*\r
* Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmpconfig.h,v 1.69 2011/05/20 09:31:25 fm Exp $\r
+ * $Id: irmpconfig.h,v 1.76 2011/09/22 10:19:44 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
\r
// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r
-#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r
-#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r
-#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~50 bytes\r
-#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~150 bytes\r
+#define IRMP_SUPPORT_NEC16_PROTOCOL 1 // NEC16 >= 10000 ~100 bytes\r
+#define IRMP_SUPPORT_NEC42_PROTOCOL 1 // NEC42 >= 10000 ~300 bytes\r
#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes\r
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r
-#define IRMP_SUPPORT_THOMSON_PROTOCOL 1 // Thomson >= 10000 ~250 bytes\r
+#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r
#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
-#define IRMP_SUPPORT_MERLIN_PROTOCOL 1 // Merlin keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
-#define IRMP_SUPPORT_IMON_PROTOCOL 0 // IMON keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r
#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r
* Change hardware pin here:\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
-#ifdef PIC_CCS_COMPILER // PIC CCS Compiler:\r
+#if defined (PIC_C18) // Microchip C18 Compiler\r
+#include <p18cxxx.h> // main PIC18 h file\r
+#define IRMP_PIN PORTBbits.RB4 // use RB4 as IR input on PIC\r
+#define input(x) (x)\r
\r
-#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
-\r
-#else // AVR:\r
+#elif defined (PIC_CCS_COMPILER) // PIC CCS Compiler:\r
+#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r
\r
+#else // AVR:\r
#define IRMP_PORT PORTB\r
#define IRMP_DDR DDRB\r
#define IRMP_PIN PINB\r
-#define IRMP_BIT 6 // use PB6 as IR input on AVR\r
-\r
+#define IRMP_BIT 6 // use PB6 as IR input on AVR\r
#define input(x) ((x) & (1 << IRMP_BIT))\r
#endif\r
\r
#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r
#endif\r
\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not (default),\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Use Callbacks to indicate input signal\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define IRMP_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0\r
+\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
* DO NOT CHANGE THE FOLLOWING LINES !\r
*---------------------------------------------------------------------------------------------------------------------------------------------------\r
*/\r
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
-#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
-#undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
-#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
+# warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r
+# define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r
#endif\r
\r
#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
-#warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)\r
-#undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r
-#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r
+# warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r
+# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r
#endif\r
\r
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
-#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)\r
-#undef IRMP_SUPPORT_RECS80_PROTOCOL\r
-#define IRMP_SUPPORT_RECS80_PROTOCOL 0\r
+# warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_RECS80_PROTOCOL\r
+# define IRMP_SUPPORT_RECS80_PROTOCOL 0\r
#endif\r
\r
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000\r
-#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)\r
-#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
-#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r
+# warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)\r
+# undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r
+# define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r
#endif\r
\r
#if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000\r
-#warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)\r
-#undef IRMP_SUPPORT_LEGO_PROTOCOL\r
-#define IRMP_SUPPORT_LEGO_PROTOCOL 0\r
+# warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)\r
+# undef IRMP_SUPPORT_LEGO_PROTOCOL\r
+# define IRMP_SUPPORT_LEGO_PROTOCOL 0\r
#endif\r
\r
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
-#warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
-#undef IRMP_SUPPORT_NEC_PROTOCOL\r
-#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+# warning JVC protocol needs also NEC protocol, NEC protocol enabled\r
+# undef IRMP_SUPPORT_NEC_PROTOCOL\r
+# define IRMP_SUPPORT_NEC_PROTOCOL 1\r
#endif\r
\r
#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
-#warning NEC16 protocol needs also NEC protocol, NEC protocol enabled\r
-#undef IRMP_SUPPORT_NEC_PROTOCOL\r
-#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+# warning NEC16 protocol needs also NEC protocol, NEC protocol enabled\r
+# undef IRMP_SUPPORT_NEC_PROTOCOL\r
+# define IRMP_SUPPORT_NEC_PROTOCOL 1\r
#endif\r
\r
#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
-#warning NEC42 protocol needs also NEC protocol, NEC protocol enabled\r
-#undef IRMP_SUPPORT_NEC_PROTOCOL\r
-#define IRMP_SUPPORT_NEC_PROTOCOL 1\r
+# warning NEC42 protocol needs also NEC protocol, NEC protocol enabled\r
+# undef IRMP_SUPPORT_NEC_PROTOCOL\r
+# define IRMP_SUPPORT_NEC_PROTOCOL 1\r
#endif\r
\r
#if F_INTERRUPTS > 20000\r