*\r
* Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: main.c,v 1.17 2013/01/17 07:33:14 fm Exp $\r
+ * $Id: main.c,v 1.18 2014/07/01 07:50:33 fm Exp $\r
*\r
* This demo module is runnable on AVRs and LM4F120 Launchpad (ARM Cortex M4)\r
*\r
}\r
}\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * PIC18F4520 with XC8 compiler:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined (__XC8)\r
+\r
+#define _XTAL_FREQ 32000000UL // 32MHz clock\r
+#define FOSC _XTAL_FREQ\r
+#define FCY FOSC / 4UL // --> 8MHz\r
+\r
+#define BAUDRATE 19200UL\r
+#define BRG (( FCY 16 BAUDRATE ) -1UL)\r
+\r
+#include <stdio.h>\r
+#include <stdlib.h>\r
+\r
+int\r
+main (void)\r
+{\r
+ IRMP_DATA irmp_data;\r
+\r
+ irmp_init(); // initialize irmp\r
+\r
+ // infinite loop, interrupts will blink PORTD pins and handle UART communications.\r
+ while (1)\r
+ {\r
+ LATBbits.LATB0 = ~LATBbits.LATB0;\r
+\r
+ if (irmp_get_data (&irmp_data))\r
+ {\r
+ // ir signal decoded, do something here...\r
+ // irmp_data.protocol is the protocol, see irmp.h\r
+ // irmp_data.address is the address/manufacturer code of ir sender\r
+ // irmp_data.command is the command code\r
+ // irmp_protocol_names[irmp_data.protocol] is the protocol name (if enabled, see irmpconfig.h)\r
+ printf("proto %d addr %d cmd %d\n", irmp_data.protocol, irmp_data.address, irmp_data.command );\r
+ }\r
+ }\r
+}\r
+\r
+void interrupt high_priority high_isr(void)\r
+{\r
+ if (TMR2IF)\r
+ {\r
+ TMR2IF = 0; // clear Timer 0 interrupt flag\r
+ irmp_ISR();\r
+ }\r
+}\r
+\r
#endif\r