/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* irmp.c - infrared multi-protocol decoder, supports several remote control protocols\r
*\r
- * Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2009-2014 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmp.c,v 1.152 2014/07/01 08:33:10 fm Exp $\r
+ * $Id: irmp.c,v 1.161 2014/07/21 08:58:58 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#if defined(UNIX_OR_WINDOWS) || IRMP_PROTOCOL_NAMES == 1\r
-char *\r
+const char *\r
irmp_protocol_names[IRMP_N_PROTOCOLS + 1] =\r
{\r
"UNKNOWN",\r
"RCMM12",\r
"SPEAKER",\r
"LGAIR",\r
+ "SAMSG48",\r
"RADIO1"\r
};\r
\r
*/\r
#if IRMP_LOGGING == 1 // logging via UART\r
\r
-#if IRMP_EXT_LOGGING == 1 // use external logging\r
-#include "irmpextlog.h"\r
-#else // normal UART log (IRMP_EXT_LOGGING == 0)\r
-#define BAUD 9600L\r
-#ifndef UNIX_OR_WINDOWS\r
-#include <util/setbaud.h>\r
-#endif\r
+#if defined(ARM_STM32F4XX)\r
+# define STM32_GPIO_CLOCK RCC_AHB1Periph_GPIOA // per UART2 an PA2\r
+# define STM32_UART_CLOCK RCC_APB1Periph_USART2\r
+# define STM32_GPIO_PORT GPIOA\r
+# define STM32_GPIO_PIN GPIO_Pin_2\r
+# define STM32_GPIO_SOURCE GPIO_PinSource2\r
+# define STM32_UART_AF GPIO_AF_USART2\r
+# define STM32_UART_COM USART2\r
+# define STM32_UART_BAUD 115200 // mit 115200 Baud\r
+# include "stm32f4xx_usart.h"\r
+#else\r
+# if IRMP_EXT_LOGGING == 1 // use external logging\r
+# include "irmpextlog.h"\r
+# else // normal UART log (IRMP_EXT_LOGGING == 0)\r
+# define BAUD 9600L\r
+# ifndef UNIX_OR_WINDOWS\r
+# include <util/setbaud.h>\r
+# endif\r
\r
#ifdef UBRR0H\r
\r
\r
#endif //UBRR0H\r
#endif //IRMP_EXT_LOGGING\r
+#endif //ARM_STM32F4XX\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Initialize UART\r
irmp_uart_init (void)\r
{\r
#ifndef UNIX_OR_WINDOWS\r
+#if defined(ARM_STM32F4XX)\r
+ GPIO_InitTypeDef GPIO_InitStructure;\r
+ USART_InitTypeDef USART_InitStructure;\r
+\r
+ // Clock enable vom TX Pin\r
+ RCC_AHB1PeriphClockCmd(STM32_GPIO_CLOCK, ENABLE);\r
+\r
+ // Clock enable der UART\r
+ RCC_APB1PeriphClockCmd(STM32_UART_CLOCK, ENABLE);\r
+\r
+ // UART Alternative-Funktion mit dem IO-Pin verbinden\r
+ GPIO_PinAFConfig(STM32_GPIO_PORT,STM32_GPIO_SOURCE,STM32_UART_AF);\r
+\r
+ // UART als Alternative-Funktion mit PushPull\r
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;\r
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;\r
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;\r
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;\r
+\r
+ // TX-Pin\r
+ GPIO_InitStructure.GPIO_Pin = STM32_GPIO_PIN;\r
+ GPIO_Init(STM32_GPIO_PORT, &GPIO_InitStructure);\r
+\r
+ // Oversampling\r
+ USART_OverSampling8Cmd(STM32_UART_COM, ENABLE);\r
+\r
+ // init mit Baudrate, 8Databits, 1Stopbit, keine Parität, kein RTS+CTS\r
+ USART_InitStructure.USART_BaudRate = STM32_UART_BAUD;\r
+ USART_InitStructure.USART_WordLength = USART_WordLength_8b;\r
+ USART_InitStructure.USART_StopBits = USART_StopBits_1;\r
+ USART_InitStructure.USART_Parity = USART_Parity_No;\r
+ USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;\r
+ USART_InitStructure.USART_Mode = USART_Mode_Tx;\r
+ USART_Init(STM32_UART_COM, &USART_InitStructure);\r
+\r
+ // UART enable\r
+ USART_Cmd(STM32_UART_COM, ENABLE);\r
+\r
+#else\r
#if (IRMP_EXT_LOGGING == 0) // use UART\r
UART0_UBRRH = UBRRH_VALUE; // set baud rate\r
UART0_UBRRL = UBRRL_VALUE;\r
UART0_UCSRC = UART0_UCSZ1_BIT_VALUE | UART0_UCSZ0_BIT_VALUE | UART0_URSEL_BIT_VALUE;\r
UART0_UCSRB |= UART0_TXEN_BIT_VALUE; // enable UART TX\r
#else // other log method\r
- initextlog(); \r
+ initextlog(); \r
#endif //IRMP_EXT_LOGGING\r
+#endif //ARM_STM32F4XX\r
#endif // UNIX_OR_WINDOWS\r
}\r
\r
irmp_uart_putc (unsigned char ch)\r
{\r
#ifndef UNIX_OR_WINDOWS\r
+#if defined(ARM_STM32F4XX)\r
+ // warten bis altes Byte gesendet wurde\r
+ while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET)\r
+ {\r
+ ;\r
+ }\r
+\r
+ USART_SendData(STM32_UART_COM, ch);\r
+\r
+ if (ch == '\n')\r
+ {\r
+ while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET);\r
+ USART_SendData(STM32_UART_COM, '\r');\r
+ }\r
+\r
+#else\r
#if (IRMP_EXT_LOGGING == 0)\r
+\r
while (!(UART0_UCSRA & UART0_UDRE_BIT_VALUE))\r
{\r
;\r
}\r
\r
UART0_UDR = ch;\r
+\r
#else\r
- sendextlog(ch); //Use external log\r
-#endif\r
+\r
+ sendextlog(ch); // use external log\r
+\r
+#endif //IRMP_EXT_LOGGING\r
+#endif //ARM_STM32F4XX\r
#else\r
fputc (ch, stderr);\r
#endif // UNIX_OR_WINDOWS\r
rtc = TRUE;\r
}\r
break;\r
+\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+ case IRMP_SAMSUNG48_PROTOCOL:\r
+ irmp_command = (irmp_command & 0x00FF) | ((irmp_id & 0x00FF) << 8);\r
+ rtc = TRUE;\r
+ break;\r
+#endif\r
#endif\r
+\r
#if IRMP_SUPPORT_NEC_PROTOCOL == 1\r
case IRMP_NEC_PROTOCOL:\r
if ((irmp_command >> 8) == (~irmp_command & 0x00FF))\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to APPLE protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_protocol = IRMP_APPLE_PROTOCOL;\r
irmp_address = (irmp_command & 0xFF00) >> 8;\r
irmp_command &= 0x00FF;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF("Info IR60: got start instruction frame\n");\r
-#endif\r
+#endif // ANALYZE\r
}\r
break;\r
#endif\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF("error NETBOX: bit6/7 must be 0/1\n");\r
-#endif\r
+#endif // ANALYZE\r
}\r
}\r
else\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF("error NETBOX: last bit not set\n");\r
-#endif\r
+#endif // ANALYZE\r
}\r
break;\r
#endif\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("CRC error in LEGO protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
// rtc = TRUE; // don't accept codes with CRC errors\r
}\r
break;\r
static uint16_t irmp_tmp_address; // ir address\r
static uint16_t irmp_tmp_command; // ir command\r
\r
-#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+#if (IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
static uint16_t irmp_tmp_address2; // ir address\r
static uint16_t irmp_tmp_command2; // ir command\r
#endif\r
{\r
if (irmp_param.lsb_first)\r
{\r
- irmp_tmp_command |= (((uint16_t) (value)) << (irmp_bit - irmp_param.command_offset)); // CV wants cast\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+ if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit >= 32)\r
+ {\r
+ irmp_tmp_id |= (((uint16_t) (value)) << (irmp_bit - 32)); // CV wants cast\r
+ }\r
+ else\r
+#endif\r
+ {\r
+ irmp_tmp_command |= (((uint16_t) (value)) << (irmp_bit - irmp_param.command_offset)); // CV wants cast\r
+ }\r
}\r
else\r
{\r
\r
#ifdef ANALYZE\r
time_counter++;\r
-#endif\r
+#endif // ANALYZE\r
\r
irmp_input = input(IRMP_PIN);\r
\r
#ifdef ANALYZE\r
if (! irmp_pulse_time)\r
{\r
-#ifdef ANALYZE\r
ANALYZE_PRINTF("%8.3fms [starting pulse]\n", (double) (time_counter * 1000) / F_INTERRUPTS);\r
-#endif\r
}\r
-#endif\r
+#endif // ANALYZE\r
irmp_pulse_time++; // increment counter\r
}\r
else\r
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1\r
genre2 = 0;\r
#endif\r
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
+ irmp_tmp_id = 0;\r
+#endif\r
\r
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
irmp_tmp_command2 = 0;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms warning: did not receive inverted command repetition\n",\r
-#endif\r
(double) (time_counter * 1000) / F_INTERRUPTS);\r
+#endif // ANALYZE\r
last_irmp_denon_command = 0;\r
denon_repetition_len = 0xFFFF;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms error 1: pause after start bit pulse %d too long: %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
+#endif // ANALYZE\r
}\r
-// irmp_busy_flag = FALSE;\r
+\r
irmp_start_bit_detected = 0; // reset flags, let's wait for another start bit\r
irmp_pulse_time = 0;\r
irmp_pause_time = 0;\r
\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms [start-bit: pulse = %2d, pause = %2d]\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);\r
-#endif\r
+#endif // ANALYZE\r
\r
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1\r
if (irmp_pulse_time >= SIRCS_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIRCS_START_BIT_PULSE_LEN_MAX &&\r
ANALYZE_PRINTF ("protocol = SIRCS, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
SIRCS_START_BIT_PULSE_LEN_MIN, SIRCS_START_BIT_PULSE_LEN_MAX,\r
SIRCS_START_BIT_PAUSE_LEN_MIN, SIRCS_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) (IRMP_PARAMETER *) &sircs_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = NEC or JVC (type 1) repeat frame, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
JVC_START_BIT_PULSE_LEN_MIN, JVC_START_BIT_PULSE_LEN_MAX,\r
JVC_REPEAT_START_BIT_PAUSE_LEN_MIN, JVC_REPEAT_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = NEC42, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &nec42_param;\r
#else\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("protocol = NEC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
#endif\r
}\r
ANALYZE_PRINTF ("protocol = JVC repeat frame type 2, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = NEC (repetition frame), start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
\r
irmp_param_p = (IRMP_PARAMETER *) &nec_rep_param;\r
}\r
ANALYZE_PRINTF ("protocol = JVC repeat frame type 3, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
NEC_0_PAUSE_LEN_MIN, NEC_0_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = TELEFUNKEN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
TELEFUNKEN_START_BIT_PULSE_LEN_MIN, TELEFUNKEN_START_BIT_PULSE_LEN_MAX,\r
TELEFUNKEN_START_BIT_PAUSE_LEN_MIN, TELEFUNKEN_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &telefunken_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = ROOMBA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
ROOMBA_START_BIT_PULSE_LEN_MIN, ROOMBA_START_BIT_PULSE_LEN_MAX,\r
ROOMBA_START_BIT_PAUSE_LEN_MIN, ROOMBA_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &roomba_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = NIKON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NIKON_START_BIT_PULSE_LEN_MIN, NIKON_START_BIT_PULSE_LEN_MAX,\r
NIKON_START_BIT_PAUSE_LEN_MIN, NIKON_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &nikon_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = SAMSUNG, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
SAMSUNG_START_BIT_PULSE_LEN_MIN, SAMSUNG_START_BIT_PULSE_LEN_MAX,\r
SAMSUNG_START_BIT_PAUSE_LEN_MIN, SAMSUNG_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &samsung_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = MATSUSHITA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
MATSUSHITA_START_BIT_PULSE_LEN_MIN, MATSUSHITA_START_BIT_PULSE_LEN_MAX,\r
MATSUSHITA_START_BIT_PAUSE_LEN_MIN, MATSUSHITA_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &matsushita_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = KASEIKYO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
KASEIKYO_START_BIT_PULSE_LEN_MIN, KASEIKYO_START_BIT_PULSE_LEN_MAX,\r
KASEIKYO_START_BIT_PAUSE_LEN_MIN, KASEIKYO_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &kaseikyo_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = RADIO1, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RADIO1_START_BIT_PULSE_LEN_MIN, RADIO1_START_BIT_PULSE_LEN_MAX,\r
RADIO1_START_BIT_PAUSE_LEN_MIN, RADIO1_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &radio1_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = RECS80, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RECS80_START_BIT_PULSE_LEN_MIN, RECS80_START_BIT_PULSE_LEN_MAX,\r
RECS80_START_BIT_PAUSE_LEN_MIN, RECS80_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &recs80_param;\r
}\r
else\r
ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,\r
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
memcpy_P (&irmp_param2, &fdc_param, sizeof (IRMP_PARAMETER));\r
}\r
else\r
ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,\r
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
memcpy_P (&irmp_param2, &rccar_param, sizeof (IRMP_PARAMETER));\r
}\r
else\r
2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX,\r
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,\r
2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
}\r
\r
irmp_param_p = (IRMP_PARAMETER *) &rc5_param;\r
DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX,\r
DENON_1_PAUSE_LEN_MIN, DENON_1_PAUSE_LEN_MAX,\r
DENON_0_PAUSE_LEN_MIN, DENON_0_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &denon_param;\r
}\r
else\r
THOMSON_PULSE_LEN_MIN, THOMSON_PULSE_LEN_MAX,\r
THOMSON_1_PAUSE_LEN_MIN, THOMSON_1_PAUSE_LEN_MAX,\r
THOMSON_0_PAUSE_LEN_MIN, THOMSON_0_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &thomson_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = BOSE, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
BOSE_START_BIT_PULSE_LEN_MIN, BOSE_START_BIT_PULSE_LEN_MAX,\r
BOSE_START_BIT_PAUSE_LEN_MIN, BOSE_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &bose_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = RC6, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RC6_START_BIT_PULSE_LEN_MIN, RC6_START_BIT_PULSE_LEN_MAX,\r
RC6_START_BIT_PAUSE_LEN_MIN, RC6_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &rc6_param;\r
last_pause = 0;\r
last_value = 1;\r
ANALYZE_PRINTF ("protocol = RECS80EXT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RECS80EXT_START_BIT_PULSE_LEN_MIN, RECS80EXT_START_BIT_PULSE_LEN_MAX,\r
RECS80EXT_START_BIT_PAUSE_LEN_MIN, RECS80EXT_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &recs80ext_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = NUBERT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NUBERT_START_BIT_PULSE_LEN_MIN, NUBERT_START_BIT_PULSE_LEN_MAX,\r
NUBERT_START_BIT_PAUSE_LEN_MIN, NUBERT_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &nubert_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = SPEAKER, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
SPEAKER_START_BIT_PULSE_LEN_MIN, SPEAKER_START_BIT_PULSE_LEN_MAX,\r
SPEAKER_START_BIT_PAUSE_LEN_MIN, SPEAKER_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &speaker_param;\r
}\r
else\r
ANALYZE_PRINTF ("start bit 4 timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX,\r
BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &bang_olufsen_param;\r
last_value = 0;\r
}\r
ANALYZE_PRINTF ("protocol = GRUNDIG, pre bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN, GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX,\r
GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN, GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &grundig_param;\r
last_pause = irmp_pause_time;\r
last_value = 1;\r
2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX,\r
SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN, SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX,\r
2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &ruwido_param;\r
last_pause = irmp_pause_time;\r
last_value = 1;\r
ANALYZE_PRINTF ("protocol = FDC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX,\r
FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &fdc_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = RCCAR, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX,\r
RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &rccar_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = KATHREIN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
KATHREIN_START_BIT_PULSE_LEN_MIN, KATHREIN_START_BIT_PULSE_LEN_MAX,\r
KATHREIN_START_BIT_PAUSE_LEN_MIN, KATHREIN_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &kathrein_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = NETBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NETBOX_START_BIT_PULSE_LEN_MIN, NETBOX_START_BIT_PULSE_LEN_MAX,\r
NETBOX_START_BIT_PAUSE_LEN_MIN, NETBOX_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &netbox_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = LEGO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
LEGO_START_BIT_PULSE_LEN_MIN, LEGO_START_BIT_PULSE_LEN_MAX,\r
LEGO_START_BIT_PAUSE_LEN_MIN, LEGO_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &lego_param;\r
}\r
else\r
ANALYZE_PRINTF ("protocol = A1TVBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
A1TVBOX_START_BIT_PULSE_LEN_MIN, A1TVBOX_START_BIT_PULSE_LEN_MAX,\r
A1TVBOX_START_BIT_PAUSE_LEN_MIN, A1TVBOX_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &a1tvbox_param;\r
last_pause = 0;\r
last_value = 1;\r
ANALYZE_PRINTF ("protocol = ORTEK, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
ORTEK_START_BIT_PULSE_LEN_MIN, ORTEK_START_BIT_PULSE_LEN_MAX,\r
ORTEK_START_BIT_PAUSE_LEN_MIN, ORTEK_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &ortek_param;\r
last_pause = 0;\r
last_value = 1;\r
ANALYZE_PRINTF ("protocol = RCMM, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
RCMM32_START_BIT_PULSE_LEN_MIN, RCMM32_START_BIT_PULSE_LEN_MAX,\r
RCMM32_START_BIT_PAUSE_LEN_MIN, RCMM32_START_BIT_PAUSE_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param_p = (IRMP_PARAMETER *) &rcmm_param;\r
}\r
else\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("protocol = UNKNOWN\n");\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // wait for another start bit...\r
}\r
\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max);\r
ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max);\r
-#endif\r
+#endif // ANALYZE\r
}\r
else\r
{\r
2 * irmp_param.pulse_1_len_min, 2 * irmp_param.pulse_1_len_max);\r
ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max,\r
2 * irmp_param.pause_1_len_min, 2 * irmp_param.pause_1_len_max);\r
-#endif\r
+#endif // ANALYZE\r
}\r
\r
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param2.pause_0_len_min, irmp_param2.pause_0_len_max);\r
ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param2.pulse_1_len_min, irmp_param2.pulse_1_len_max);\r
ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param2.pause_1_len_min, irmp_param2.pause_1_len_max);\r
-#endif\r
+#endif // ANALYZE\r
}\r
#endif\r
\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("pulse_toggle: %3d - %3d\n", RC6_TOGGLE_BIT_LEN_MIN, RC6_TOGGLE_BIT_LEN_MAX);\r
-#endif\r
+#endif // ANALYZE\r
}\r
#endif\r
\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);\r
ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max);\r
-#endif\r
+#endif // ANALYZE\r
}\r
else\r
{\r
2 * irmp_param.pulse_0_len_min, 2 * irmp_param.pulse_0_len_max);\r
ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max,\r
2 * irmp_param.pause_0_len_min, 2 * irmp_param.pause_0_len_max);\r
-#endif\r
+#endif // ANALYZE\r
}\r
\r
+#ifdef ANALYZE\r
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1\r
if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL)\r
{\r
-#ifdef ANALYZE\r
ANALYZE_PRINTF ("pulse_r: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);\r
ANALYZE_PRINTF ("pause_r: %3d - %3d\n", BANG_OLUFSEN_R_PAUSE_LEN_MIN, BANG_OLUFSEN_R_PAUSE_LEN_MAX);\r
-#endif\r
}\r
#endif\r
\r
-#ifdef ANALYZE\r
ANALYZE_PRINTF ("command_offset: %2d\n", irmp_param.command_offset);\r
ANALYZE_PRINTF ("command_len: %3d\n", irmp_param.command_end - irmp_param.command_offset);\r
ANALYZE_PRINTF ("complete_len: %3d\n", irmp_param.complete_len);\r
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1);\r
}\r
else if (! last_value) // && irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max)\r
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0);\r
}\r
}\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
-#endif\r
+#endif // ANALYZE\r
\r
if (irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX)\r
{ // pause timings correct for "1"?\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1'); // yes, store 1\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
}\r
else // if (irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX)\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0'); // yes, store 0\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
}\r
}\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
-#endif\r
+#endif // ANALYZE\r
\r
if (irmp_pause_time >= THOMSON_1_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_1_PAUSE_LEN_MAX)\r
{ // pause timings correct for "1"?\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1'); // yes, store 1\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
}\r
else // if (irmp_pause_time >= THOMSON_0_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_0_PAUSE_LEN_MAX)\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0'); // yes, store 0\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
}\r
}\r
#ifdef ANALYZE\r
if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))\r
{\r
-#ifdef ANALYZE\r
ANALYZE_PRINTF ("stop bit detected\n");\r
-#endif\r
}\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.stop_bit = 0;\r
}\r
else\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error: stop bit timing wrong, irmp_bit = %d, irmp_pulse_time = %d, pulse_0_len_min = %d, pulse_0_len_max = %d\n",\r
-#endif\r
irmp_bit, irmp_pulse_time, irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);\r
-\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // wait for another start bit...\r
irmp_pulse_time = 0;\r
irmp_pause_time = 0;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to IR60 protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
got_light = TRUE; // this is a lie, but generates a stop bit ;-)\r
irmp_param.stop_bit = TRUE; // set flag\r
\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to NOKIA protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.protocol = IRMP_NOKIA_PROTOCOL; // change protocol\r
irmp_param.address_offset = NOKIA_ADDRESS_OFFSET;\r
irmp_param.address_end = NOKIA_ADDRESS_OFFSET + NOKIA_ADDRESS_LEN;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to SIEMENS protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.protocol = IRMP_SIEMENS_PROTOCOL; // change protocol\r
irmp_param.address_offset = SIEMENS_ADDRESS_OFFSET;\r
irmp_param.address_end = SIEMENS_ADDRESS_OFFSET + SIEMENS_ADDRESS_LEN;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.stop_bit = TRUE; // set flag\r
irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol\r
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to LGAIR protocol, irmp_bit = %d\n", irmp_bit);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.stop_bit = TRUE; // set flag\r
irmp_param.protocol = IRMP_LGAIR_PROTOCOL; // switch protocol\r
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to NEC protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.stop_bit = TRUE; // set flag\r
irmp_param.protocol = IRMP_NEC_PROTOCOL; // switch protocol\r
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to LGAIR protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.stop_bit = TRUE; // set flag\r
irmp_param.protocol = IRMP_LGAIR_PROTOCOL; // switch protocol\r
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.stop_bit = TRUE; // set flag\r
irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol\r
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17\r
}\r
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
#endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+ else if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit == 32) // it was a SAMSUNG32 stop bit\r
+ {\r
+#ifdef ANALYZE\r
+ ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol\n");\r
+#endif // ANALYZE\r
+ irmp_param.protocol = IRMP_SAMSUNG32_PROTOCOL;\r
+ irmp_param.command_offset = SAMSUNG32_COMMAND_OFFSET;\r
+ irmp_param.command_end = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;\r
+ irmp_param.complete_len = SAMSUNG32_COMPLETE_DATA_LEN;\r
+ }\r
+#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
+\r
#if IRMP_SUPPORT_RCMM_PROTOCOL == 1\r
else if (irmp_param.protocol == IRMP_RCMM32_PROTOCOL && (irmp_bit == 12 || irmp_bit == 24)) // it was a RCMM stop bit\r
{\r
\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to RCMM12 protocol, irmp_bit = %d\n", irmp_bit);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.protocol = IRMP_RCMM12_PROTOCOL; // switch protocol\r
}\r
else // if ((irmp_bit == 24)\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to RCMM24 protocol, irmp_bit = %d\n", irmp_bit);\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.protocol = IRMP_RCMM24_PROTOCOL; // switch protocol\r
}\r
irmp_param.stop_bit = TRUE; // set flag\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 2: pause %d after data bit %d too long\n", irmp_pause_time, irmp_bit);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // wait for another start bit...\r
irmp_pulse_time = 0;\r
irmp_pause_time = 0;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);\r
-#endif\r
+#endif // ANALYZE\r
\r
#if IRMP_SUPPORT_MANCHESTER == 1\r
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) // Manchester\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('T');\r
-#endif\r
+#endif // ANALYZE\r
if (irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG) // RC6 mode 6A\r
{\r
irmp_store_bit (1);\r
}\r
#ifdef ANALYZE\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
}\r
else\r
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1 );\r
\r
#if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('T');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
\r
if (irmp_pause_time > 2 * irmp_param.pause_1_len_max)\r
}\r
#ifdef ANALYZE\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
}\r
else\r
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0 );\r
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
if (! irmp_param2.protocol)\r
{\r
#ifdef ANALYZE\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
}\r
last_value = (irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0;\r
}\r
\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR (manchester_value + '0');\r
-#endif\r
+#endif // ANALYZE\r
\r
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
if (! irmp_param2.protocol)\r
{\r
#ifdef ANALYZE\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
}\r
\r
#if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to RC6A protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.complete_len = RC6_COMPLETE_DATA_LEN_LONG;\r
irmp_param.address_offset = 5;\r
irmp_param.address_end = irmp_param.address_offset + 15;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('?');\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.protocol = 0; // switch to FDC, see below\r
}\r
else\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('?');\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.protocol = 0; // switch to RCCAR, see below\r
}\r
else\r
ANALYZE_NEWLINE ();\r
ANALYZE_PRINTF ("error 3 manchester: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // reset flags and wait for next start bit\r
irmp_pause_time = 0;\r
}\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF (" 1 (FDC)\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit2 (1);\r
}\r
else if (irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX)\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF (" 0 (FDC)\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit2 (0);\r
}\r
\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to FDC protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));\r
irmp_param2.protocol = 0;\r
irmp_tmp_address = irmp_tmp_address2;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF (" 1 (RCCAR)\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit2 (1);\r
}\r
else if (irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX)\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF (" 0 (RCCAR)\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit2 (0);\r
}\r
\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to RCCAR protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));\r
irmp_param2.protocol = 0;\r
irmp_tmp_address = irmp_tmp_address2;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
\r
if (irmp_pulse_time >= irmp_param.pulse_1_len_min)\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
\r
if (irmp_pause_time >= irmp_param.pause_1_len_min)\r
}\r
#ifdef ANALYZE\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
wait_for_space = 0;\r
}\r
else\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("SYNC\n");\r
-#endif\r
+#endif // ANALYZE\r
wait_for_space = 0;\r
- irmp_tmp_id = 0;\r
irmp_bit++;\r
}\r
else if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX)\r
{\r
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1\r
+#ifdef ANALYZE\r
+ ANALYZE_PRINTF ("Switching to SAMSUNG48 protocol ");\r
+#endif // ANALYZE\r
+ irmp_param.protocol = IRMP_SAMSUNG48_PROTOCOL;\r
+ irmp_param.command_offset = SAMSUNG48_COMMAND_OFFSET;\r
+ irmp_param.command_end = SAMSUNG48_COMMAND_OFFSET + SAMSUNG48_COMMAND_LEN;\r
+ irmp_param.complete_len = SAMSUNG48_COMPLETE_DATA_LEN;\r
+#else\r
+#ifdef ANALYZE\r
+ ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol ");\r
+#endif // ANALYZE\r
irmp_param.protocol = IRMP_SAMSUNG32_PROTOCOL;\r
irmp_param.command_offset = SAMSUNG32_COMMAND_OFFSET;\r
irmp_param.command_end = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;\r
irmp_param.complete_len = SAMSUNG32_COMPLETE_DATA_LEN;\r
-\r
+#endif\r
if (irmp_pause_time >= SAMSUNG_1_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_1_PAUSE_LEN_MAX)\r
{\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
wait_for_space = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
wait_for_space = 0;\r
}\r
-\r
-#ifdef ANALYZE\r
- ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol\n");\r
-#endif\r
}\r
else\r
{ // timing incorrect!\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 3 Samsung: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // reset flags and wait for next start bit\r
irmp_pause_time = 0;\r
}\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Switching to NEC16 protocol\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_param.protocol = IRMP_NEC16_PROTOCOL;\r
irmp_param.address_offset = NEC16_ADDRESS_OFFSET;\r
irmp_param.address_end = NEC16_ADDRESS_OFFSET + NEC16_ADDRESS_LEN;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("3rd start bit\n");\r
-#endif\r
+#endif // ANALYZE\r
wait_for_space = 0;\r
irmp_bit++;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 3a B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // reset flags and wait for next start bit\r
irmp_pause_time = 0;\r
}\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("trailer bit\n");\r
-#endif\r
+#endif // ANALYZE\r
wait_for_space = 0;\r
irmp_bit++;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 3b B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // reset flags and wait for next start bit\r
irmp_pause_time = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
last_value = 1;\r
wait_for_space = 0;\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
last_value = 0;\r
wait_for_space = 0;\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR (last_value + '0');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (last_value);\r
wait_for_space = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 3c B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // reset flags and wait for next start bit\r
irmp_pause_time = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 3d B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // reset flags and wait for next start bit\r
irmp_pause_time = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0');\r
ANALYZE_PUTCHAR ('0');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
irmp_store_bit (0);\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0');\r
ANALYZE_PUTCHAR ('1');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
irmp_store_bit (1);\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1');\r
ANALYZE_PUTCHAR ('0');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
irmp_store_bit (0);\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1');\r
ANALYZE_PUTCHAR ('1');\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
irmp_store_bit (1);\r
}\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("\n");\r
-#endif\r
+#endif // ANALYZE\r
wait_for_space = 0;\r
}\r
else\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('1');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
wait_for_space = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('0');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (0);\r
wait_for_space = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('S');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_tmp_command <<= 1;\r
}\r
else\r
#ifdef ANALYZE\r
ANALYZE_PUTCHAR ('S');\r
ANALYZE_NEWLINE ();\r
-#endif\r
+#endif // ANALYZE\r
irmp_store_bit (1);\r
}\r
wait_for_space = 0;\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 3: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
-// irmp_busy_flag = FALSE;\r
+#endif // ANALYZE\r
irmp_start_bit_detected = 0; // reset flags and wait for next start bit\r
irmp_pause_time = 0;\r
}\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("code skipped: SIRCS auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-#endif\r
+#endif // ANALYZE\r
key_repetition_len = 0;\r
}\r
else\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("code skipped: ORTEK auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-#endif\r
+#endif // ANALYZE\r
key_repetition_len = 0;\r
}\r
else\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("code skipped: KASEIKYO auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-#endif\r
+#endif // ANALYZE\r
key_repetition_len = 0;\r
}\r
else\r
#endif\r
\r
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
- // if SAMSUNG32 protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame\r
- if (irmp_param.protocol == IRMP_SAMSUNG32_PROTOCOL && (repetition_frame_number & 0x01))\r
+ // if SAMSUNG32 or SAMSUNG48 protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame\r
+ if ((irmp_param.protocol == IRMP_SAMSUNG32_PROTOCOL || irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL) && (repetition_frame_number & 0x01))\r
{\r
#ifdef ANALYZE\r
- ANALYZE_PRINTF ("code skipped: SAMSUNG32 auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
+ ANALYZE_PRINTF ("code skipped: SAMSUNG32/SAMSUNG48 auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-#endif\r
+#endif // ANALYZE\r
key_repetition_len = 0;\r
}\r
else\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("code skipped: NUBERT auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-#endif\r
+#endif // ANALYZE\r
key_repetition_len = 0;\r
}\r
else\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("code skipped: SPEAKER auto repetition frame #%d, counter = %d, auto repetition len = %d\n",\r
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);\r
-#endif\r
+#endif // ANALYZE\r
key_repetition_len = 0;\r
}\r
else\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms code detected, length = %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit);\r
-#endif\r
+#endif // ANALYZE\r
irmp_ir_detected = TRUE;\r
\r
#if IRMP_SUPPORT_DENON_PROTOCOL == 1\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms info Denon: waiting for inverted command repetition\n", (double) (time_counter * 1000) / F_INTERRUPTS);\r
-#endif\r
+#endif // ANALYZE\r
last_irmp_denon_command = irmp_tmp_command;\r
denon_repetition_len = 0;\r
irmp_ir_detected = FALSE;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("%8.3fms warning Denon: got unexpected inverted command, ignoring it\n", (double) (time_counter * 1000) / F_INTERRUPTS);\r
-#endif\r
+#endif // ANALYZE\r
last_irmp_denon_command = 0;\r
irmp_ir_detected = FALSE;\r
}\r
{ // Grundig start frame?\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Detected GRUNDIG start frame, ignoring it\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_ir_detected = FALSE;\r
}\r
else\r
{ // Nokia start frame?\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Detected NOKIA start frame, ignoring it\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_ir_detected = FALSE;\r
}\r
else\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Detected NEC repetition frame, key_repetition_len = %d\n", key_repetition_len);\r
ANALYZE_ONLY_NORMAL_PRINTF("REPETETION FRAME ");\r
-#endif\r
+#endif // ANALYZE\r
irmp_tmp_address = last_irmp_address; // address is last address\r
irmp_tmp_command = last_irmp_command; // command is last command\r
irmp_flags |= IRMP_FLAG_REPETITION;\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("Detected NEC repetition frame, ignoring it: timeout occured, key_repetition_len = %d > %d\n",\r
-#endif\r
key_repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
irmp_ir_detected = FALSE;\r
}\r
}\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 4: wrong XOR check for customer id: 0x%1x 0x%1x\n", xor_value, xor_check[2] & 0x0F);\r
-#endif\r
+#endif // ANALYZE\r
irmp_ir_detected = FALSE;\r
}\r
\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 5: wrong XOR check for data bits: 0x%02x 0x%02x\n", xor_value, xor_check[5]);\r
-#endif\r
+#endif // ANALYZE\r
irmp_ir_detected = FALSE;\r
}\r
\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("error 6: parity check failed\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_ir_detected = FALSE;\r
}\r
\r
{\r
#ifdef ANALYZE\r
ANALYZE_PRINTF ("code skipped: ORTEK end of transmission frame (key release)\n");\r
-#endif\r
+#endif // ANALYZE\r
irmp_ir_detected = FALSE;\r
}\r
irmp_tmp_address >>= 2;\r
{\r
#ifdef ANALYZE\r
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');\r
-#endif\r
+#endif // ANALYZE\r
}\r
\r
-// irmp_busy_flag = FALSE;\r
irmp_start_bit_detected = 0; // and wait for next start bit\r
irmp_tmp_command = 0;\r
irmp_pulse_time = 0;\r
{\r
uint8_t key;\r
\r
-#ifdef ANALYZE\r
ANALYZE_ONLY_NORMAL_PUTCHAR (' ');\r
-#endif\r
\r
if (verbose)\r
{\r