*\r
* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H or IRSND.H!\r
*\r
- * Copyright (c) 2013 Frank Meyer - frank(at)fli4l.de\r
+ * Copyright (c) 2013-2015 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmpprotocols.h,v 1.11 2013/03/19 15:11:55 fm Exp $\r
+ * $Id: irmpprotocols.h,v 1.35 2015/05/29 08:23:56 fm Exp $\r
*\r
* This program is free software; you can redistribute it and/or modify\r
* it under the terms of the GNU General Public License as published by\r
#define IRMP_A1TVBOX_PROTOCOL 32 // A1 TV Box\r
#define IRMP_ORTEK_PROTOCOL 33 // ORTEK - Hama\r
#define IRMP_TELEFUNKEN_PROTOCOL 34 // Telefunken (1560)\r
-\r
-#define IRMP_N_PROTOCOLS 34 // number of supported protocols\r
+#define IRMP_ROOMBA_PROTOCOL 35 // iRobot Roomba vacuum cleaner\r
+#define IRMP_RCMM32_PROTOCOL 36 // Fujitsu-Siemens (Activy remote control)\r
+#define IRMP_RCMM24_PROTOCOL 37 // Fujitsu-Siemens (Activy keyboard)\r
+#define IRMP_RCMM12_PROTOCOL 38 // Fujitsu-Siemens (Activy keyboard)\r
+#define IRMP_SPEAKER_PROTOCOL 39 // Another loudspeaker protocol, similar to Nubert\r
+#define IRMP_LGAIR_PROTOCOL 40 // LG air conditioner\r
+#define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits)\r
+#define IRMP_MERLIN_PROTOCOL 42 // Merlin (Pollin 620 185)\r
+#define IRMP_PENTAX_PROTOCOL 43 // Pentax camera\r
+#define IRMP_FAN_PROTOCOL 44 // FAN (ventilator), very similar to NUBERT, but last bit is data bit instead of stop bit\r
+#define IRMP_S100_PROTOCOL 45 // very similar to RC5, but 14 instead of 13 data bits\r
+#define IRMP_RADIO1_PROTOCOL 46 // Radio protocol (experimental status), do not use it yet!\r
+\r
+#define IRMP_N_PROTOCOLS 46 // number of supported protocols\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* timing constants:\r
#define SIRCS_FLAGS 0 // flags\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * NEC & NEC42 & NEC16:\r
+ * NEC & NEC42 & NEC16 & LGAIR:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse\r
#define NEC42_COMMAND_LEN 8 // read 8 command bits\r
#define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)\r
\r
+#define LGAIR_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define LGAIR_ADDRESS_LEN 8 // read 8 address bits\r
+#define LGAIR_COMMAND_OFFSET 8 // skip 8 bits (8 address)\r
+#define LGAIR_COMMAND_LEN 16 // read 16 bits (16 command)\r
+#define LGAIR_COMPLETE_DATA_LEN 28 // complete length (8 address + 16 command + 4 checksum)\r
+\r
#define NEC16_ADDRESS_OFFSET 0 // skip 0 bits\r
#define NEC16_ADDRESS_LEN 8 // read 8 address bits\r
#define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)\r
#define NEC16_COMPLETE_DATA_LEN 16 // complete length\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * SAMSUNG & SAMSUNG32:\r
+ * SAMSUNG & SAMSUNG32 & SAMSUNG48:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse\r
#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause\r
#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse\r
-#define SAMSUNG_1_PAUSE_TIME 1650.0e-6 // 1650 usec pause\r
-#define SAMSUNG_0_PAUSE_TIME 550.0e-6 // 550 usec pause\r
+#define SAMSUNG_1_PAUSE_TIME 1500.0e-6 // 1550 usec pause\r
+#define SAMSUNG_0_PAUSE_TIME 500.0e-6 // 500 usec pause\r
\r
#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits\r
#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits\r
#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits\r
#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length\r
-#define SAMSUNG32_FRAMES 1 // SAMSUNG32 sends each frame 1 times\r
+#define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times // fm: correct?\r
#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms\r
#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms\r
\r
+#define SAMSUNG48_COMMAND_OFFSET 16 // skip 16 bits\r
+#define SAMSUNG48_COMMAND_LEN 32 // read 32 command bits\r
+#define SAMSUNG48_COMPLETE_DATA_LEN 48 // complete length\r
+#define SAMSUNG48_FRAMES 2 // SAMSUNG48 sends each frame 2 times\r
+#define SAMSUNG48_AUTO_REPETITION_PAUSE_TIME 5.0e-3 // repetition after 5 ms\r
+#define SAMSUNG48_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* MATSUSHITA:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
-#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define RC5_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms\r
\r
#define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)\r
#define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits\r
#define RC5_LSB 0 // MSB...LSB\r
#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * S100: very similar to RC5, but 14 insted of 13 bits\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define S100_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
+#define S100_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms\r
+\r
+#define S100_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)\r
+#define S100_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits\r
+#define S100_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
+#define S100_COMMAND_LEN 7 // read 7 command bits\r
+#define S100_COMPLETE_DATA_LEN 14 // complete length\r
+#define S100_STOP_BIT 0 // has no stop bit\r
+#define S100_LSB 0 // MSB...LSB\r
+#define S100_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* DENON:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
#define NUBERT_LSB 0 // MSB?\r
#define NUBERT_FLAGS 0 // flags\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * FAN: (ventilator)\r
+ *\r
+ * Similar to NUBERT, but\r
+ * - has data bit instead of stop bit\r
+ * - has NO frame repetition\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define FAN_START_BIT_PULSE_TIME 1280.0e-6 // 1280 usec pulse\r
+#define FAN_START_BIT_PAUSE_TIME 380.0e-6 // 380 usec pause\r
+#define FAN_1_PULSE_TIME 1280.0e-6 // 1280 usec pulse\r
+#define FAN_1_PAUSE_TIME 380.0e-6 // 380 usec pause\r
+#define FAN_0_PULSE_TIME 380.0e-6 // 380 usec pulse\r
+#define FAN_0_PAUSE_TIME 1280.0e-6 // 1280 usec pause\r
+#define FAN_FRAMES 1 // FAN sends only 1 frame (NUBERT sends 2)\r
+#define FAN_AUTO_REPETITION_PAUSE_TIME 6.6e-3 // auto repetition after 6.6ms\r
+#define FAN_FRAME_REPEAT_PAUSE_TIME 6.6e-3 // frame repeat after 6.6ms\r
+#define FAN_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define FAN_ADDRESS_LEN 0 // read 0 address bits\r
+#define FAN_COMMAND_OFFSET 0 // skip 0 bits\r
+#define FAN_COMMAND_LEN 11 // read 10 bits\r
+#define FAN_COMPLETE_DATA_LEN 11 // complete length\r
+#define FAN_STOP_BIT 0 // has NO stop bit\r
+#define FAN_LSB 0 // MSB\r
+#define FAN_FLAGS 0 // flags\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * SPEAKER:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 440 usec pulse\r
+#define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 1250 usec pause\r
+#define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1250 usec pulse\r
+#define SPEAKER_1_PAUSE_TIME 440.0e-6 // 440 usec pause\r
+#define SPEAKER_0_PULSE_TIME 440.0e-6 // 440 usec pulse\r
+#define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1250 usec pause\r
+#define SPEAKER_FRAMES 2 // SPEAKER sends 2 frames\r
+#define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms\r
+#define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define SPEAKER_ADDRESS_LEN 0 // read 0 address bits\r
+#define SPEAKER_COMMAND_OFFSET 0 // skip 0 bits\r
+#define SPEAKER_COMMAND_LEN 10 // read 10 bits\r
+#define SPEAKER_COMPLETE_DATA_LEN 10 // complete length\r
+#define SPEAKER_STOP_BIT 1 // has stop bit\r
+#define SPEAKER_LSB 0 // MSB?\r
+#define SPEAKER_FLAGS 0 // flags\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* BANG_OLUFSEN:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* SIEMENS & RUWIDO:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
+\r
+#if 0\r
#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse\r
#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause\r
#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse\r
#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse\r
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause\r
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause\r
+#else\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 370.0e-6 // 370 usec pulse\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 370.0e-6 // 370 usec short pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 680.0e-6 // 680 usec long pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause\r
+#endif\r
+\r
#define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
#define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit\r
#define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB\r
#define A1TVBOX_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
- * ORTEK (Hama):\r
+ * MERLIN:\r
+ * See notes for A1TVBOX\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse\r
+#define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 429 usec pause\r
+#define MERLIN_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse\r
+#define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 210 usec pulse\r
+#define MERLIN_STOP_BIT 0 // has no stop bit\r
+#define MERLIN_LSB 0 // MSB...LSB\r
+#define MERLIN_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags\r
+#define MERLIN_FRAMES 1 // MERLIN sends each frame 1 times\r
+#define MERLIN_ADDRESS_OFFSET 1 // skip 1 bits\r
+#define MERLIN_ADDRESS_LEN 8 // read 8 address bits\r
+#define MERLIN_COMMAND_OFFSET 8 // skip 9 bits (start bit + address)\r
+#define MERLIN_COMMAND_LEN 10 // read 8 command bits\r
+#define MERLIN_COMPLETE_DATA_LEN 19 // complete length incl. start bit\r
+#define MERLIN_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * ORTEK (Hama): 6 address bits + 2 frame type bits + 6 command bits + 1 parity bit + 1 unknown bit + "1" + "0"\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#define ORTEK_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse\r
#define ORTEK_START_BIT_PAUSE_TIME 1000.0e-6 // 1000 usec pause\r
#define ORTEK_BIT_TIME 500.0e-6 // 500 usec pulse/pause\r
#define ORTEK_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define ORTEK_ADDRESS_OFFSET 0 // skip "1" + 3 unknown bits + 1 toggle bit\r
-#define ORTEK_ADDRESS_LEN 6 // read 7 address bits\r
-#define ORTEK_COMMAND_OFFSET 8 // skip 5 bits ("1" + 3 mode + 1 toggle bit)\r
-#define ORTEK_COMMAND_LEN 6 // read 5 command bits\r
+#define ORTEK_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define ORTEK_ADDRESS_LEN 8 // read 6 address bits + 2 special bits\r
+#define ORTEK_COMMAND_OFFSET 8 // skip 6 address bits + 2 special bits\r
+#define ORTEK_COMMAND_LEN 6 // read 6 command bits\r
#define ORTEK_COMPLETE_DATA_LEN 18 // complete length\r
#define ORTEK_STOP_BIT 0 // has no stop bit\r
#define ORTEK_LSB 0 // MSB...LSB\r
#define TELEFUNKEN_PULSE_TIME 600.0e-6 // 600 usec pulse\r
#define TELEFUNKEN_1_PAUSE_TIME 1500.0e-6 // 1500 usec pause\r
#define TELEFUNKEN_0_PAUSE_TIME 600.0e-6 // 600 usec pause\r
-#define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms\r
+#define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after XX ms ?????\r
#define TELEFUNKEN_ADDRESS_OFFSET 0 // skip 0 bits\r
#define TELEFUNKEN_ADDRESS_LEN 0 // read 0 address bits\r
#define TELEFUNKEN_COMMAND_OFFSET 0 // skip 0 bits\r
#define TELEFUNKEN_LSB 0 // LSB...MSB\r
#define TELEFUNKEN_FLAGS 0 // flags\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * ROOMBA\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define ROOMBA_START_BIT_PULSE_TIME 2790.0e-6 // 2790 usec pulse\r
+#define ROOMBA_START_BIT_PAUSE_TIME 930.0e-6 // 930 usec pause\r
+#define ROOMBA_0_PULSE_TIME 930.0e-6 // 930 usec pulse\r
+#define ROOMBA_1_PULSE_TIME 2790.0e-6 // 2790 usec pulse\r
+#define ROOMBA_0_PAUSE_TIME 2790.0e-6 // 2790 usec pause\r
+#define ROOMBA_1_PAUSE_TIME 930.0e-6 // 930 usec pause\r
+#define ROOMBA_FRAME_REPEAT_PAUSE_TIME 18.0e-3 // frame repeat after 18ms\r
+#define ROOMBA_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define ROOMBA_ADDRESS_LEN 0 // read 0 address bits\r
+#define ROOMBA_COMMAND_OFFSET 0 // skip 0 bits\r
+#define ROOMBA_COMMAND_LEN 7 // read 7 bits\r
+#define ROOMBA_COMPLETE_DATA_LEN 7 // complete length\r
+#define ROOMBA_STOP_BIT 0 // has stop bit\r
+#define ROOMBA_LSB 0 // MSB...LSB\r
+#define ROOMBA_FLAGS 0 // flags\r
+#define ROOMBA_FRAMES 8 // ROOMBA sends 8 frames (this is a lie, but more comfortable)\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * RC-MM (32, 24, or 12 bit)\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define RCMM32_START_BIT_PULSE_TIME 500.0e-6 // 500 usec pulse\r
+#define RCMM32_START_BIT_PAUSE_TIME 220.0e-6 // 220 usec pause\r
+#define RCMM32_PULSE_TIME 230.0e-6 // 230 usec pulse\r
+#define RCMM32_00_PAUSE_TIME 220.0e-6 // 220 usec pause\r
+#define RCMM32_01_PAUSE_TIME 370.0e-6 // 370 usec pause\r
+#define RCMM32_10_PAUSE_TIME 540.0e-6 // 540 usec pause\r
+#define RCMM32_11_PAUSE_TIME 720.0e-6 // 720 usec pause\r
+\r
+#define RCMM32_FRAME_REPEAT_PAUSE_TIME 80.0e-3 // frame repeat after 80 ms\r
+#define RCMM32_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define RCMM32_ADDRESS_LEN 16 // read 16 address bits\r
+#define RCMM32_COMMAND_OFFSET 17 // skip 17 bits\r
+#define RCMM32_COMMAND_LEN 15 // read 15 bits\r
+#define RCMM32_COMPLETE_DATA_LEN 32 // complete length\r
+#define RCMM32_STOP_BIT 1 // has stop bit\r
+#define RCMM32_LSB 0 // LSB...MSB\r
+#define RCMM32_FLAGS 0 // flags\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * PENTAX:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define PENTAX_START_BIT_PULSE_TIME 13000.0e-6 // 13 msec pulse\r
+#define PENTAX_START_BIT_PAUSE_TIME 3000.0e-6 // 3 msec pause\r
+#define PENTAX_PULSE_TIME 1000.0e-6 // 1 msec pulse\r
+#define PENTAX_1_PAUSE_TIME 3000.0e-6 // 3 msec pause\r
+#define PENTAX_0_PAUSE_TIME 1000.0e-6 // 1 msec pause\r
+#define PENTAX_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms\r
+#define PENTAX_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define PENTAX_ADDRESS_LEN 0 // read 0 address bits\r
+#define PENTAX_COMMAND_OFFSET 0 // skip 0 bits\r
+#define PENTAX_COMMAND_LEN 6 // read 6 bits\r
+#define PENTAX_COMPLETE_DATA_LEN 6 // complete length\r
+#define PENTAX_STOP_BIT 1 // has stop bit\r
+#define PENTAX_LSB 0 // LSB...MSB\r
+#define PENTAX_FLAGS 0 // flags\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * RADIO1 - e.g. Tevion\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse\r
+#define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse\r
+#define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse\r
+#define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause\r
+#define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse\r
+#define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause\r
+\r
+#define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms\r
+#define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits\r
+#define RADIO1_ADDRESS_LEN 16 // read 16 address bits\r
+#define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits\r
+#define RADIO1_COMMAND_LEN 3 // read 3 command bits\r
+#define RADIO1_COMPLETE_DATA_LEN 23 // complete length\r
+#define RADIO1_STOP_BIT 1 // has stop bit\r
+#define RADIO1_LSB 1 // LSB...MSB?\r
+#define RADIO1_FLAGS 0 // flags\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Frame Repetitions:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms\r
\r
#endif // _IRMP_PROTOCOLS_H_\r
projects / irmp.git / blobdiff