*\r
* Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmp.h,v 1.43 2010/08/31 15:22:24 fm Exp $\r
+ * $Id: irmp.h,v 1.52 2011/02/22 13:07:13 fm Exp $\r
*\r
* ATMEGA88 @ 8 MHz\r
*\r
#define IRMP_TIMEOUT_TIME 16500.0e-6 // timeout after 16.5 ms darkness\r
#define IRMP_TIMEOUT_TIME_MS 16500L // timeout after 16.5 ms darkness\r
\r
+#if IRMP_SUPPORT_NIKON_PROTOCOL == 1\r
+#define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)\r
+#define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness\r
+typedef uint16_t PAUSE_LEN;\r
+#define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)\r
+#else\r
#if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254\r
typedef uint16_t PAUSE_LEN;\r
#else\r
typedef uint8_t PAUSE_LEN;\r
#endif\r
+#endif\r
\r
#define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)\r
\r
#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)\r
#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba\r
#define IRMP_RC5_PROTOCOL 7 // Philips etc\r
-#define IRMP_DENON_PROTOCOL 8 // Denon\r
+#define IRMP_DENON_PROTOCOL 8 // Denon, Sharp\r
#define IRMP_RC6_PROTOCOL 9 // Philips etc\r
#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37\r
#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC\r
#define IRMP_RCCAR_PROTOCOL 19 // RC Car\r
#define IRMP_JVC_PROTOCOL 20 // JVC\r
#define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX\r
+#define IRMP_NIKON_PROTOCOL 22 // Nikon\r
+#define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver\r
+#define IRMP_IR60_PROTOCOL 24 // IR60 (SAB2008)\r
+#define IRMP_KATHREIN_PROTOCOL 25 // Kathrein\r
\r
// some flags of struct IRMP_PARAMETER:\r
#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01\r
\r
#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause\r
#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+\r
#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)\r
#define RC5_ADDRESS_LEN 5 // read 5 address bits\r
#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)\r
#define RC5_LSB 0 // MSB...LSB\r
#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags\r
\r
-#define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse\r
-#define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause\r
-#define DENON_0_PAUSE_TIME 775.0e-6 // 775 usec pause\r
+#define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory\r
+#define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory\r
+#define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory\r
#define DENON_FRAMES 2 // DENON sends each frame 2 times\r
#define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms\r
#define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms\r
#define BANG_OLUFSEN_LSB 0 // MSB...LSB\r
#define BANG_OLUFSEN_FLAGS 0 // flags\r
\r
-#define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
-#define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
-#define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
-#define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit\r
-#define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB\r
-#define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+#define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause\r
+#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit\r
+#define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms\r
+#define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit\r
+#define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB\r
+#define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
\r
#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times\r
#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms\r
#define NOKIA_COMMAND_LEN 8 // read 8 command bits\r
#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits\r
\r
-#define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause\r
-#define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
-#define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits\r
-#define SIEMENS_ADDRESS_LEN 12 // read 12 address bits\r
-#define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit)\r
-#define SIEMENS_COMMAND_LEN 7 // read 7 command bits\r
-#define SIEMENS_COMPLETE_DATA_LEN 23 // complete length\r
-#define SIEMENS_STOP_BIT 0 // has no stop bit\r
-#define SIEMENS_LSB 0 // MSB...LSB\r
-#define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+#define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60\r
+#define IR60_ADDRESS_OFFSET 0 // skip 1 bits\r
+#define IR60_ADDRESS_LEN 0 // read 0 address bits\r
+#define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)\r
+#define IR60_COMMAND_LEN 7 // read 6 command bits\r
+#define IR60_COMPLETE_DATA_LEN 7 // complete length\r
+\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse\r
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause\r
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause\r
+#define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms\r
+#define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit\r
+#define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB\r
+#define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags\r
+\r
+#define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define RUWIDO_ADDRESS_LEN 9 // read 9 address bits\r
+#define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits\r
+#define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit\r
+#define RUWIDO_COMPLETE_DATA_LEN 17 // complete length\r
+\r
+#define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define SIEMENS_ADDRESS_LEN 11 // read 11 bits\r
+#define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits\r
+#define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit\r
+#define SIEMENS_COMPLETE_DATA_LEN 22 // complete length\r
\r
#define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse\r
#define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause\r
#define JVC_LSB 1 // LSB...MSB\r
#define JVC_FLAGS 0 // flags\r
\r
+#define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse\r
+#define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause\r
+#define NIKON_PULSE_TIME 500.0e-6 // 520 usec pulse\r
+#define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause\r
+#define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause\r
+#define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms\r
+#define NIKON_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define NIKON_ADDRESS_LEN 0 // read 0 address bits\r
+#define NIKON_COMMAND_OFFSET 0 // skip 0 bits\r
+#define NIKON_COMMAND_LEN 2 // read 2 bits\r
+#define NIKON_COMPLETE_DATA_LEN 2 // complete length\r
+#define NIKON_STOP_BIT 1 // has stop bit\r
+#define NIKON_LSB 0 // LSB...MSB\r
+#define NIKON_FLAGS 0 // flags\r
+\r
+#define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
+#define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause\r
+#define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse\r
+#define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause\r
+#define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse\r
+#define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause\r
+#define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)\r
+#define KATHREIN_FRAMES 1 // Kathrein sends 1 frame\r
+#define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms\r
+#define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms\r
+#define KATHREIN_ADDRESS_OFFSET 0 // skip 0 bits\r
+#define KATHREIN_ADDRESS_LEN 0 // read 0 address bits\r
+#define KATHREIN_COMMAND_OFFSET 0 // skip 0 bits\r
+#define KATHREIN_COMMAND_LEN 12 // read 10 bits\r
+#define KATHREIN_COMPLETE_DATA_LEN 13 // complete length\r
+#define KATHREIN_STOP_BIT 1 // has stop bit\r
+#define KATHREIN_LSB 0 // MSB\r
+#define KATHREIN_FLAGS 0 // flags\r
+\r
#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms\r
// KASEIKYO: automatic repetition after 75ms\r
\r
projects / irmp.git / blobdiff