*\r
* Copyright (c) 2010-2011 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irsnd.c,v 1.38 2011/05/22 21:40:53 fm Exp $\r
+ * Supported mikrocontrollers:\r
+ *\r
+ * ATtiny45, ATtiny85\r
+ * ATtiny84\r
+ * ATmega8, ATmega16, ATmega32\r
+ * ATmega162\r
+ * ATmega164, ATmega324, ATmega644, ATmega644P, ATmega1284\r
+ * ATmega88, ATmega88P, ATmega168, ATmega168P, ATmega328P\r
+ *\r
+ * $Id: irsnd.c,v 1.41 2011/09/20 10:45:28 fm Exp $\r
*\r
* This program is free software; you can redistribute it and/or modify\r
* it under the terms of the GNU General Public License as published by\r
#include "irsnd.h"\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * ATmega pin definition of OC2 / OC2A / OC2B\r
+ * ATtiny pin definition of OC0A / OC0B\r
+ * ATmega pin definition of OC2 / OC2A / OC2B / OC0 / OC0A / OC0B\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#if defined (__AVR_ATmega8__) // ATmega8 uses OC2 = PB3\r
-#undef IRSND_OC2 // has no OC2A / OC2B\r
-#define IRSND_OC2 0 // magic: use OC2\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * ATtiny pin definition of OC0A / OC0B\r
+ * ATmega pin definition of OC2 / OC2A / OC2B / OC0 / OC0A / OC0B\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#if defined (__AVR_ATtiny84__) // ATtiny84 uses OC0A = PB2 or OC0B = PA7\r
+#if IRSND_OCx == IRSND_OC0A // OC0A\r
#define IRSND_PORT PORTB // port B\r
#define IRSND_DDR DDRB // ddr B\r
-#define IRSND_BIT 3 // OC2A\r
+#define IRSND_BIT 2 // OC0A\r
+#elif IRSND_OCx == IRSND_OC0B // OC0B\r
+#define IRSND_PORT PORTA // port A\r
+#define IRSND_DDR DDRA // ddr A\r
+#define IRSND_BIT 7 // OC0B\r
+#else\r
+#error Wrong value for IRSND_OCx, choose IRSND_OC0A or IRSND_OC0B in irsndconfig.h\r
+#endif // IRSND_OCx\r
+\r
+#elif defined (__AVR_ATtiny45__) || defined (__AVR_ATtiny85__) // ATtiny45/85 uses OC0A = PB0 or OC0B = PB1\r
+#if IRSND_OCx == IRSND_OC0A // OC0A\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 0 // OC0A\r
+#elif IRSND_OCx == IRSND_OC0B // OC0B\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 1 // OC0B\r
+#else\r
+#error Wrong value for IRSND_OCx, choose IRSND_OC0A or IRSND_OC0B in irsndconfig.h\r
+#endif // IRSND_OCx\r
+\r
+#elif defined (__AVR_ATmega8__) // ATmega8 uses only OC2 = PB3\r
+#if IRSND_OCx == IRSND_OC2 // OC0A\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 3 // OC0A\r
+#else\r
+#error Wrong value for IRSND_OCx, choose IRSND_OC2 in irsndconfig.h\r
+#endif // IRSND_OCx\r
+\r
\r
#elif defined (__AVR_ATmega16__) \\r
|| defined (__AVR_ATmega32__) // ATmega16|32 uses OC2 = PD7\r
-#undef IRSND_OC2 // has no OC2A / OC2B\r
-#define IRSND_OC2 0 // magic: use OC2\r
+#if IRSND_OCx == IRSND_OC2 // OC2\r
#define IRSND_PORT PORTD // port D\r
#define IRSND_DDR DDRD // ddr D\r
#define IRSND_BIT 7 // OC2\r
+#else\r
+#error Wrong value for IRSND_OCx, choose IRSND_OC2 in irsndconfig.h\r
+#endif // IRSND_OCx\r
\r
-#elif defined (__AVR_ATmega162__) // ATmega162 uses OC2 = PB1\r
-#undef IRSND_OC2 // has no OC2A / OC2B\r
-#define IRSND_OC2 0 // magic: use OC2\r
+#elif defined (__AVR_ATmega162__) // ATmega162 uses OC2 = PB1 or OC0 = PB0\r
+#if IRSND_OCx == IRSND_OC2 // OC2\r
#define IRSND_PORT PORTB // port B\r
#define IRSND_DDR DDRB // ddr B\r
#define IRSND_BIT 1 // OC2\r
+#elif IRSND_OCx == IRSND_OC0 // OC0\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 0 // OC0\r
+#else\r
+#error Wrong value for IRSND_OCx, choose IRSND_OC2 or IRSND_OC0 in irsndconfig.h\r
+#endif // IRSND_OCx\r
\r
#elif defined (__AVR_ATmega164__) \\r
|| defined (__AVR_ATmega324__) \\r
|| defined (__AVR_ATmega644__) \\r
|| defined (__AVR_ATmega644P__) \\r
- || defined (__AVR_ATmega1284__) // ATmega164|324|644|644P|1284 uses OC2A = PD7 or OC2B = PD6\r
-#if IRSND_OC2 == 1 // OC2A\r
+ || defined (__AVR_ATmega1284__) // ATmega164|324|644|644P|1284 uses OC2A = PD7 or OC2B = PD6 or OC0A = PB3 or OC0B = PB4\r
+#if IRSND_OCx == IRSND_OC2A // OC2A\r
#define IRSND_PORT PORTD // port D\r
#define IRSND_DDR DDRD // ddr D\r
#define IRSND_BIT 7 // OC2A\r
-#elif IRSND_OC2 == 2 // OC2B\r
+#elif IRSND_OCx == IRSND_OC2B // OC2B\r
#define IRSND_PORT PORTD // port D\r
#define IRSND_DDR DDRD // ddr D\r
#define IRSND_BIT 6 // OC2B\r
+#elif IRSND_OCx == IRSND_OC0A // OC0A\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 3 // OC0A\r
+#elif IRSND_OCx == IRSND_OC0B // OC0B\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 4 // OC0B\r
#else\r
-#error Wrong value for IRSND_OC2, choose 1 or 2 in irsndconfig.h\r
-#endif // IRSND_OC2\r
+#error Wrong value for IRSND_OCx, choose IRSND_OC2A, IRSND_OC2B, IRSND_OC0A, or IRSND_OC0B in irsndconfig.h\r
+#endif // IRSND_OCx\r
\r
#elif defined (__AVR_ATmega48__) \\r
|| defined (__AVR_ATmega88__) \\r
+ || defined (__AVR_ATmega88P__) \\r
|| defined (__AVR_ATmega168__) \\r
- || defined (__AVR_ATmega168__) \\r
- || defined (__AVR_ATmega328__) \\r
- || defined (__AVR_ATmega328P__) // ATmega48|88|168|328P uses OC2A = PB3 or OC2B = PD3\r
-#if IRSND_OC2 == 1 // OC2A\r
+ || defined (__AVR_ATmega168P__) \\r
+ || defined (__AVR_ATmega328P__) // ATmega48|88|168|168|328 uses OC2A = PB3 or OC2B = PD3 or OC0A = PD6 or OC0B = PD5\r
+#if IRSND_OCx == IRSND_OC2A // OC2A\r
#define IRSND_PORT PORTB // port B\r
#define IRSND_DDR DDRB // ddr B\r
#define IRSND_BIT 3 // OC2A\r
-#elif IRSND_OC2 == 2 // OC2B\r
+#elif IRSND_OCx == IRSND_OC2B // OC2B\r
#define IRSND_PORT PORTD // port D\r
#define IRSND_DDR DDRD // ddr D\r
#define IRSND_BIT 3 // OC2B\r
+#elif IRSND_OCx == IRSND_OC0A // OC0A\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 6 // OC0A\r
+#elif IRSND_OCx == IRSND_OC0B // OC0B\r
+#define IRSND_PORT PORTD // port D\r
+#define IRSND_DDR DDRD // ddr D\r
+#define IRSND_BIT 5 // OC0B\r
#else\r
-#error Wrong value for IRSND_OC2, choose 1 or 2 in irsndconfig.h\r
-#endif // IRSND_OC2\r
+#error Wrong value for IRSND_OCx, choose IRSND_OC2A, IRSND_OC2B, IRSND_OC0A, or IRSND_OC0B in irsndconfig.h\r
+#endif // IRSND_OCx\r
\r
#else\r
#if !defined (unix) && !defined (WIN32)\r
-#error OC2A/OC2B not defined, please fill in definitions here.\r
+#error mikrocontroller not defined, please fill in definitions here.\r
#endif // unix, WIN32\r
#endif // __AVR...\r
\r
if (! irsnd_is_on)\r
{\r
#ifndef DEBUG\r
-#if IRSND_OC2 == 0 // use OC2\r
- TCCR2 |= (1<<COM20)|(1<<WGM21); // toggle OC2 on compare match, clear Timer 2 at compare match OCR2\r
-#elif IRSND_OC2 == 1 // use OC2A\r
+#if IRSND_OCx == IRSND_OC2 // use OC2\r
+ TCCR2 |= (1<<COM20)|(1<<WGM21); // toggle OC2 on compare match, clear Timer 2 at compare match OCR2\r
+#elif IRSND_OCx == IRSND_OC2A // use OC2A\r
TCCR2A |= (1<<COM2A0)|(1<<WGM21); // toggle OC2A on compare match, clear Timer 2 at compare match OCR2A\r
-#else // use OC2B\r
+#elif IRSND_OCx == IRSND_OC2B // use OC2B\r
TCCR2A |= (1<<COM2B0)|(1<<WGM21); // toggle OC2B on compare match, clear Timer 2 at compare match OCR2A (yes: A, not B!)\r
-#endif // IRSND_OC2\r
+#elif IRSND_OCx == IRSND_OC0 // use OC0\r
+ TCCR0 |= (1<<COM00)|(1<<WGM01); // toggle OC0 on compare match, clear Timer 0 at compare match OCR0\r
+#elif IRSND_OCx == IRSND_OC0A // use OC0A\r
+ TCCR0A |= (1<<COM0A0)|(1<<WGM01); // toggle OC0A on compare match, clear Timer 0 at compare match OCR0A\r
+#elif IRSND_OCx == IRSND_OC0B // use OC0B\r
+ TCCR0A |= (1<<COM0B0)|(1<<WGM01); // toggle OC0B on compare match, clear Timer 0 at compare match OCR0A (yes: A, not B!)\r
+#else\r
+#error wrong value of IRSND_OCx\r
+#endif // IRSND_OCx\r
#endif // DEBUG\r
\r
#if IRSND_USE_CALLBACK == 1\r
if (irsnd_is_on)\r
{\r
#ifndef DEBUG\r
-#if IRSND_OC2 == 0 // use OC2\r
+#if IRSND_OCx == IRSND_OC2 // use OC2\r
TCCR2 &= ~(1<<COM20); // normal port operation, OC2 disconnected.\r
-#elif IRSND_OC2 == 1 // use OC2A\r
+#elif IRSND_OCx == IRSND_OC2A // use OC2A\r
TCCR2A &= ~(1<<COM2A0); // normal port operation, OC2A disconnected.\r
-#else // use OC2B\r
+#elif IRSND_OCx == IRSND_OC2B // use OC2B\r
TCCR2A &= ~(1<<COM2B0); // normal port operation, OC2B disconnected.\r
-#endif // IRSND_OC2\r
+#elif IRSND_OCx == IRSND_OC0 // use OC0\r
+ TCCR0 &= ~(1<<COM00); // normal port operation, OC0 disconnected.\r
+#elif IRSND_OCx == IRSND_OC0A // use OC0A\r
+ TCCR0A &= ~(1<<COM0A0); // normal port operation, OC0A disconnected.\r
+#elif IRSND_OCx == IRSND_OC0B // use OC0B\r
+ TCCR0A &= ~(1<<COM0B0); // normal port operation, OC0B disconnected.\r
+#else\r
+#error wrong value of IRSND_OCx\r
+#endif // IRSND_OCx\r
IRSND_PORT &= ~(1<<IRSND_BIT); // set IRSND_BIT to low\r
#endif // DEBUG\r
\r
irsnd_set_freq (uint8_t freq)\r
{\r
#ifndef DEBUG\r
-#if IRSND_OC2 == 0\r
+#if IRSND_OCx == IRSND_OC2\r
OCR2 = freq; // use register OCR2 for OC2\r
-#else\r
+#elif IRSND_OCx == IRSND_OC2A // use OC2A\r
+ OCR2A = freq; // use register OCR2A for OC2A and OC2B!\r
+#elif IRSND_OCx == IRSND_OC2B // use OC2B\r
OCR2A = freq; // use register OCR2A for OC2A and OC2B!\r
+#elif IRSND_OCx == IRSND_OC0 // use OC0\r
+ OCR0 = freq; // use register OCR2 for OC2\r
+#elif IRSND_OCx == IRSND_OC0A // use OC0A\r
+ OCR0A = freq; // use register OCR0A for OC0A and OC0B!\r
+#elif IRSND_OCx == IRSND_OC0B // use OC0B\r
+ OCR0A = freq; // use register OCR0A for OC0A and OC0B!\r
+#else\r
+#error wrong value of IRSND_OCx\r
#endif\r
#endif // DEBUG\r
}\r
IRSND_PORT &= ~(1<<IRSND_BIT); // set IRSND_BIT to low\r
IRSND_DDR |= (1<<IRSND_BIT); // set IRSND_BIT to output\r
\r
-#if defined (__AVR_ATmega32__)\r
+#if IRSND_OCx == IRSND_OC2 // use OC2\r
TCCR2 = (1<<WGM21); // CTC mode\r
TCCR2 |= (1<<CS20); // 0x01, start Timer 2, no prescaling\r
-#else\r
+#elif IRSND_OCx == IRSND_OC2A || IRSND_OCx == IRSND_OC2B // use OC2A or OC2B\r
TCCR2A = (1<<WGM21); // CTC mode\r
TCCR2B |= (1<<CS20); // 0x01, start Timer 2, no prescaling\r
-#endif // __AVR... \r
+#elif IRSND_OCx == IRSND_OC0 // use OC0\r
+ TCCR0 = (1<<WGM01); // CTC mode\r
+ TCCR0 |= (1<<CS00); // 0x01, start Timer 0, no prescaling\r
+#elif IRSND_OCx == IRSND_OC0A || IRSND_OCx == IRSND_OC0B // use OC0A or OC0B\r
+ TCCR0A = (1<<WGM01); // CTC mode\r
+ TCCR0B |= (1<<CS00); // 0x01, start Timer 0, no prescaling\r
+#else\r
+#error wrong value of IRSND_OCx\r
+#endif\r
\r
irsnd_set_freq (IRSND_FREQ_36_KHZ); // default frequency\r
#endif // DEBUG\r
\r
irsnd_protocol = IRMP_NEC_PROTOCOL; // APPLE protocol is NEC with id instead of inverted command\r
\r
- irsnd_buffer[0] = (address & 0xFF00) >> 8; // AAAAAAAA\r
- irsnd_buffer[1] = (address & 0x00FF); // AAAAAAAA\r
- irsnd_buffer[2] = (command & 0xFF00) >> 8; // CCCCCCCC\r
- irsnd_buffer[3] = (command & 0x00FF); // CCCCCCCC\r
-\r
+ irsnd_buffer[0] = (address & 0xFF00) >> 8; // AAAAAAAA\r
+ irsnd_buffer[1] = (address & 0x00FF); // AAAAAAAA\r
+ irsnd_buffer[2] = (command & 0xFF00) >> 8; // CCCCCCCC\r
+ irsnd_buffer[3] = 0x8B; // 10001011 (id)\r
irsnd_busy = TRUE;\r
break;\r
}\r
irsnd_buffer[0] = (address & 0xFF00) >> 8; // AAAAAAAA\r
irsnd_buffer[1] = (address & 0x00FF); // AAAAAAAA\r
irsnd_buffer[2] = (command & 0xFF00) >> 8; // CCCCCCCC\r
+ irsnd_buffer[3] = ~((command & 0xFF00) >> 8); // cccccccc\r
+ irsnd_busy = TRUE;\r
+ break;\r
+ }\r
+#endif\r
+#if IRSND_SUPPORT_NEC16_PROTOCOL == 1\r
+ case IRMP_NEC16_PROTOCOL:\r
+ {\r
+ address = bitsrevervse (irmp_data_p->address, NEC16_ADDRESS_LEN);\r
+ command = bitsrevervse (irmp_data_p->command, NEC16_COMMAND_LEN);\r
\r
- irsnd_protocol = IRMP_NEC_PROTOCOL; // APPLE protocol is NEC with fix bitmask instead of inverted command\r
- irsnd_buffer[3] = 0x8B; // 10001011\r
- {\r
- irsnd_buffer[3] = ~((command & 0xFF00) >> 8); // cccccccc\r
- }\r
-\r
+ irsnd_buffer[0] = (address & 0x00FF); // AAAAAAAA\r
+ irsnd_buffer[1] = (command & 0x00FF); // CCCCCCCC\r
+ irsnd_busy = TRUE;\r
+ break;\r
+ }\r
+#endif\r
+#if IRSND_SUPPORT_NEC42_PROTOCOL == 1\r
+ case IRMP_NEC42_PROTOCOL:\r
+ {\r
+ address = bitsrevervse (irmp_data_p->address, NEC42_ADDRESS_LEN);\r
+ command = bitsrevervse (irmp_data_p->command, NEC42_COMMAND_LEN);\r
+\r
+ irsnd_buffer[0] = ( (address & 0x1FE0) >> 5); // AAAAAAAA\r
+ irsnd_buffer[1] = ( (address & 0x001F) << 3) | ((~address & 0x1C00) >> 10); // AAAAAaaa\r
+ irsnd_buffer[2] = ((~address & 0x03FC) >> 2); // aaaaaaaa\r
+ irsnd_buffer[3] = ((~address & 0x0003) << 6) | ( (command & 0x00FC) >> 2); // aaCCCCCC\r
+ irsnd_buffer[4] = ( (command & 0x0003) << 6) | ((~command & 0x00FC) >> 2); // CCcccccc\r
+ irsnd_buffer[5] = ((~command & 0x0003) << 6); // cc\r
irsnd_busy = TRUE;\r
break;\r
}\r
break;\r
}\r
#endif\r
+#if IRSND_SUPPORT_NEC16_PROTOCOL == 1\r
+ case IRMP_NEC16_PROTOCOL:\r
+ {\r
+ startbit_pulse_len = NEC_START_BIT_PULSE_LEN;\r
+ startbit_pause_len = NEC_START_BIT_PAUSE_LEN - 1;\r
+ pulse_1_len = NEC_PULSE_LEN;\r
+ pause_1_len = NEC_1_PAUSE_LEN - 1;\r
+ pulse_0_len = NEC_PULSE_LEN;\r
+ pause_0_len = NEC_0_PAUSE_LEN - 1;\r
+ has_stop_bit = NEC_STOP_BIT;\r
+ complete_data_len = NEC16_COMPLETE_DATA_LEN + 1; // 1 more: sync bit\r
+ n_auto_repetitions = 1; // 1 frame\r
+ auto_repetition_pause_len = 0;\r
+ repeat_frame_pause_len = NEC_FRAME_REPEAT_PAUSE_LEN;\r
+ irsnd_set_freq (IRSND_FREQ_38_KHZ);\r
+ break;\r
+ }\r
+#endif\r
+#if IRSND_SUPPORT_NEC42_PROTOCOL == 1\r
+ case IRMP_NEC42_PROTOCOL:\r
+ {\r
+ startbit_pulse_len = NEC_START_BIT_PULSE_LEN;\r
+ startbit_pause_len = NEC_START_BIT_PAUSE_LEN - 1;\r
+ pulse_1_len = NEC_PULSE_LEN;\r
+ pause_1_len = NEC_1_PAUSE_LEN - 1;\r
+ pulse_0_len = NEC_PULSE_LEN;\r
+ pause_0_len = NEC_0_PAUSE_LEN - 1;\r
+ has_stop_bit = NEC_STOP_BIT;\r
+ complete_data_len = NEC42_COMPLETE_DATA_LEN;\r
+ n_auto_repetitions = 1; // 1 frame\r
+ auto_repetition_pause_len = 0;\r
+ repeat_frame_pause_len = NEC_FRAME_REPEAT_PAUSE_LEN;\r
+ irsnd_set_freq (IRSND_FREQ_38_KHZ);\r
+ break;\r
+ }\r
+#endif\r
#if IRSND_SUPPORT_SAMSUNG_PROTOCOL == 1\r
case IRMP_SAMSUNG_PROTOCOL:\r
{\r
#if IRSND_SUPPORT_NEC_PROTOCOL == 1\r
case IRMP_NEC_PROTOCOL:\r
#endif\r
+#if IRSND_SUPPORT_NEC16_PROTOCOL == 1\r
+ case IRMP_NEC16_PROTOCOL:\r
+#endif\r
+#if IRSND_SUPPORT_NEC42_PROTOCOL == 1\r
+ case IRMP_NEC42_PROTOCOL:\r
+#endif\r
#if IRSND_SUPPORT_SAMSUNG_PROTOCOL == 1\r
case IRMP_SAMSUNG_PROTOCOL:\r
case IRMP_SAMSUNG32_PROTOCOL:\r
#endif\r
\r
\r
-#if IRSND_SUPPORT_SIRCS_PROTOCOL == 1 || IRSND_SUPPORT_NEC_PROTOCOL == 1 || IRSND_SUPPORT_SAMSUNG_PROTOCOL == 1 || IRSND_SUPPORT_MATSUSHITA_PROTOCOL == 1 || \\r
+#if IRSND_SUPPORT_SIRCS_PROTOCOL == 1 || IRSND_SUPPORT_NEC_PROTOCOL == 1 || IRSND_SUPPORT_NEC16_PROTOCOL == 1 || IRSND_SUPPORT_NEC42_PROTOCOL == 1 || \\r
+ IRSND_SUPPORT_SAMSUNG_PROTOCOL == 1 || IRSND_SUPPORT_MATSUSHITA_PROTOCOL == 1 || \\r
IRSND_SUPPORT_KASEIKYO_PROTOCOL == 1 || IRSND_SUPPORT_RECS80_PROTOCOL == 1 || IRSND_SUPPORT_RECS80EXT_PROTOCOL == 1 || IRSND_SUPPORT_DENON_PROTOCOL == 1 || \\r
IRSND_SUPPORT_NUBERT_PROTOCOL == 1 || IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1 || IRSND_SUPPORT_FDC_PROTOCOL == 1 || IRSND_SUPPORT_RCCAR_PROTOCOL == 1 || \\r
IRSND_SUPPORT_JVC_PROTOCOL == 1 || IRSND_SUPPORT_NIKON_PROTOCOL == 1 || IRSND_SUPPORT_LEGO_PROTOCOL == 1 || IRSND_SUPPORT_THOMSON_PROTOCOL == 1 \r
else\r
#endif\r
\r
+#if IRSND_SUPPORT_NEC16_PROTOCOL == 1\r
+ if (irsnd_protocol == IRMP_NEC16_PROTOCOL)\r
+ {\r
+ if (current_bit < NEC16_ADDRESS_LEN) // send address bits\r
+ {\r
+ pulse_len = NEC_PULSE_LEN;\r
+ pause_len = (irsnd_buffer[current_bit / 8] & (1<<(7-(current_bit % 8)))) ?\r
+ (NEC_1_PAUSE_LEN - 1) : (NEC_0_PAUSE_LEN - 1);\r
+ }\r
+ else if (current_bit == NEC16_ADDRESS_LEN) // send SYNC bit (8th bit)\r
+ {\r
+ pulse_len = NEC_PULSE_LEN;\r
+ pause_len = NEC_START_BIT_PAUSE_LEN - 1;\r
+ }\r
+ else if (current_bit < NEC16_COMPLETE_DATA_LEN + 1) // send n'th bit\r
+ {\r
+ uint8_t cur_bit = current_bit - 1; // sync skipped, offset = -1 !\r
+\r
+ pulse_len = NEC_PULSE_LEN;\r
+ pause_len = (irsnd_buffer[cur_bit / 8] & (1<<(7-(cur_bit % 8)))) ?\r
+ (NEC_1_PAUSE_LEN - 1) : (NEC_0_PAUSE_LEN - 1);\r
+ }\r
+ }\r
+ else\r
+#endif\r
+\r
#if IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1\r
if (irsnd_protocol == IRMP_BANG_OLUFSEN_PROTOCOL)\r
{\r
projects / irmp.git / blobdiff