/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* irmp.h\r
*\r
- * Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmp.h,v 1.33 2010/06/14 15:55:11 fm Exp $\r
+ * $Id: irmp.h,v 1.72 2012/02/24 14:24:27 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
#ifndef _WC_IRMP_H_\r
#define _WC_IRMP_H_\r
\r
-#ifdef __cplusplus\r
-extern "C"\r
-{\r
+#if defined(__18CXX) // Microchip C18 declaration of missing typedef\r
+typedef unsigned char uint8_t;\r
+typedef unsigned int uint16_t;\r
+#endif //Microchip C18\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * timing constants:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+// fm 22.09.2011: may not be more than 16000L, otherwise some JVC codes will not be accepted\r
+#define IRMP_TIMEOUT_TIME 15500.0e-6 // timeout after 15.5 ms darkness\r
+#define IRMP_TIMEOUT_TIME_MS 15500L // timeout after 15.5 ms darkness\r
+\r
+#if IRMP_SUPPORT_NIKON_PROTOCOL == 1\r
+#define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)\r
+#define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness\r
+typedef uint16_t PAUSE_LEN;\r
+#define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)\r
+#else\r
+#if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254\r
+typedef uint16_t PAUSE_LEN;\r
+#else\r
+typedef uint8_t PAUSE_LEN;\r
#endif\r
+#endif\r
+\r
+#define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* IR protocols\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define IRMP_SIRCS_PROTOCOL 1 // Sony\r
-#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.\r
-#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung\r
-#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita\r
-#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)\r
-#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba\r
-#define IRMP_RC5_PROTOCOL 7 // Philips etc\r
-#define IRMP_DENON_PROTOCOL 8 // Denon\r
-#define IRMP_RC6_PROTOCOL 9 // Philips etc\r
-#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37\r
-#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC\r
-#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba\r
-#define IRMP_NUBERT_PROTOCOL 13 // Nubert\r
-#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen\r
-#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig\r
-#define IRMP_NOKIA_PROTOCOL 16 // Nokia\r
-#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset\r
-#define IRMP_FDC_PROTOCOL 18 // FDC keyboard - protocol 2\r
-#define IRMP_RCCAR_PROTOCOL 19 // RC Car\r
+#define IRMP_SIRCS_PROTOCOL 1 // Sony\r
+#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.\r
+#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung\r
+#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita\r
+#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)\r
+#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba\r
+#define IRMP_RC5_PROTOCOL 7 // Philips etc\r
+#define IRMP_DENON_PROTOCOL 8 // Denon, Sharp\r
+#define IRMP_RC6_PROTOCOL 9 // Philips etc\r
+#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37\r
+#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC\r
+#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba\r
+#define IRMP_NUBERT_PROTOCOL 13 // Nubert\r
+#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen\r
+#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig\r
+#define IRMP_NOKIA_PROTOCOL 16 // Nokia\r
+#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset\r
+#define IRMP_FDC_PROTOCOL 18 // FDC keyboard\r
+#define IRMP_RCCAR_PROTOCOL 19 // RC Car\r
+#define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)\r
+#define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX\r
+#define IRMP_NIKON_PROTOCOL 22 // Nikon\r
+#define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver\r
+#define IRMP_IR60_PROTOCOL 24 // IR60 (SAB2008)\r
+#define IRMP_KATHREIN_PROTOCOL 25 // Kathrein\r
+#define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)\r
+#define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)\r
+#define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits\r
+#define IRMP_LEGO_PROTOCOL 29 // LEGO Power Functions RC\r
+#define IRMP_THOMSON_PROTOCOL 30 // Thomson\r
+\r
+#define IRMP_N_PROTOCOLS 30 // number of supported protocols\r
\r
// some flags of struct IRMP_PARAMETER:\r
#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01\r
#define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02\r
+#define IRMP_PARAM_FLAG_IS_SERIAL 0x04\r
\r
#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause\r
#define NEC_LSB 1 // LSB...MSB\r
#define NEC_FLAGS 0 // flags\r
\r
+#define NEC42_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NEC42_ADDRESS_LEN 13 // read 13 address bits\r
+#define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)\r
+#define NEC42_COMMAND_LEN 8 // read 8 command bits\r
+#define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)\r
+\r
+#define NEC16_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NEC16_ADDRESS_LEN 8 // read 8 address bits\r
+#define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)\r
+#define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)\r
+#define NEC16_COMPLETE_DATA_LEN 16 // complete length\r
+\r
#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse\r
#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse\r
-#define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause\r
-#define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause\r
-#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define SAMSUNG_1_PAUSE_TIME 1650.0e-6 // 1650 usec pause\r
+#define SAMSUNG_0_PAUSE_TIME 550.0e-6 // 550 usec pause\r
+\r
+#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits\r
#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits\r
#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit\r
#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits\r
#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits\r
#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length\r
-#define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times\r
+#define SAMSUNG32_FRAMES 1 // SAMSUNG32 sends each frame 1 times\r
#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms\r
-#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms\r
+#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms\r
\r
#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse\r
#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause\r
#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse\r
#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause\r
#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause\r
-#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms\r
+#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms\r
#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits\r
#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits\r
#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)\r
#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length\r
#define KASEIKYO_STOP_BIT 1 // has stop bit\r
#define KASEIKYO_LSB 1 // LSB...MSB?\r
+#define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times\r
#define KASEIKYO_FLAGS 0 // flags\r
\r
#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse\r
#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
+#define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)\r
#define RECS80_ADDRESS_LEN 3 // read 3 address bits\r
-#define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address)\r
+#define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)\r
#define RECS80_COMMAND_LEN 6 // read 6 command bits\r
-#define RECS80_COMPLETE_DATA_LEN 11 // complete length\r
+#define RECS80_COMPLETE_DATA_LEN 10 // complete length\r
#define RECS80_STOP_BIT 1 // has stop bit\r
#define RECS80_LSB 0 // MSB...LSB\r
#define RECS80_FLAGS 0 // flags\r
\r
#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RC5_ADDRESS_LEN 5 // read 5 address bits\r
+\r
+#define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)\r
+#define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits\r
#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
#define RC5_COMMAND_LEN 6 // read 6 command bits\r
#define RC5_COMPLETE_DATA_LEN 13 // complete length\r
#define RC5_LSB 0 // MSB...LSB\r
#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags\r
\r
-#define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse\r
-#define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause\r
-#define DENON_0_PAUSE_TIME 775.0e-6 // 775 usec pause\r
+#define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory\r
+#define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory\r
+#define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory\r
#define DENON_FRAMES 2 // DENON sends each frame 2 times\r
#define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms\r
#define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms\r
#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits\r
+#define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits\r
#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)\r
#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits\r
#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length\r
#define BANG_OLUFSEN_LSB 0 // MSB...LSB\r
#define BANG_OLUFSEN_FLAGS 0 // flags\r
\r
-#define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
-#define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
-#define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
-#define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit\r
-#define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB\r
-#define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+#define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
+#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
+#define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
+#define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit\r
+#define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB\r
+#define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
\r
#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times\r
-#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
+#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
#define GRUNDIG_ADDRESS_OFFSET 0 // no address\r
#define GRUNDIG_ADDRESS_LEN 0 // no address\r
#define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit\r
#define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits\r
\r
#define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times\r
-#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
+#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
#define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)\r
#define NOKIA_ADDRESS_LEN 8 // 7 address bits\r
#define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)\r
#define NOKIA_COMMAND_LEN 8 // read 8 command bits\r
#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits\r
\r
-#define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause\r
-#define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits\r
-#define SIEMENS_ADDRESS_LEN 12 // read 12 address bits\r
-#define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit)\r
-#define SIEMENS_COMMAND_LEN 7 // read 7 command bits\r
-#define SIEMENS_COMPLETE_DATA_LEN 23 // complete length\r
-#define SIEMENS_STOP_BIT 0 // has no stop bit\r
-#define SIEMENS_LSB 0 // MSB...LSB\r
-#define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
-\r
-#define FDC_START_BIT_PULSE_TIME 2120.0e-6 // 2120 usec pulse\r
-#define FDC_START_BIT_PAUSE_TIME 900.0e-6 // 900 usec pause\r
-#define FDC_PULSE_TIME 360.0e-6 // 360 usec pulse\r
-#define FDC_1_PAUSE_TIME 650.0e-6 // 650 usec pause\r
-#define FDC_0_PAUSE_TIME 180.0e-6 // 180 usec pause\r
-#define FDC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms\r
+#define IR60_FRAMES 2 // IR60 sends each frame 1+1 times\r
+#define IR60_AUTO_REPETITION_PAUSE_TIME 22.2e-3 // repetition after 22.2ms\r
+#define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60\r
+#define IR60_ADDRESS_OFFSET 0 // skip 1 bits\r
+#define IR60_ADDRESS_LEN 0 // read 0 address bits\r
+#define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)\r
+#define IR60_COMMAND_LEN 7 // read 6 command bits\r
+#define IR60_COMPLETE_DATA_LEN 7 // complete length\r
+\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause\r
+#define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit\r
+#define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB\r
+#define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+\r
+#define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define RUWIDO_ADDRESS_LEN 9 // read 9 address bits\r
+#define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits\r
+#define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit\r
+#define RUWIDO_COMPLETE_DATA_LEN 17 // complete length\r
+\r
+#define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define SIEMENS_ADDRESS_LEN 11 // read 11 bits\r
+#define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits\r
+#define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit\r
+#define SIEMENS_COMPLETE_DATA_LEN 22 // complete length\r
+\r
+#define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse\r
+#define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause\r
+#define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse\r
+#define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause\r
+#define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause\r
+#define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms\r
#define FDC_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define FDC_ADDRESS_LEN 8 // read 8 address bits\r
-#define FDC_COMMAND_OFFSET 24 // skip 24 bits (8 address bits + 12 status bits + 4 repeat bits)\r
-#define FDC_COMMAND_LEN 8 // read 8 bits\r
+#define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command\r
+#define FDC_COMMAND_OFFSET 20 // skip 20 bits\r
+#define FDC_COMMAND_LEN 12 // read 12 bits\r
#define FDC_COMPLETE_DATA_LEN 40 // complete length\r
#define FDC_STOP_BIT 1 // has stop bit\r
#define FDC_LSB 1 // LSB...MSB\r
#define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause\r
#define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms\r
#define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits\r
-#define RCCAR_ADDRESS_LEN 0 // read 8 address bits\r
-#define RCCAR_COMMAND_OFFSET 0 // skip 24 bits (8 address bits + 12 status bits + 4 repeat bits)\r
-#define RCCAR_COMMAND_LEN 13 // read 8 bits\r
+#define RCCAR_ADDRESS_LEN 0 // read 0 address bits\r
+#define RCCAR_COMMAND_OFFSET 0 // skip 0 bits\r
+#define RCCAR_COMMAND_LEN 13 // read 13 bits\r
#define RCCAR_COMPLETE_DATA_LEN 13 // complete length\r
#define RCCAR_STOP_BIT 1 // has stop bit\r
#define RCCAR_LSB 1 // LSB...MSB\r
#define RCCAR_FLAGS 0 // flags\r
\r
-#define AUTO_FRAME_REPETITION_TIME 50.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms\r
+#define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse\r
+#define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
+#define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse\r
+#define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause\r
+#define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause\r
+#define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms\r
+#define JVC_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define JVC_ADDRESS_LEN 4 // read 4 address bits\r
+#define JVC_COMMAND_OFFSET 4 // skip 4 bits\r
+#define JVC_COMMAND_LEN 12 // read 12 bits\r
+#define JVC_COMPLETE_DATA_LEN 16 // complete length\r
+#define JVC_STOP_BIT 1 // has stop bit\r
+#define JVC_LSB 1 // LSB...MSB\r
+#define JVC_FLAGS 0 // flags\r
+\r
+#define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse\r
+#define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause\r
+#define NIKON_PULSE_TIME 500.0e-6 // 500 usec pulse\r
+#define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause\r
+#define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause\r
+#define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms\r
+#define NIKON_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NIKON_ADDRESS_LEN 0 // read 0 address bits\r
+#define NIKON_COMMAND_OFFSET 0 // skip 0 bits\r
+#define NIKON_COMMAND_LEN 2 // read 2 bits\r
+#define NIKON_COMPLETE_DATA_LEN 2 // complete length\r
+#define NIKON_STOP_BIT 1 // has stop bit\r
+#define NIKON_LSB 0 // LSB...MSB\r
+#define NIKON_FLAGS 0 // flags\r
+\r
+#define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
+#define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause\r
+#define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
+#define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause\r
+#define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse\r
+#define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause\r
+#define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)\r
+#define KATHREIN_FRAMES 1 // Kathrein sends 1 frame\r
+#define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
+#define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits\r
+#define KATHREIN_ADDRESS_LEN 4 // read 4 address bits\r
+#define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits\r
+#define KATHREIN_COMMAND_LEN 7 // read 7 bits\r
+#define KATHREIN_COMPLETE_DATA_LEN 13 // complete length\r
+#define KATHREIN_STOP_BIT 1 // has stop bit\r
+#define KATHREIN_LSB 0 // MSB\r
+#define KATHREIN_FLAGS 0 // flags\r
+\r
+#define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
+#define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause\r
+#define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse\r
+#define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause\r
+#define NETBOX_FRAMES 1 // Netbox sends 1 frame\r
+#define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
+#define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NETBOX_ADDRESS_LEN 3 // read 3 address bits\r
+#define NETBOX_COMMAND_OFFSET 3 // skip 3 bits\r
+#define NETBOX_COMMAND_LEN 13 // read 13 bits\r
+#define NETBOX_COMPLETE_DATA_LEN 16 // complete length\r
+#define NETBOX_STOP_BIT 0 // has no stop bit\r
+#define NETBOX_LSB 1 // LSB\r
+#define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags\r
+\r
+#define LEGO_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)\r
+#define LEGO_START_BIT_PAUSE_TIME 1026.0e-6 // 1026 usec pause (39 x 1/38kHz)\r
+#define LEGO_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)\r
+#define LEGO_1_PAUSE_TIME 553.0e-6 // 553 usec pause (21 x 1/38kHz)\r
+#define LEGO_0_PAUSE_TIME 263.0e-6 // 263 usec pause (10 x 1/38kHz)\r
+#define LEGO_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms\r
+#define LEGO_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define LEGO_ADDRESS_LEN 0 // read 0 address bits\r
+#define LEGO_COMMAND_OFFSET 0 // skip 0 bits\r
+#define LEGO_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)\r
+#define LEGO_COMPLETE_DATA_LEN 16 // complete length\r
+#define LEGO_STOP_BIT 1 // has stop bit\r
+#define LEGO_LSB 0 // MSB...LSB\r
+#define LEGO_FLAGS 0 // flags\r
+\r
+#define THOMSON_PULSE_TIME 550.0e-6 // 550 usec pulse\r
+#define THOMSON_1_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
+#define THOMSON_0_PAUSE_TIME 2000.0e-6 // 2000 usec pause\r
+#define THOMSON_FRAMES 1 // THOMSON sends 1 frame\r
+#define THOMSON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // repetition after 65ms\r
+#define THOMSON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms\r
+#define THOMSON_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define THOMSON_ADDRESS_LEN 4 // read 4 address bits\r
+#define THOMSON_COMMAND_OFFSET 5 // skip 4 address bits + 1 toggle bit\r
+#define THOMSON_COMMAND_LEN 7 // read 7 command bits\r
+#define THOMSON_COMPLETE_DATA_LEN 12 // complete length\r
+#define THOMSON_STOP_BIT 1 // has stop bit\r
+#define THOMSON_LSB 0 // MSB...LSB\r
+#define THOMSON_FLAGS 0 // flags\r
+\r
+#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms\r
+ // KASEIKYO: automatic repetition after 75ms\r
\r
#define TRUE 1\r
#define FALSE 0\r
uint8_t flags; // flags, e.g. repetition\r
} IRMP_DATA;\r
\r
+extern void irmp_init (void);\r
+extern uint8_t irmp_get_data (IRMP_DATA *);\r
+extern uint8_t irmp_is_busy (void);\r
+extern uint8_t irmp_ISR (void);\r
\r
-/**\r
- * Initialize IRMP decoder\r
- * @details Configures IRMP input pin\r
- */\r
-extern void irmp_init (void);\r
-\r
-/**\r
- * Get IRMP data\r
- * @details gets decoded IRMP data\r
- * @param pointer in order to store IRMP data\r
- * @return TRUE: successful, FALSE: failed\r
- */\r
-extern uint8_t irmp_get_data (IRMP_DATA *);\r
-\r
-/**\r
- * ISR routine\r
- * @details ISR routine, called 10000 times per second\r
- */\r
-extern uint8_t irmp_ISR (void);\r
-\r
-#ifdef __cplusplus\r
-}\r
+#if IRMP_PROTOCOL_NAMES == 1\r
+extern char * irmp_protocol_names[IRMP_N_PROTOCOLS + 1];\r
#endif\r
\r
+#if IRMP_USE_CALLBACK == 1\r
+extern void irmp_set_callback_ptr (void (*cb)(uint8_t));\r
+#endif // IRSND_USE_CALLBACK == 1\r
+\r
#endif /* _WC_IRMP_H_ */\r
projects / irmp.git / blobdiff