*\r
* Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmp.h,v 1.45 2011/01/18 13:02:15 fm Exp $\r
+ * $Id: irmp.h,v 1.59 2011/03/10 12:29:14 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset\r
#define IRMP_FDC_PROTOCOL 18 // FDC keyboard\r
#define IRMP_RCCAR_PROTOCOL 19 // RC Car\r
-#define IRMP_JVC_PROTOCOL 20 // JVC\r
+#define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)\r
#define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX\r
#define IRMP_NIKON_PROTOCOL 22 // Nikon\r
+#define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver\r
+#define IRMP_IR60_PROTOCOL 24 // IR60 (SAB2008)\r
+#define IRMP_KATHREIN_PROTOCOL 25 // Kathrein\r
+#define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)\r
+#define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)\r
+#define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits\r
+#define IRMP_IMON_PROTOCOL 99 // Imon (bitserial) PROTOTYPE!\r
\r
// some flags of struct IRMP_PARAMETER:\r
#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01\r
#define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02\r
+#define IRMP_PARAM_FLAG_IS_SERIAL 0x04\r
\r
#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause\r
#define NEC_LSB 1 // LSB...MSB\r
#define NEC_FLAGS 0 // flags\r
\r
+#define NEC42_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NEC42_ADDRESS_LEN 13 // read 13 address bits\r
+#define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)\r
+#define NEC42_COMMAND_LEN 8 // read 8 command bits\r
+#define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)\r
+\r
+#define NEC16_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NEC16_ADDRESS_LEN 8 // read 8 address bits\r
+#define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)\r
+#define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)\r
+#define NEC16_COMPLETE_DATA_LEN 16 // complete length\r
+\r
#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse\r
#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse\r
#define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause\r
#define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause\r
-#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits\r
#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits\r
#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit\r
#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause\r
#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
+#define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)\r
#define RECS80_ADDRESS_LEN 3 // read 3 address bits\r
-#define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address)\r
+#define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)\r
#define RECS80_COMMAND_LEN 6 // read 6 command bits\r
-#define RECS80_COMPLETE_DATA_LEN 11 // complete length\r
+#define RECS80_COMPLETE_DATA_LEN 10 // complete length\r
#define RECS80_STOP_BIT 1 // has stop bit\r
#define RECS80_LSB 0 // MSB...LSB\r
#define RECS80_FLAGS 0 // flags\r
\r
#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+\r
#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
#define RC5_ADDRESS_LEN 5 // read 5 address bits\r
#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause\r
#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
-#define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits\r
+#define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits\r
#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)\r
#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits\r
#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length\r
#define BANG_OLUFSEN_LSB 0 // MSB...LSB\r
#define BANG_OLUFSEN_FLAGS 0 // flags\r
\r
-#define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
-#define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
-#define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
-#define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit\r
-#define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB\r
-#define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+#define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
+#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
+#define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
+#define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit\r
+#define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB\r
+#define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
\r
#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times\r
#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
#define NOKIA_COMMAND_LEN 8 // read 8 command bits\r
#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits\r
\r
-#define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause\r
-#define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits\r
-#define SIEMENS_ADDRESS_LEN 12 // read 12 address bits\r
-#define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit)\r
-#define SIEMENS_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit.\r
-#define SIEMENS_COMPLETE_DATA_LEN 23 // complete length\r
-#define SIEMENS_STOP_BIT 0 // has no stop bit\r
-#define SIEMENS_LSB 0 // MSB...LSB\r
-#define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+#define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60\r
+#define IR60_ADDRESS_OFFSET 0 // skip 1 bits\r
+#define IR60_ADDRESS_LEN 0 // read 0 address bits\r
+#define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)\r
+#define IR60_COMMAND_LEN 7 // read 6 command bits\r
+#define IR60_COMPLETE_DATA_LEN 7 // complete length\r
+\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause\r
+#define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit\r
+#define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB\r
+#define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+\r
+#define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define RUWIDO_ADDRESS_LEN 9 // read 9 address bits\r
+#define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits\r
+#define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit\r
+#define RUWIDO_COMPLETE_DATA_LEN 17 // complete length\r
+\r
+#define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define SIEMENS_ADDRESS_LEN 11 // read 11 bits\r
+#define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits\r
+#define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit\r
+#define SIEMENS_COMPLETE_DATA_LEN 22 // complete length\r
\r
#define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse\r
#define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause\r
#define NIKON_LSB 0 // LSB...MSB\r
#define NIKON_FLAGS 0 // flags\r
\r
+#define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
+#define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause\r
+#define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
+#define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause\r
+#define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse\r
+#define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause\r
+#define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)\r
+#define KATHREIN_FRAMES 1 // Kathrein sends 1 frame\r
+#define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
+#define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits\r
+#define KATHREIN_ADDRESS_LEN 4 // read 4 address bits\r
+#define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits\r
+#define KATHREIN_COMMAND_LEN 7 // read 7 bits\r
+#define KATHREIN_COMPLETE_DATA_LEN 13 // complete length\r
+#define KATHREIN_STOP_BIT 1 // has stop bit\r
+#define KATHREIN_LSB 0 // MSB\r
+#define KATHREIN_FLAGS 0 // flags\r
+\r
+#define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse\r
+#define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause\r
+#define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse\r
+#define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause\r
+#define NETBOX_FRAMES 1 // Netbox sends 1 frame\r
+#define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
+#define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NETBOX_ADDRESS_LEN 3 // read 3 address bits\r
+#define NETBOX_COMMAND_OFFSET 3 // skip 3 bits\r
+#define NETBOX_COMMAND_LEN 13 // read 13 bits\r
+#define NETBOX_COMPLETE_DATA_LEN 16 // complete length\r
+#define NETBOX_STOP_BIT 0 // has no stop bit\r
+#define NETBOX_LSB 1 // LSB\r
+#define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags\r
+\r
+#define IMON_START_BIT_PULSE_TIME 1333.0e-6 // 1333 usec pulse\r
+#define IMON_START_BIT_PAUSE_TIME 1172.0e-6 // 1333 usec pause\r
+#define IMON_PULSE_TIME 500.0e-6 // 500 usec pulse\r
+#define IMON_PAUSE_TIME 500.0e-6 // 500 usec pause\r
+#define IMON_FRAMES 1 // Imon sends 1 frame\r
+#define IMON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define IMON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
+#define IMON_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define IMON_ADDRESS_LEN 0 // read 0 address bits\r
+#define IMON_COMMAND_OFFSET 26 // skip 26 bits\r
+#define IMON_COMMAND_LEN 16 // read last 16 bits, ignore rest\r
+#define IMON_COMPLETE_DATA_LEN 42 // complete length, last is stop bit\r
+#define IMON_STOP_BIT 1 // has stop bit\r
+#define IMON_LSB 1 // LSB\r
+#define IMON_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags\r
+\r
#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms\r
// KASEIKYO: automatic repetition after 75ms\r
\r