*\r
* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r
*\r
- * Copyright (c) 2009-2012 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2009-2016 Frank Meyer - frank(at)fli4l.de\r
+ * Extensions for PIC 12F1820 W.Strobl 2014-07-20\r
*\r
- * $Id: irmpconfig.h,v 1.92 2012/07/11 13:14:08 fm Exp $\r
- *\r
- * ATMEGA88 @ 8 MHz\r
+ * $Id: irmpconfig.h,v 1.152 2017/02/17 09:13:06 fm Exp $\r
*\r
* This program is free software; you can redistribute it and/or modify\r
* it under the terms of the GNU General Public License as published by\r
* Change F_INTERRUPTS if you change the number of interrupts per second,\r
* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
* A value above 15000 costs additional program space, absolute maximum value is 20000.\r
+ * On PIC with XC8/C18 Compiler, use 15151 as the correct value.\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#ifndef F_INTERRUPTS\r
// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r
#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r
#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r
-#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r
-#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes\r
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
-#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r
\r
// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
-#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r
-#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r
#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r
#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r
+#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes\r
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r
#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes\r
#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r
#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r
#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
+#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r
#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r
#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
+#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r
#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r
+#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes\r
#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r
+#define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes\r
+#define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes\r
+#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)\r
+#define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes\r
+#define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_TECHNICS_PROTOCOL 0 // TECHNICS >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 0 // Mitsubishi Aircond >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_VINCENT_PROTOCOL 0 // VINCENT >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 1 // SAMSUNG AH >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change hardware pin here for ATMEL AVR\r
+ * Change hardware pin here for ATMEL ATMega/ATTiny/XMega\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#if defined (ATMEL_AVR) // use PB6 as IR input on AVR\r
+#if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR\r
# define IRMP_PORT_LETTER B\r
# define IRMP_BIT_NUMBER 6\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change hardware pin here for PIC C18 compiler\r
+ * Change hardware pin here for PIC C18 or XC8 compiler\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#elif defined (PIC_C18) // use RB4 as IR input on PIC\r
-# define IRMP_PIN PORTBbits.RB4\r
+#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)\r
+# if defined(__12F1840)\r
+# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler\r
+# else\r
+# define IRMP_PIN PORTBbits.RB4 // PIC C18\r
+# endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change hardware pin here for PIC CCS compiler\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#elif defined (PIC_CCS)\r
-# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
+# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler)\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change hardware pin here for ARM STM32\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#elif defined (ARM_STM32) // use C13 as IR input on STM32\r
-# define IRMP_PORT_LETTER C\r
-# define IRMP_BIT_NUMBER 13\r
+# define IRMP_PORT_LETTER B\r
+# define IRMP_BIT_NUMBER 4\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change hardware pin here for ARM STM32 with libopencm3\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined (LIBOPENCM3)\r
+# define IRMP_PORT_LETTER B\r
+# define IRMP_BIT_NUMBER 4\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change hardware pin here for Stellaris ARM Cortex M4\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F\r
+# define IRMP_PORT_LETTER B\r
+# define IRMP_BIT_NUMBER 4\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change hardware pin here for STM8\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined (SDCC_STM8) // use PA1 as IR input on STM8\r
+# define IRMP_PORT_LETTER A\r
+# define IRMP_BIT_NUMBER 1\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change hardware pin here for ESP8266\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined (__xtensa__)\r
+# define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change hardware pin here for Teensy 3.x with teensyduino gcc compiler\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined (TEENSY_ARM_CORTEX_M4)\r
+# define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change hardware pin here for MBED\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined(__MBED__)\r
+# define IRMP_PIN P0_22 // use P1_27 on LPC1347\r
+# define IRMP_PINMODE PullUp // hardware dependent\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Handling of unknown target system: DON'T CHANGE\r
# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r
#endif\r
\r
-#endif /* _WC_IRMPCONFIG_H_ */\r
+#endif // _IRMPCONFIG_H_\r
projects / irmp.git / blobdiff