*\r
* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id$\r
+ * $Id: irsndconfig.h,v 1.17 2011/01/18 13:02:15 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#ifndef F_INTERRUPTS\r
+#define F_INTERRUPTS 10000 // interrupts per second\r
+#endif\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change settings from 1 to 0 if you want to disable one or more encoders.\r
* This saves program space.\r
* 0 disable decoder\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~150 bytes\r
-#define IRSND_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~100 bytes\r
-#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~300 bytes\r
-#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~150 bytes\r
-#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 0 // flag: support Kaseikyo NOT SUPPORTED YET!\r
-#define IRSND_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~100 bytes\r
-#define IRSND_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes\r
-#define IRSND_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~200 bytes\r
-#define IRSND_SUPPORT_RC6_PROTOCOL 0 // flag: support RC6 NOT SUPPORTED YET!\r
-#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~100 bytes\r
-#define IRSND_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~100 bytes\r
-#define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang&Olufsen uses ~250 bytes\r
+// Protocol Enable Remarks F_INTERRUPTS Program Space\r
+#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 uses ~150 bytes\r
+#define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 uses ~100 bytes\r
+#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 uses ~300 bytes\r
+#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 uses ~200 bytes\r
+#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 uses ~150 bytes\r
+#define IRSND_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 uses ~150 bytes\r
+#define IRSND_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 uses ~200 bytes\r
+#define IRSND_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 uses ~150 bytes\r
+#define IRSND_SUPPORT_RC6_PROTOCOL 1 // RC6 >= 10000 uses ~250 bytes\r
+#define IRSND_SUPPORT_RC6A_PROTOCOL 1 // RC6A >= 10000 uses ~250 bytes\r
+#define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // Bang&Olufsen >= 10000 uses ~250 bytes\r
+#define IRSND_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 uses ~300 bytes\r
+#define IRSND_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 uses ~400 bytes\r
+#define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 uses ~100 bytes\r
+#define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 uses ~150 bytes\r
+#define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) uses ~150 bytes\r
+#define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) uses ~150 bytes\r
+#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 uses ~150 bytes\r
+#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 uses ~100 bytes\r
+#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 uses ~100 bytes\r
\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#if defined (__AVR_ATmega32__) || defined (__AVR_ATmega644P__)\r
-#define IRSND_PORT PORTD // port D\r
-#define IRSND_DDR DDRD // ddr D\r
-#define IRSND_BIT 7 // OC2A\r
+#define IRSND_PORT PORTD // port D\r
+#define IRSND_DDR DDRD // ddr D\r
+#define IRSND_BIT 7 // OC2A\r
#else\r
-#define IRSND_PORT PORTB // port B\r
-#define IRSND_DDR DDRB // ddr B\r
-#define IRSND_BIT 3 // OC2A\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 3 // OC2A\r
#endif // __AVR...\r
\r
-/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
- *---------------------------------------------------------------------------------------------------------------------------------------------------\r
- */\r
-#define F_INTERRUPTS 10000 // interrupts per second\r
+\r
+#if IRSND_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
+#undef IRSND_SUPPORT_SIEMENS_PROTOCOL\r
+#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
+#endif\r
+\r
+#if IRSND_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
+#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)\r
+#undef IRSND_SUPPORT_RECS80_PROTOCOL\r
+#define IRSND_SUPPORT_RECS80_PROTOCOL 0\r
+#endif\r
+\r
+#if IRSND_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
+#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)\r
+#undef IRSND_SUPPORT_RECS80EXT_PROTOCOL\r
+#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0\r
+#endif\r