*\r
* Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de\r
*\r
+ * $Id: irmp.h,v 1.26 2010/06/08 23:34:14 fm Exp $\r
+ *\r
* ATMEGA88 @ 8 MHz\r
*\r
* This program is free software; you can redistribute it and/or modify\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
+ * IR protocols\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define F_INTERRUPTS 10000 // interrupts per second\r
-\r
-#define IRMP_SIRCS_PROTOCOL 1 // Sony\r
-#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.\r
-#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung\r
-#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita\r
-#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)\r
-#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba\r
-#define IRMP_RC5_PROTOCOL 7 // Philips etc\r
-#define IRMP_DENON_PROTOCOL 8 // Denon\r
-#define IRMP_RC6_PROTOCOL 9 // Philips etc\r
-#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37\r
-#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC\r
-#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba\r
-#define IRMP_NUBERT_PROTOCOL 13 // Nubert\r
-\r
-#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
-#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause\r
-#define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse\r
-#define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse\r
-#define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause\r
-#define SIRCS_REPETITION_TIME 45.0e-3 // repetition after 45ms\r
-#define SIRCS_REPETITION_CNT 3 // SIRCS repeats each frame 3 times\r
-#define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits\r
-#define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits\r
-#define SIRCS_COMMAND_OFFSET 0 // skip 0 bits\r
-#define SIRCS_COMMAND_LEN 15 // read 12-15 command bits\r
-#define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length\r
-#define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20\r
-#define SIRCS_STOP_BIT 0 // has no stop bit\r
-#define SIRCS_LSB 1 // LSB...MSB\r
-\r
-#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse\r
-#define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
-#define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause\r
-#define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse\r
-#define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
-#define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause\r
-#define NEC_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NEC_ADDRESS_LEN 16 // read 16 address bits\r
-#define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)\r
-#define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)\r
-#define NEC_COMPLETE_DATA_LEN 32 // complete length\r
-#define NEC_STOP_BIT 1 // has stop bit\r
-#define NEC_LSB 1 // LSB...MSB\r
-\r
-#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse\r
-#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
-#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse\r
-#define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause\r
-#define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause\r
-#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits\r
-#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit\r
-#define SAMSUNG_ID_LEN 4 // read 4 id bits\r
-#define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits\r
-#define SAMSUNG_COMMAND_LEN 16 // read 16 command bits\r
-#define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length\r
-#define SAMSUNG_STOP_BIT 1 // has stop bit\r
-#define SAMSUNG_LSB 1 // LSB...MSB?\r
-\r
-#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits\r
-#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits\r
-#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length\r
-\r
-#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse\r
-#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause\r
-#define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse\r
-#define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause\r
-#define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause\r
-#define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits\r
-#define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits\r
-#define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits\r
-#define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)\r
-#define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length\r
-#define MATSUSHITA_STOP_BIT 1 // has stop bit\r
-#define MATSUSHITA_LSB 1 // LSB...MSB?\r
-\r
-#define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse\r
-#define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
-#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse\r
-#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause\r
-#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause\r
-#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits\r
-#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)\r
-#define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)\r
-#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length\r
-#define KASEIKYO_STOP_BIT 1 // has stop bit\r
-#define KASEIKYO_LSB 1 // LSB...MSB?\r
-\r
-#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
-#define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
-#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
-#define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RECS80_ADDRESS_LEN 3 // read 3 address bits\r
-#define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address)\r
-#define RECS80_COMMAND_LEN 6 // read 6 command bits\r
-#define RECS80_COMPLETE_DATA_LEN 11 // complete length\r
-#define RECS80_STOP_BIT 1 // has stop bit\r
-#define RECS80_LSB 0 // MSB...LSB\r
-\r
-#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
-#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RC5_ADDRESS_LEN 5 // read 5 address bits\r
-#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
-#define RC5_COMMAND_LEN 6 // read 6 command bits\r
-#define RC5_COMPLETE_DATA_LEN 13 // complete length\r
-#define RC5_STOP_BIT 0 // has no stop bit\r
-#define RC5_LSB 0 // MSB...LSB\r
-\r
-#define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse\r
-#define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause\r
-#define DENON_0_PAUSE_TIME 1050.0e-6 // 1050 usec pause\r
-#define DENON_REPETITION_TIME 65.0e-3 // inverted repetition after 65ms\r
-#define DENON_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define DENON_ADDRESS_LEN 5 // read 5 address bits\r
-#define DENON_COMMAND_OFFSET 5 // skip 5\r
-#define DENON_COMMAND_LEN 10 // read 10 command bits\r
-#define DENON_COMPLETE_DATA_LEN 15 // complete length\r
-#define DENON_STOP_BIT 1 // has stop bit\r
-#define DENON_LSB 0 // MSB...LSB\r
-\r
-#define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse\r
-#define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause\r
-#define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause\r
-#define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause\r
-#define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit\r
-#define RC6_ADDRESS_LEN 8 // read 8 address bits\r
-#define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)\r
-#define RC6_COMMAND_LEN 8 // read 8 command bits\r
-#define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length\r
-#define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length\r
-#define RC6_STOP_BIT 0 // has no stop bit\r
-#define RC6_LSB 0 // MSB...LSB\r
-\r
-#define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause\r
-#define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
-#define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
-#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
-#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits\r
-#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)\r
-#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits\r
-#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length\r
-#define RECS80EXT_STOP_BIT 1 // has stop bit\r
-#define RECS80EXT_LSB 0 // MSB...LSB\r
-\r
-#define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse\r
-#define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause\r
-#define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse\r
-#define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause\r
-#define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse\r
-#define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause\r
-#define NUBERT_REPETITION_TIME 35.0e-3 // repetition after 35ms\r
-#define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define NUBERT_ADDRESS_LEN 0 // read 0 address bits\r
-#define NUBERT_COMMAND_OFFSET 0 // skip 0 bits\r
-#define NUBERT_COMMAND_LEN 10 // read 10 bits\r
-#define NUBERT_COMPLETE_DATA_LEN 10 // complete length\r
-#define NUBERT_STOP_BIT 1 // has stop bit\r
-#define NUBERT_LSB 0 // MSB?\r
-\r
-#define AUTO_REPETITION_TIME 50.0e-3 // SIRCS or SAMSUNG32: automatic repetition after 45-50ms\r
+#define IRMP_SIRCS_PROTOCOL 1 // Sony\r
+#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.\r
+#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung\r
+#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita\r
+#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)\r
+#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba\r
+#define IRMP_RC5_PROTOCOL 7 // Philips etc\r
+#define IRMP_DENON_PROTOCOL 8 // Denon\r
+#define IRMP_RC6_PROTOCOL 9 // Philips etc\r
+#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37\r
+#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC\r
+#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba\r
+#define IRMP_NUBERT_PROTOCOL 13 // Nubert\r
+#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen\r
+#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig\r
+#define IRMP_NOKIA_PROTOCOL 16 // Nokia\r
+#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset\r
+#define IRMP_FDC_PROTOCOL 18 // FDC keyboard\r
+\r
+#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
+#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause\r
+#define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse\r
+#define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse\r
+#define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause\r
+#define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times\r
+#define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms\r
+#define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
+#define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits\r
+#define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits\r
+#define SIRCS_COMMAND_OFFSET 0 // skip 0 bits\r
+#define SIRCS_COMMAND_LEN 15 // read 12-15 command bits\r
+#define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length\r
+#define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20\r
+#define SIRCS_STOP_BIT 0 // has no stop bit\r
+#define SIRCS_LSB 1 // LSB...MSB\r
+\r
+#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse\r
+#define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
+#define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause\r
+#define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse\r
+#define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
+#define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause\r
+#define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms\r
+#define NEC_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NEC_ADDRESS_LEN 16 // read 16 address bits\r
+#define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)\r
+#define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)\r
+#define NEC_COMPLETE_DATA_LEN 32 // complete length\r
+#define NEC_STOP_BIT 1 // has stop bit\r
+#define NEC_LSB 1 // LSB...MSB\r
+\r
+#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse\r
+#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
+#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse\r
+#define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause\r
+#define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause\r
+#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits\r
+#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit\r
+#define SAMSUNG_ID_LEN 4 // read 4 id bits\r
+#define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits\r
+#define SAMSUNG_COMMAND_LEN 16 // read 16 command bits\r
+#define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length\r
+#define SAMSUNG_STOP_BIT 1 // has stop bit\r
+#define SAMSUNG_LSB 1 // LSB...MSB?\r
+\r
+#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits\r
+#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits\r
+#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length\r
+#define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times\r
+#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms\r
+#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms\r
+\r
+#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse\r
+#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause\r
+#define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse\r
+#define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause\r
+#define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause\r
+#define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits\r
+#define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits\r
+#define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits\r
+#define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)\r
+#define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length\r
+#define MATSUSHITA_STOP_BIT 1 // has stop bit\r
+#define MATSUSHITA_LSB 1 // LSB...MSB?\r
+\r
+#define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse\r
+#define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
+#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse\r
+#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause\r
+#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause\r
+#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits\r
+#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)\r
+#define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)\r
+#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length\r
+#define KASEIKYO_STOP_BIT 1 // has stop bit\r
+#define KASEIKYO_LSB 1 // LSB...MSB?\r
+\r
+#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
+#define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
+#define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse\r
+#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
+#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
+#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
+#define RECS80_ADDRESS_LEN 3 // read 3 address bits\r
+#define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address)\r
+#define RECS80_COMMAND_LEN 6 // read 6 command bits\r
+#define RECS80_COMPLETE_DATA_LEN 11 // complete length\r
+#define RECS80_STOP_BIT 1 // has stop bit\r
+#define RECS80_LSB 0 // MSB...LSB\r
+\r
+#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
+#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
+#define RC5_ADDRESS_LEN 5 // read 5 address bits\r
+#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
+#define RC5_COMMAND_LEN 6 // read 6 command bits\r
+#define RC5_COMPLETE_DATA_LEN 13 // complete length\r
+#define RC5_STOP_BIT 0 // has no stop bit\r
+#define RC5_LSB 0 // MSB...LSB\r
+\r
+#define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse\r
+#define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause\r
+#define DENON_0_PAUSE_TIME 775.0e-6 // 775 usec pause\r
+#define DENON_FRAMES 2 // DENON sends each frame 2 times\r
+#define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms\r
+#define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms\r
+#define DENON_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define DENON_ADDRESS_LEN 5 // read 5 address bits\r
+#define DENON_COMMAND_OFFSET 5 // skip 5\r
+#define DENON_COMMAND_LEN 10 // read 10 command bits\r
+#define DENON_COMPLETE_DATA_LEN 15 // complete length\r
+#define DENON_STOP_BIT 1 // has stop bit\r
+#define DENON_LSB 0 // MSB...LSB\r
+\r
+#define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse\r
+#define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause\r
+#define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause\r
+#define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause\r
+#define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit\r
+#define RC6_ADDRESS_LEN 8 // read 8 address bits\r
+#define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)\r
+#define RC6_COMMAND_LEN 8 // read 8 command bits\r
+#define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length\r
+#define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length\r
+#define RC6_STOP_BIT 0 // has no stop bit\r
+#define RC6_LSB 0 // MSB...LSB\r
+\r
+#define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
+#define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause\r
+#define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
+#define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
+#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
+#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
+#define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits\r
+#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)\r
+#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits\r
+#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length\r
+#define RECS80EXT_STOP_BIT 1 // has stop bit\r
+#define RECS80EXT_LSB 0 // MSB...LSB\r
+\r
+#define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse\r
+#define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause\r
+#define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse\r
+#define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause\r
+#define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse\r
+#define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause\r
+#define NUBERT_FRAMES 2 // Nubert sends 2 frames\r
+#define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms\r
+#define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NUBERT_ADDRESS_LEN 0 // read 0 address bits\r
+#define NUBERT_COMMAND_OFFSET 0 // skip 0 bits\r
+#define NUBERT_COMMAND_LEN 10 // read 10 bits\r
+#define NUBERT_COMPLETE_DATA_LEN 10 // complete length\r
+#define NUBERT_STOP_BIT 1 // has stop bit\r
+#define NUBERT_LSB 0 // MSB?\r
+\r
+#define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse\r
+#define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
+#define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse\r
+#define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
+#define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse\r
+#define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause\r
+#define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse\r
+#define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
+#define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse\r
+#define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause\r
+#define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause\r
+#define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)\r
+#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)\r
+#define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits\r
+#define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits\r
+#define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4\r
+#define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits\r
+#define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit\r
+#define BANG_OLUFSEN_STOP_BIT 1 // has stop bit\r
+#define BANG_OLUFSEN_LSB 0 // MSB...LSB\r
+\r
+#define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
+#define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
+#define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
+#define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit\r
+#define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB\r
+\r
+#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times\r
+#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
+#define GRUNDIG_ADDRESS_OFFSET 0 // no address\r
+#define GRUNDIG_ADDRESS_LEN 0 // no address\r
+#define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit\r
+#define GRUNDIG_COMMAND_LEN 9 // read 9 command bits\r
+#define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits\r
+\r
+#define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times\r
+#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
+#define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)\r
+#define NOKIA_ADDRESS_LEN 8 // 7 address bits\r
+#define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)\r
+#define NOKIA_COMMAND_LEN 8 // read 8 command bits\r
+#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits\r
+\r
+#define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause\r
+#define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits\r
+#define SIEMENS_ADDRESS_LEN 12 // read 12 address bits\r
+#define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit)\r
+#define SIEMENS_COMMAND_LEN 7 // read 7 command bits\r
+#define SIEMENS_COMPLETE_DATA_LEN 23 // complete length\r
+#define SIEMENS_STOP_BIT 0 // has no stop bit\r
+#define SIEMENS_LSB 0 // MSB...LSB\r
+\r
+#define FDC_START_BIT_PULSE_TIME 1390.0e-6 // 1390 usec pulse\r
+#define FDC_START_BIT_PAUSE_TIME 640.0e-6 // 640 usec pause\r
+#define FDC_PULSE_TIME 200.0e-6 // 200 usec pulse\r
+#define FDC_1_PAUSE_TIME 475.0e-6 // 475 usec pause\r
+#define FDC_0_PAUSE_TIME 145.0e-6 // 145 usec pause\r
+#define FDC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms\r
+#define FDC_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define FDC_ADDRESS_LEN 16 // read 16 address bits\r
+#define FDC_COMMAND_OFFSET 25 // skip 25 bits (16 address + 9 0-bits)\r
+#define FDC_COMMAND_LEN 12 // read 12 bits\r
+#define FDC_COMPLETE_DATA_LEN 40 // complete length\r
+#define FDC_STOP_BIT 1 // has stop bit\r
+#define FDC_LSB 1 // LSB...MSB\r
+\r
+#define AUTO_FRAME_REPETITION_TIME 50.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms\r
\r
#define TRUE 1\r
#define FALSE 0\r
\r
typedef struct\r
{\r
- uint8_t protocol; // protocol, i.e. NEC_PROTOCOL\r
- uint16_t address; // address\r
- uint16_t command; // command\r
- uint8_t flags; // flags, e.g. repetition\r
+ uint8_t protocol; // protocol, i.e. NEC_PROTOCOL\r
+ uint16_t address; // address\r
+ uint16_t command; // command\r
+ uint8_t flags; // flags, e.g. repetition\r
} IRMP_DATA;\r
\r
\r