*\r
* Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmpconfig.h,v 1.8 2010/05/28 11:23:19 fm Exp $\r
+ * $Id: irmpconfig.h,v 1.48 2011/02/08 08:40:27 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
#define _IRMPCONFIG_H_\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
+ * Change F_INTERRUPTS if you change the number of interrupts per second,\r
+ * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r
+ * A value above 15000 costs additional program space, absolut maximum value is 20000.\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define F_INTERRUPTS 10000 // interrupts per second\r
+#ifndef F_INTERRUPTS\r
+#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 20000\r
+#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change settings from 1 to 0 if you want to disable one or more decoders.\r
* This saves program space.\r
+ *\r
* 1 enable decoder\r
* 0 disable decoder\r
+ *\r
+ * The standard decoders are enabled per default.\r
+ * Some less common protocols are disabled here, you need to enable them manually.\r
+ *\r
+ * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
+ * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~100 bytes\r
-#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes\r
-#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes\r
-#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes\r
-#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes\r
-#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~50 bytes\r
-#define IRMP_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes\r
-#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes\r
-#define IRMP_SUPPORT_RC6_PROTOCOL 1 // flag: support RC6 uses ~200 bytes\r
-#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~50 bytes\r
-#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~50 bytes\r
-#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang & Olufsen uses ~200 bytes\r
-#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // flag: support Grundig uses ~150 bytes\r
-#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // flag: support Nokia uses ~150 bytes\r
-#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // flag: support Siemens Gigaset uses ~150 bytes\r
+\r
+// Protocol Enable Remarks F_INTERRUPTS Program Space\r
+#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes\r
+#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~200 bytes\r
+#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
+#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
+#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)\r
+#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
+#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes\r
+#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes\r
+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* Change hardware pin here:\r
* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
+#ifndef IRMP_LOGGING\r
+#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
+#endif\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * DO NOT CHANGE THE FOLLOWING LINES !\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
+#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
+#undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
+#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
+#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)\r
+#undef IRMP_SUPPORT_RECS80_PROTOCOL\r
+#define IRMP_SUPPORT_RECS80_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
+#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)\r
+#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r
+#endif\r
+\r
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+#warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
+#undef IRMP_SUPPORT_NEC_PROTOCOL\r
+#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+#endif\r
\r
#endif /* _WC_IRMPCONFIG_H_ */\r