*\r
* Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmp.c,v 1.96 2011/02/25 08:35:32 fm Exp $\r
+ * $Id: irmp.c,v 1.99 2011/03/10 12:29:13 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
* RC6\r
* ---\r
*\r
- * RC6 frame: 1 start bit + 1 bit "1" + 3 mode bits + 1 toggle bit + 16 data bits + 2666 µs pause\r
+ * RC6 frame: 1 start bit + 1 bit "1" + 3 mode bits + 1 toggle bit + 16 data bits + 2666 us pause\r
* RC6 data: 8 address bits + 8 command bits\r
*\r
* start bit toggle bit "0": toggle bit "1": data/mode "0": data/mode "1":\r
#define RC6_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
\r
#define RC6_BIT_PULSE_LEN_MIN_2 ((uint8_t)(F_INTERRUPTS * 2 * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
-#define RC6_BIT_PULSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * 2 * RC6_BIT_TIME * MAX_TOLERANCE_30 + 0.5) + 1) // pulses: 600 - 1400\r
+#define RC6_BIT_PULSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * 2 * RC6_BIT_TIME * MAX_TOLERANCE_60 + 0.5) + 1) // pulses: 600 - 1400\r
#define RC6_BIT_PAUSE_LEN_MIN_2 ((uint8_t)(F_INTERRUPTS * 2 * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1) // pauses: 600 - 1200\r
-#define RC6_BIT_PAUSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * 2 * RC6_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define RC6_BIT_PAUSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * 2 * RC6_BIT_TIME * MAX_TOLERANCE_60 + 0.5) + 1)\r
\r
#define RECS80EXT_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MIN_TOLERANCE_00 + 0.5) - 1)\r
#define RECS80EXT_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MAX_TOLERANCE_00 + 0.5) + 1)\r
#define GRUNDIG_NOKIA_IR60_BIT_LEN_MIN ((uint8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
#define GRUNDIG_NOKIA_IR60_BIT_LEN_MAX ((uint8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
#define GRUNDIG_NOKIA_IR60_BIT_LEN_MIN_2 ((uint8_t)(F_INTERRUPTS * 2 * GRUNDIG_NOKIA_IR60_BIT_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
-#define GRUNDIG_NOKIA_IR60_BIT_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * 2 * GRUNDIG_NOKIA_IR60_BIT_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define GRUNDIG_NOKIA_IR60_BIT_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * 2 * GRUNDIG_NOKIA_IR60_BIT_TIME * MAX_TOLERANCE_50 + 0.5) + 1)\r
#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) + 1)\r
#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
\r
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
#define SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MIN_2 ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 * MIN_TOLERANCE_10 + 0.5) - 1)\r
-#define SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 * MAX_TOLERANCE_60 + 0.5) + 1)\r
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MIN_2 ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 * MIN_TOLERANCE_10 + 0.5) - 1)\r
-#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MAX_2 ((uint8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 * MAX_TOLERANCE_60 + 0.5) + 1)\r
\r
#define FDC_START_BIT_PULSE_LEN_MIN ((uint8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1) // 5%: avoid conflict with NETBOX\r
#define FDC_START_BIT_PULSE_LEN_MAX ((uint8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5))\r
\r
#endif\r
\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+\r
+static PROGMEM IRMP_PARAMETER nec42_param =\r
+{\r
+ IRMP_NEC42_PROTOCOL, // protocol: ir protocol\r
+ NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1\r
+ NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1\r
+ NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1\r
+ NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1\r
+ NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0\r
+ NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0\r
+ NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0\r
+ NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0\r
+ NEC42_ADDRESS_OFFSET, // address_offset: address offset\r
+ NEC42_ADDRESS_OFFSET + NEC_ADDRESS_LEN, // address_end: end of address\r
+ NEC42_COMMAND_OFFSET, // command_offset: command offset\r
+ NEC42_COMMAND_OFFSET + NEC_COMMAND_LEN, // command_end: end of command\r
+ NEC42_COMPLETE_DATA_LEN, // complete_len: complete length of frame\r
+ NEC_STOP_BIT, // stop_bit: flag: frame has stop bit\r
+ NEC_LSB, // lsb_first: flag: LSB first\r
+ NEC_FLAGS // flags: some flags\r
+};\r
+\r
+#endif\r
+\r
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
\r
static PROGMEM IRMP_PARAMETER samsung_param =\r
static uint16_t irmp_tmp_address; // ir address\r
static uint16_t irmp_tmp_command; // ir command\r
\r
-#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
static uint16_t irmp_tmp_address2; // ir address\r
static uint16_t irmp_tmp_command2; // ir command\r
#endif\r
static uint8_t xor_check[6]; // check kaseikyo "parity" bits\r
#endif\r
\r
-static uint8_t irmp_bit; // current bit position\r
-\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* store bit\r
* @details store bit in temp address or temp command\r
}\r
}\r
\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+ else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit >= 13 && irmp_bit < 26)\r
+ {\r
+ irmp_tmp_address2 |= (((uint16_t) (value)) << (irmp_bit - 13)); // CV wants cast\r
+ }\r
+#endif\r
+\r
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1\r
else if (irmp_param.protocol == IRMP_SAMSUNG_PROTOCOL && irmp_bit >= SAMSUNG_ID_OFFSET && irmp_bit < SAMSUNG_ID_OFFSET + SAMSUNG_ID_LEN)\r
{\r
irmp_tmp_command = 0;\r
irmp_tmp_address = 0;\r
\r
-#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)\r
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
irmp_tmp_command2 = 0;\r
irmp_tmp_address2 = 0;\r
#endif\r
ANALYZE_PRINTF ("protocol = NEC or JVC repeat frame, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
JVC_START_BIT_PULSE_LEN_MIN, JVC_START_BIT_PULSE_LEN_MAX,\r
JVC_REPEAT_START_BIT_PAUSE_LEN_MIN, JVC_REPEAT_START_BIT_PAUSE_LEN_MAX);\r
- irmp_param_p = (IRMP_PARAMETER *) &nec_param; // tricky: use nec parameters\r
+ irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
}\r
else\r
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&\r
irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)\r
{\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+ ANALYZE_PRINTF ("protocol = NEC42, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+ NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
+ NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);\r
+ irmp_param_p = (IRMP_PARAMETER *) &nec42_param;\r
+#else\r
ANALYZE_PRINTF ("protocol = NEC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,\r
NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);\r
irmp_param_p = (IRMP_PARAMETER *) &nec_param;\r
+#endif\r
+\r
}\r
else if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&\r
irmp_pause_time >= NEC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_REPEAT_START_BIT_PAUSE_LEN_MAX)\r
#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1\r
if (((irmp_pulse_time >= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX) ||\r
(irmp_pulse_time >= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN_2 && irmp_pulse_time <= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX_2)) &&\r
- ((irmp_pause_time >= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX) ||\r
+ ((irmp_pause_time >= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX) || \r
(irmp_pause_time >= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN_2 && irmp_pause_time <= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX_2)))\r
{ // it's RUWIDO or SIEMENS\r
ANALYZE_PRINTF ("protocol = RUWIDO, start bit timings: pulse: %3d - %3d or %3d - %3d, pause: %3d - %3d or %3d - %3d\n",\r
irmp_tmp_command <<= 1;\r
irmp_tmp_command |= first_bit;\r
}\r
- else if (irmp_pause_time > irmp_param.pause_0_len_max && irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN - 2)\r
+ else if (irmp_pause_time >= irmp_param.pause_0_len_max && irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN - 2)\r
{ // special manchester decoder\r
irmp_param.complete_len = GRUNDIG_COMPLETE_DATA_LEN; // correct complete len\r
got_light = TRUE; // this is a lie, but generates a stop bit ;-)\r
#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1\r
if (irmp_param.protocol == IRMP_RUWIDO_PROTOCOL && !irmp_param.stop_bit)\r
{\r
- if (irmp_pause_time > irmp_param.pause_0_len_max && irmp_bit >= RUWIDO_COMPLETE_DATA_LEN - 2)\r
+ if (irmp_pause_time >= irmp_param.pause_0_len_max && irmp_bit >= RUWIDO_COMPLETE_DATA_LEN - 2)\r
{ // special manchester decoder\r
irmp_param.complete_len = RUWIDO_COMPLETE_DATA_LEN; // correct complete len\r
got_light = TRUE; // this is a lie, but generates a stop bit ;-)\r
#endif\r
#if IRMP_SUPPORT_MANCHESTER == 1\r
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) &&\r
- irmp_pause_time > irmp_param.pause_0_len_max && irmp_bit >= irmp_param.complete_len - 2 && !irmp_param.stop_bit)\r
+ irmp_pause_time >= irmp_param.pause_0_len_max && irmp_bit >= irmp_param.complete_len - 2 && !irmp_param.stop_bit)\r
{ // special manchester decoder\r
got_light = TRUE; // this is a lie, but generates a stop bit ;-)\r
irmp_param.stop_bit = TRUE; // set flag\r
irmp_start_bit_detected = 1; // tricky: don't wait for another start bit...\r
}\r
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
+\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1\r
+ else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 32) // it was a NEC stop bit\r
+ {\r
+ ANALYZE_PRINTF ("Switching to NEC protocol\n");\r
+ irmp_param.stop_bit = TRUE; // set flag\r
+ irmp_param.protocol = IRMP_NEC_PROTOCOL; // switch protocol\r
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17\r
+\r
+ // 0123456789ABC0123456789ABC0123456701234567\r
+ // NEC42: AAAAAAAAAAAAAaaaaaaaaaaaaaCCCCCCCCcccccccc\r
+ // NEC: AAAAAAAAaaaaaaaaCCCCCCCCcccccccc\r
+ irmp_tmp_address |= (irmp_tmp_address2 & 0x0007) << 12;\r
+ irmp_tmp_command = (irmp_tmp_address2 >> 3) | (irmp_tmp_command << 10);\r
+ }\r
+#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1\r
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1\r
+ else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 16) // it was a JVC stop bit\r
+ {\r
+ ANALYZE_PRINTF ("Switching to JVC protocol\n");\r
+ irmp_param.stop_bit = TRUE; // set flag\r
+ irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol\r
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17\r
+\r
+ // 0123456789ABC0123456789ABC0123456701234567\r
+ // NEC42: AAAAAAAAAAAAAaaaaaaaaaaaaaCCCCCCCCcccccccc\r
+ // JVC: AAAACCCCCCCCCCCC\r
+ irmp_tmp_command = (irmp_tmp_address >> 4) | (irmp_tmp_address2 << 9); // set command: upper 12 bits are command bits\r
+ irmp_tmp_address = irmp_tmp_address & 0x000F; // lower 4 bits are address bits\r
+ }\r
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1\r
+#endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
else\r
{\r
ANALYZE_PRINTF ("error 2: pause %d after data bit %d too long\n", irmp_pause_time, irmp_bit);\r
#if IRMP_SUPPORT_MANCHESTER == 1\r
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) // Manchester\r
{\r
+#if 0\r
if (irmp_pulse_time > irmp_param.pulse_1_len_max /* && irmp_pulse_time <= irmp_param.pulse_0_len_max */)\r
+#else // better:\r
+ if (irmp_pulse_time > irmp_param.pulse_1_len_max && irmp_pulse_time <= irmp_param.pulse_0_len_max &&\r
+ irmp_pause_time <= irmp_param.pause_0_len_max)\r
+#endif\r
{\r
#if IRMP_SUPPORT_RC6_PROTOCOL == 1\r
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN) // RC6 toggle bit\r
}\r
}\r
}\r
- else if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max)\r
+ else if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max /* &&\r
+ irmp_pause_time <= irmp_param.pause_0_len_max */)\r
{\r
uint8_t manchester_value;\r
\r
else\r
#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL\r
\r
+#if IRMP_SUPPORT_NEC16_PROTOCOL\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+ if (irmp_param.protocol == IRMP_NEC42_PROTOCOL &&\r
+#else // IRMP_SUPPORT_NEC_PROTOCOL instead\r
+ if (irmp_param.protocol == IRMP_NEC_PROTOCOL &&\r
+#endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1\r
+ irmp_bit == 8 && irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)\r
+ {\r
+ ANALYZE_PRINTF ("Switching to NEC16 protocol\n");\r
+ irmp_param.protocol = IRMP_NEC16_PROTOCOL;\r
+ irmp_param.address_offset = NEC16_ADDRESS_OFFSET;\r
+ irmp_param.address_end = NEC16_ADDRESS_OFFSET + NEC16_ADDRESS_LEN;\r
+ irmp_param.command_offset = NEC16_COMMAND_OFFSET;\r
+ irmp_param.command_end = NEC16_COMMAND_OFFSET + NEC16_COMMAND_LEN;\r
+ irmp_param.complete_len = NEC16_COMPLETE_DATA_LEN;\r
+ wait_for_space = 0;\r
+ }\r
+ else\r
+#endif // IRMP_SUPPORT_NEC16_PROTOCOL\r
+\r
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1\r
if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL)\r
{\r
irmp_bit++;\r
ANALYZE_PUTCHAR ('S');\r
ANALYZE_NEWLINE ();\r
- irmp_tmp_id = 0;\r
irmp_tmp_command <<= 1;\r
}\r
else\r
case 0x000C: key = '\\'; break;\r
case 0x001C: key = '~'; break;\r
case 0x002D: key = '|'; break;\r
- case 0x0034: key = 'µ'; break;\r
+ case 0x0034: key = 0xB5; break; // Mu\r
}\r
}\r
else if (state & (STATE_LEFT_CTRL))\r
projects / irmp.git / blobdiff