/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* irmpconfig.h\r
*\r
- * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmpconfig.h,v 1.15 2010/06/11 14:47:24 fm Exp $\r
+ * $Id: irmpconfig.h,v 1.65 2011/04/11 12:54:25 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
#define _IRMPCONFIG_H_\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
+ * Change F_INTERRUPTS if you change the number of interrupts per second,\r
+ * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
+ * A value above 15000 costs additional program space, absolute maximum value is 20000.\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#ifndef F_INTERRUPTS\r
-#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000\r
+#define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change settings from 1 to 0 if you want to disable one or more decoders.\r
* This saves program space.\r
+ *\r
* 1 enable decoder\r
* 0 disable decoder\r
+ *\r
+ * The standard decoders are enabled per default.\r
+ * Less common protocols are disabled here, you need to enable them manually.\r
+ *\r
+ * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
+ * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~100 bytes\r
-#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes\r
-#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes\r
-#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes\r
-#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes\r
-#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~50 bytes\r
-#define IRMP_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes\r
-#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes\r
-#define IRMP_SUPPORT_RC6_PROTOCOL 1 // flag: support RC6 uses ~200 bytes\r
-#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~50 bytes\r
-#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~50 bytes\r
-#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang & Olufsen uses ~200 bytes\r
-#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // flag: support Grundig uses ~150 bytes\r
-#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // flag: support Nokia uses ~150 bytes\r
\r
-/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS > 14500!\r
- *---------------------------------------------------------------------------------------------------------------------------------------------------\r
- */\r
-#if F_INTERRUPTS >= 14500\r
-#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // flag: support Siemens Gigaset uses ~150 bytes\r
-#define IRMP_SUPPORT_FDC1_PROTOCOL 1 // flag: support FDC1 keyboard uses ~100 bytes\r
-#else\r
-#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
-#define IRMP_SUPPORT_FDC1_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
-#endif\r
+// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r
+#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r
+#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r
+#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r
\r
-/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS > 19500!\r
- *---------------------------------------------------------------------------------------------------------------------------------------------------\r
- */\r
-#if F_INTERRUPTS >= 19500\r
-#define IRMP_SUPPORT_FDC2_PROTOCOL 1 // flag: support FDC2 keyboard uses ~100 bytes\r
-#else\r
-#define IRMP_SUPPORT_FDC2_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
-#endif\r
+// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
+#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes\r
+#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r
+#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r
+#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r
\r
-\r
-#if IRMP_SUPPORT_FDC2_PROTOCOL == 1 && IRMP_SUPPORT_RC5_PROTOCOL == 1\r
-#error Protocols RC5 and FDC2 may not be enabled both at the same time. Please disable one of them in irmpconfig.h.\r
-#endif\r
+// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
+#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r
+#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
+#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
+#define IRMP_SUPPORT_IMON_PROTOCOL 0 // IMON keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
+#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r
+#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
+#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r
+#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r
+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r
+#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change hardware pin here:\r
#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
#endif\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * DO NOT CHANGE THE FOLLOWING LINES !\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
+#undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
+#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+#warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)\r
+#undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r
+#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)\r
+#undef IRMP_SUPPORT_RECS80_PROTOCOL\r
+#define IRMP_SUPPORT_RECS80_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)\r
+#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
+#warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)\r
+#undef IRMP_SUPPORT_LEGO_PROTOCOL\r
+#define IRMP_SUPPORT_LEGO_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+#warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
+#undef IRMP_SUPPORT_NEC_PROTOCOL\r
+#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+#endif\r
+\r
+#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+#warning NEC16 protocol needs also NEC protocol, NEC protocol enabled\r
+#undef IRMP_SUPPORT_NEC_PROTOCOL\r
+#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+#endif\r
+\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+#warning NEC42 protocol needs also NEC protocol, NEC protocol enabled\r
+#undef IRMP_SUPPORT_NEC_PROTOCOL\r
+#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+#endif\r
+\r
+#if F_INTERRUPTS > 20000\r
+#error F_INTERRUPTS too high (should be not greater than 20000)\r
+#endif\r
+\r
#endif /* _WC_IRMPCONFIG_H_ */\r