
-#define NUBERT_STOP_BIT 1 // has stop bit\r
-#define NUBERT_LSB 0 // MSB?\r
-#define NUBERT_FLAGS 0 // flags\r
-\r
-#define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse\r
-#define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
-#define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse\r
-#define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
-#define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse\r
-#define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause\r
-#define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse\r
-#define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
-#define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse\r
-#define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause\r
-#define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
-#define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)\r
-#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)\r
-#define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits\r
-#define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits\r
-#define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4\r
-#define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits\r
-#define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit\r
-#define BANG_OLUFSEN_STOP_BIT 1 // has stop bit\r
-#define BANG_OLUFSEN_LSB 0 // MSB...LSB\r
-#define BANG_OLUFSEN_FLAGS 0 // flags\r
-\r
-#define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
-#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
-#define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
-#define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit\r
-#define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB\r
-#define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
-\r
-#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times\r
-#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
-#define GRUNDIG_ADDRESS_OFFSET 0 // no address\r
-#define GRUNDIG_ADDRESS_LEN 0 // no address\r
-#define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit\r
-#define GRUNDIG_COMMAND_LEN 9 // read 9 command bits\r
-#define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits\r
-\r
-#define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times\r
-#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
-#define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)\r
-#define NOKIA_ADDRESS_LEN 8 // 7 address bits\r
-#define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)\r
-#define NOKIA_COMMAND_LEN 8 // read 8 command bits\r
-#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits\r
-\r
-#define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60\r
-#define IR60_ADDRESS_OFFSET 0 // skip 1 bits\r
-#define IR60_ADDRESS_LEN 0 // read 0 address bits\r
-#define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)\r
-#define IR60_COMMAND_LEN 7 // read 6 command bits\r
-#define IR60_COMPLETE_DATA_LEN 7 // complete length\r
-\r
-#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse\r
-#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause\r
-#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse\r
-#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse\r
-#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause\r
-#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause\r
-#define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit\r
-#define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB\r
-#define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
-\r
-#define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define RUWIDO_ADDRESS_LEN 9 // read 9 address bits\r
-#define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits\r
-#define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit\r
-#define RUWIDO_COMPLETE_DATA_LEN 17 // complete length\r
-\r
-#define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define SIEMENS_ADDRESS_LEN 11 // read 11 bits\r
-#define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits\r
-#define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit\r
-#define SIEMENS_COMPLETE_DATA_LEN 22 // complete length\r
-\r
-#define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse\r
-#define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause\r
-#define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse\r
-#define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause\r
-#define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause\r
-#define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms\r
-#define FDC_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command\r
-#define FDC_COMMAND_OFFSET 20 // skip 20 bits\r
-#define FDC_COMMAND_LEN 12 // read 12 bits\r
-#define FDC_COMPLETE_DATA_LEN 40 // complete length\r
-#define FDC_STOP_BIT 1 // has stop bit\r
-#define FDC_LSB 1 // LSB...MSB\r
-#define FDC_FLAGS 0 // flags\r
-\r
-#define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse\r
-#define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause\r
-#define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse\r
-#define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause\r
-#define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause\r
-#define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms\r
-#define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define RCCAR_ADDRESS_LEN 0 // read 0 address bits\r
-#define RCCAR_COMMAND_OFFSET 0 // skip 0 bits\r
-#define RCCAR_COMMAND_LEN 13 // read 13 bits\r
-#define RCCAR_COMPLETE_DATA_LEN 13 // complete length\r
-#define RCCAR_STOP_BIT 1 // has stop bit\r
-#define RCCAR_LSB 1 // LSB...MSB\r
-#define RCCAR_FLAGS 0 // flags\r
+#if defined (ATMEL_AVR)\r
+# define _CONCAT(a,b) a##b\r
+# define CONCAT(a,b) _CONCAT(a,b)\r
+# define IRMP_PORT CONCAT(PORT, IRMP_PORT_LETTER)\r
+# define IRMP_DDR CONCAT(DDR, IRMP_PORT_LETTER)\r
+# define IRMP_PIN CONCAT(PIN, IRMP_PORT_LETTER)\r
+# define IRMP_BIT IRMP_BIT_NUMBER\r
+# define input(x) ((x) & (1 << IRMP_BIT))\r
+#elif defined (PIC_C18)\r
+# define input(x) (x)\r
+#elif defined (PIC_CCS)\r
+# define input(x) (x)\r
+#elif defined (ARM_STM32)\r
+# define _CONCAT(a,b) a##b\r
+# define CONCAT(a,b) _CONCAT(a,b)\r
+# define IRMP_PORT CONCAT(GPIO, IRMP_PORT_LETTER)\r
+# if defined (ARM_STM32L1XX)\r
+# define IRMP_PORT_RCC CONCAT(RCC_AHBPeriph_GPIO, IRMP_PORT_LETTER)\r
+# elif defined (ARM_STM32F10X)\r
+# define IRMP_PORT_RCC CONCAT(RCC_APB2Periph_GPIO, IRMP_PORT_LETTER)\r
+# elif defined (ARM_STM32F4XX)\r
+# define IRMP_PORT_RCC CONCAT(RCC_AHB1Periph_GPIO, IRMP_PORT_LETTER)\r
+# endif\r
+# define IRMP_BIT CONCAT(GPIO_Pin_, IRMP_BIT_NUMBER)\r
+# define IRMP_PIN IRMP_PORT // for use with input(x) below\r
+# define input(x) (GPIO_ReadInputDataBit(x, IRMP_BIT))\r
+# ifndef USE_STDPERIPH_DRIVER\r
+# warning The STM32 port of IRMP uses the ST standard peripheral drivers which are not enabled in your build configuration.\r
+# endif\r
+#endif\r
\r
-#define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse\r
-#define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
-#define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse\r
-#define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
-#define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause\r
-#define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms\r
-#define JVC_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define JVC_ADDRESS_LEN 4 // read 4 address bits\r
-#define JVC_COMMAND_OFFSET 4 // skip 4 bits\r
-#define JVC_COMMAND_LEN 12 // read 12 bits\r
-#define JVC_COMPLETE_DATA_LEN 16 // complete length\r
-#define JVC_STOP_BIT 1 // has stop bit\r
-#define JVC_LSB 1 // LSB...MSB\r
-#define JVC_FLAGS 0 // flags\r
+#if IRMP_SUPPORT_DENON_PROTOCOL == 1 && IRMP_SUPPORT_RUWIDO_PROTOCOL == 1\r
+# warning DENON protocol conflicts wih RUWIDO, please enable only one of both protocols\r
+# warning RUWIDO protocol disabled\r
+# undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r
+# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r
+#endif\r
\r
-#define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse\r
-#define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause\r
-#define NIKON_PULSE_TIME 500.0e-6 // 520 usec pulse\r
-#define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause\r
-#define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause\r
-#define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms\r
-#define NIKON_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NIKON_ADDRESS_LEN 0 // read 0 address bits\r
-#define NIKON_COMMAND_OFFSET 0 // skip 0 bits\r
-#define NIKON_COMMAND_LEN 2 // read 2 bits\r
-#define NIKON_COMPLETE_DATA_LEN 2 // complete length\r
-#define NIKON_STOP_BIT 1 // has stop bit\r
-#define NIKON_LSB 0 // LSB...MSB\r
-#define NIKON_FLAGS 0 // flags\r
+#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+# warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
+# define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
+#endif\r
\r
-#define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
-#define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause\r
-#define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
-#define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause\r
-#define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse\r
-#define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause\r
-#define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)\r
-#define KATHREIN_FRAMES 1 // Kathrein sends 1 frame\r
-#define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
-#define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
-#define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits\r
-#define KATHREIN_ADDRESS_LEN 4 // read 4 address bits\r
-#define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits\r
-#define KATHREIN_COMMAND_LEN 7 // read 7 bits\r
-#define KATHREIN_COMPLETE_DATA_LEN 13 // complete length\r
-#define KATHREIN_STOP_BIT 1 // has stop bit\r
-#define KATHREIN_LSB 0 // MSB\r
-#define KATHREIN_FLAGS 0 // flags\r
+#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+# warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r
+# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r
+#endif\r
\r
-#define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
-#define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause\r
-#define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse\r
-#define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause\r
-#define NETBOX_FRAMES 1 // Netbox sends 1 frame\r
-#define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
-#define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
-#define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NETBOX_ADDRESS_LEN 3 // read 3 address bits\r
-#define NETBOX_COMMAND_OFFSET 3 // skip 3 bits\r
-#define NETBOX_COMMAND_LEN 13 // read 13 bits\r
-#define NETBOX_COMPLETE_DATA_LEN 16 // complete length\r
-#define NETBOX_STOP_BIT 0 // has no stop bit\r
-#define NETBOX_LSB 1 // LSB\r
-#define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags\r
+#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+# warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_RECS80_PROTOCOL\r
+# define IRMP_SUPPORT_RECS80_PROTOCOL 0\r
+#endif\r
\r
-#define IMON_START_BIT_PULSE_TIME 1333.0e-6 // 1333 usec pulse\r
-#define IMON_START_BIT_PAUSE_TIME 1172.0e-6 // 1333 usec pause\r
-#define IMON_PULSE_TIME 500.0e-6 // 500 usec pulse\r
-#define IMON_PAUSE_TIME 500.0e-6 // 500 usec pause\r
-#define IMON_FRAMES 1 // Imon sends 1 frame\r
-#define IMON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
-#define IMON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
-#define IMON_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define IMON_ADDRESS_LEN 0 // read 0 address bits\r
-#define IMON_COMMAND_OFFSET 26 // skip 26 bits\r
-#define IMON_COMMAND_LEN 16 // read last 16 bits, ignore rest\r
-#define IMON_COMPLETE_DATA_LEN 42 // complete length, last is stop bit\r
-#define IMON_STOP_BIT 1 // has stop bit\r
-#define IMON_LSB 1 // LSB\r
-#define IMON_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags\r
+#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+# warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
+# define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r
+#endif\r
\r
-#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms\r
- // KASEIKYO: automatic repetition after 75ms\r
+#if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
+# warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)\r
+# undef IRMP_SUPPORT_LEGO_PROTOCOL\r
+# define IRMP_SUPPORT_LEGO_PROTOCOL 0\r
+#endif\r
\r
-#define TRUE 1\r
-#define FALSE 0\r
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+# warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
+# undef IRMP_SUPPORT_NEC_PROTOCOL\r
+# define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+#endif\r
\r
-#define IRMP_FLAG_REPETITION 0x01\r
+#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+# warning NEC16 protocol needs also NEC protocol, NEC protocol enabled\r
+# undef IRMP_SUPPORT_NEC_PROTOCOL\r
+# define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+#endif\r
\r
-typedef struct\r
-{\r
- uint8_t protocol; // protocol, i.e. NEC_PROTOCOL\r
- uint16_t address; // address\r
- uint16_t command; // command\r
- uint8_t flags; // flags, e.g. repetition\r
-} IRMP_DATA;\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+# warning NEC42 protocol needs also NEC protocol, NEC protocol enabled\r
+# undef IRMP_SUPPORT_NEC_PROTOCOL\r
+# define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+#endif\r
\r
+#if F_INTERRUPTS > 20000\r
+#error F_INTERRUPTS too high (should be not greater than 20000)\r
+#endif\r
\r
-/**\r
- * Initialize IRMP decoder\r
- * @details Configures IRMP input pin\r
- */\r
-extern void irmp_init (void);\r
+#include "irmpprotocols.h"\r
\r
-/**\r
- * Get IRMP data\r
- * @details gets decoded IRMP data\r
- * @param pointer in order to store IRMP data\r
- * @return TRUE: successful, FALSE: failed\r
- */\r
-extern uint8_t irmp_get_data (IRMP_DATA *);\r
+#define IRMP_FLAG_REPETITION 0x01\r
\r
-/**\r
- * ISR routine\r
- * @details ISR routine, called 10000 times per second\r
- */\r
-extern uint8_t irmp_ISR (void);\r
+extern void irmp_init (void);\r
+extern uint8_t irmp_get_data (IRMP_DATA *);\r
+extern uint8_t irmp_is_busy (void);\r
+extern uint8_t irmp_ISR (void);\r
\r
-#ifdef __cplusplus\r
-}\r
+#if IRMP_PROTOCOL_NAMES == 1\r
+extern char * irmp_protocol_names[IRMP_N_PROTOCOLS + 1];\r
#endif\r
\r
-#endif /* _WC_IRMP_H_ */\r
+#if IRMP_USE_CALLBACK == 1\r
+extern void irmp_set_callback_ptr (void (*cb)(uint8_t));\r
+#endif // IRMP_USE_CALLBACK == 1\r
+\r
+#endif /* _IRMP_H_ */\r