/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* irsndconfig.h\r
*\r
- * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
+ * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H!\r
*\r
- * $Id: irsndconfig.h,v 1.6 2010/06/08 23:34:14 fm Exp $\r
+ * Copyright (c) 2010-2011 Frank Meyer - frank(at)fli4l.de\r
+ *\r
+ * $Id: irsndconfig.h,v 1.37 2012/05/24 06:55:11 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
\r
+#ifndef _IRSNDCONFIG_H_\r
+#define _IRSNDCONFIG_H_\r
+\r
+#if !defined(_IRSND_H_)\r
+# error please include only irsnd.h, not irsndconfig.h\r
+#endif\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
+ * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#ifndef F_INTERRUPTS\r
-#define F_INTERRUPTS 10000 // interrupts per second\r
+# define F_INTERRUPTS 15000 // interrupts per second\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* 0 disable decoder\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~150 bytes\r
-#define IRSND_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~100 bytes\r
-#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~300 bytes\r
-#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~150 bytes\r
-#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 0 // flag: support Kaseikyo NOT SUPPORTED YET!\r
-#define IRSND_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~100 bytes\r
-#define IRSND_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~150 bytes\r
-#define IRSND_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~200 bytes\r
-#define IRSND_SUPPORT_RC6_PROTOCOL 0 // flag: support RC6 NOT SUPPORTED YET!\r
-#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~100 bytes\r
-#define IRSND_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~100 bytes\r
-#define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang&Olufsen uses ~250 bytes\r
-#define IRSND_SUPPORT_GRUNDIG_PROTOCOL 1 // flag: support Grundig uses ~300 bytes\r
-#define IRSND_SUPPORT_NOKIA_PROTOCOL 1 // flag: support Nokia uses ~400 bytes\r
+\r
+// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r
+#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~200 bytes\r
+#define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~100 bytes\r
+#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r
+#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes\r
+#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes\r
+#define IRSND_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~200 bytes\r
+\r
+// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
+#define IRSND_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~150 bytes\r
+#define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~250 bytes\r
+#define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 ~250 bytes\r
+#define IRSND_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r
+#define IRSND_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~150 bytes\r
+#define IRSND_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes\r
+#define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~250 bytes\r
+#define IRSND_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r
+#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 ~150 bytes\r
+#define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~400 bytes\r
+\r
+// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
+#define IRSND_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~100 bytes\r
+#define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 ~250 bytes\r
+#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~100 bytes\r
+#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~100 bytes\r
+#define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r
+#define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes\r
+#define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes\r
+#define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes\r
+#define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 DON'T CHANGE, NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * THE FOLLOWING ENCODERS WORK ONLY FOR F_INTERRUPTS > 14500!\r
+ * AVR section:\r
+ *\r
+ * Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8\r
+ * IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88\r
+ * IRSND_OC2B = OC2B on ATmegas supporting OC2B, e.g. ATmega88\r
+ * IRSND_OC0 = OC0 on ATmegas supporting OC0, e.g. ATmega162\r
+ * IRSND_OC0A = OC0A on ATmegas/ATtinys supporting OC0A, e.g. ATtiny84, ATtiny85\r
+ * IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#if F_INTERRUPTS >= 14500\r
-#define IRSND_SUPPORT_SIEMENS_PROTOCOL 1 // flag: support Siemens, e.g. Gigaset uses ~150 bytes\r
-#define IRSND_SUPPORT_FDC_PROTOCOL 1 // flag: support FDC infrared keyboard uses ~150 bytes\r
-#else\r
-#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
-#define IRSND_SUPPORT_FDC_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low!\r
-#endif\r
+#if defined(ATMEL_AVR)\r
+# define IRSND_OCx IRSND_OC2B // use OC2B\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * PIC C18 section:\r
+ *\r
+ * Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ...\r
+ * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined(PIC_C18)\r
+# define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC\r
+ // change other PIC C18 specific settings:\r
+# define F_CPU 48000000UL // PIC frequency: set your freq here\r
+# define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16\r
+# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value\r
+# warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself !\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * ARM STM32 section:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif defined (ARM_STM32) // use A6 as IR output on STM32\r
+# define IRSND_PORT_LETTER A\r
+# define IRSND_BIT_NUMBER 6\r
+# define IRSND_TIMER_NUMBER 10\r
+# define IRSND_TIMER_CHANNEL 1 // only channel 1 can be used at the moment, others won't work\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Other target system\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#elif !defined (UNIX_OR_WINDOWS)\r
+# error target system not defined.\r
+#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * Change hardware pin here:\r
+ * Use Callbacks to indicate output signal or something else\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#if defined (__AVR_ATmega32__) || defined (__AVR_ATmega644P__)\r
-#define IRSND_PORT PORTD // port D\r
-#define IRSND_DDR DDRD // ddr D\r
-#define IRSND_BIT 7 // OC2A\r
-#else\r
-#define IRSND_PORT PORTB // port B\r
-#define IRSND_DDR DDRB // ddr B\r
-#define IRSND_BIT 3 // OC2A\r
-#endif // __AVR...\r
+#ifndef IRSND_USE_CALLBACK\r
+# define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0\r
+#endif\r
+\r
+#endif // _IRSNDCONFIG_H_\r