Version 2.9.2: added S100 protocol, some minor corrections

[irmp.git] / irsndconfig.h

diff --git a/irsndconfig.h b/irsndconfig.h
index 9399b9bef3fc710da8ef03b9b2991e418af09296..e661f3749eac9452f9ce2285cb22d1d4aba5aaff 100644 (file)
--- a/irsndconfig.h
+++ b/irsndconfig.h
@@ -5,7 +5,7 @@
  *\r
  * Copyright (c) 2010-2015 Frank Meyer - frank(at)fli4l.de\r
  *\r
- * $Id: irsndconfig.h,v 1.65 2015/02/26 15:42:53 fm Exp $\r
+ * $Id: irsndconfig.h,v 1.73 2015/05/29 08:24:37 fm Exp $\r
  *\r
  * This program is free software; you can redistribute it and/or modify\r
  * it under the terms of the GNU General Public License as published by\r
@@ -62,6 +62,7 @@
 // exotic protocols, enable here!               Enable  Remarks                 F_INTERRUPTS            Program Space\r
 #define IRSND_SUPPORT_KATHREIN_PROTOCOL         0       // Kathrein             >= 10000                 DON'T CHANGE, NOT SUPPORTED YET!\r
 #define IRSND_SUPPORT_NUBERT_PROTOCOL           0       // NUBERT               >= 10000                 ~100 bytes\r
+#define IRSND_SUPPORT_FAN_PROTOCOL              1       // FAN (ventilator)     >= 10000                 ~100 bytes\r
 #define IRSND_SUPPORT_SPEAKER_PROTOCOL          0       // SPEAKER              >= 10000                 ~100 bytes\r
 #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL     0       // Bang&Olufsen         >= 10000                 ~250 bytes\r
 #define IRSND_SUPPORT_RECS80_PROTOCOL           0       // RECS80               >= 15000                 ~100 bytes\r
@@ -80,6 +81,8 @@
 #define IRSND_SUPPORT_RCMM_PROTOCOL             0       // RCMM 12,24, or 32    >= 20000                 DON'T CHANGE, NOT SUPPORTED YET!\r
 #define IRSND_SUPPORT_LGAIR_PROTOCOL            0       // LG Air Condition     >= 10000                 ~150 bytes.\r
 #define IRSND_SUPPORT_SAMSUNG48_PROTOCOL        0       // Samsung48            >= 10000                 ~100 bytes\r
+#define IRSND_SUPPORT_PENTAX_PROTOCOL           0       // Pentax               >= 10000                 ~150 bytes\r
+#define IRSND_SUPPORT_S100_PROTOCOL             0       // S100                 >= 10000                 ~150 bytes\r
 \r
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
@@ -89,12 +92,12 @@
  *                                              IRSND_XMEGA_OC0B = OC0B on ATxmegas  supporting OC0B, e.g. ATxmega128A1U\r
  *                                              IRSND_XMEGA_OC0C = OC0C on ATxmegas  supporting OC0C, e.g. ATxmega128A1U\r
  *                                              IRSND_XMEGA_OC0D = OC0D on ATxmegas  supporting OC0D, e.g. ATxmega128A1U\r
- *                                              IRSND_XMEGA_OC1A = OC0A on ATxmegas  supporting OC1A, e.g. ATxmega128A1U\r
- *                                              IRSND_XMEGA_OC1B = OC0B on ATxmegas  supporting OC1B, e.g. ATxmega128A1U\r
+ *                                              IRSND_XMEGA_OC1A = OC1A on ATxmegas  supporting OC1A, e.g. ATxmega128A1U\r
+ *                                              IRSND_XMEGA_OC1B = OC1B on ATxmegas  supporting OC1B, e.g. ATxmega128A1U\r
  *---------------------------------------------------------------------------------------------------------------------------------------------------\r
  */\r
 #if defined(__AVR_XMEGA__)                                              // XMEGA\r
-#  define XMEGA_Timer_NR                        2                       // 1 == Timer PORTC //2 == Timer PORTD //3 == Timer PORTE //4 == Timer PORTF\r
+#  define IRSND_PORT_PRE                        PORTD                   \r
 #  define XMEGA_Timer                           TCD0\r
 #  define IRSND_OCx                             IRSND_XMEGA_OC0B        // use OC0B\r
 \r