*\r
* Copyright (c) 2009-2015 Frank Meyer - frank(at)fli4l.de\r
*\r
- * $Id: irmp.c,v 1.171 2015/04/23 12:46:13 fm Exp $\r
+ * $Id: irmp.c,v 1.172 2015/05/27 09:33:14 fm Exp $\r
*\r
* Supported AVR mikrocontrollers:\r
*\r
IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1 || \\r
IRMP_SUPPORT_IR60_PROTOCOL == 1 || \\r
IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1 || \\r
+ IRMP_SUPPORT_MERLIN_PROTOCOL == 1 || \\r
IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
# define IRMP_SUPPORT_MANCHESTER 1\r
#else\r
#define NUBERT_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
#define NUBERT_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
\r
+#define FAN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define FAN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define FAN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define FAN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define FAN_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define FAN_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define FAN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define FAN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define FAN_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define FAN_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+#define FAN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
+#define FAN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
+\r
#define SPEAKER_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
#define SPEAKER_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)\r
#define SPEAKER_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)\r
#define A1TVBOX_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
#define A1TVBOX_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
\r
+#define MERLIN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define MERLIN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define MERLIN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
+#define MERLIN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
+#define MERLIN_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define MERLIN_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+#define MERLIN_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)\r
+#define MERLIN_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)\r
+\r
#define ORTEK_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
#define ORTEK_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)\r
#define ORTEK_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)\r
static const char proto_samsung48[] PROGMEM = "SAMSG48";\r
static const char proto_merlin[] PROGMEM = "MERLIN";\r
static const char proto_pentax[] PROGMEM = "PENTAX";\r
+static const char proto_fan[] PROGMEM = "FAN";\r
\r
static const char proto_radio1[] PROGMEM = "RADIO1";\r
\r
proto_samsung48,\r
proto_merlin,\r
proto_pentax,\r
+ proto_fan,\r
proto_radio1\r
};\r
\r
\r
#endif\r
\r
+#if IRMP_SUPPORT_FAN_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER fan_param =\r
+{\r
+ IRMP_FAN_PROTOCOL, // protocol: ir protocol\r
+ FAN_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1\r
+ FAN_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1\r
+ FAN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1\r
+ FAN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1\r
+ FAN_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0\r
+ FAN_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0\r
+ FAN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0\r
+ FAN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0\r
+ FAN_ADDRESS_OFFSET, // address_offset: address offset\r
+ FAN_ADDRESS_OFFSET + FAN_ADDRESS_LEN, // address_end: end of address\r
+ FAN_COMMAND_OFFSET, // command_offset: command offset\r
+ FAN_COMMAND_OFFSET + FAN_COMMAND_LEN, // command_end: end of command\r
+ FAN_COMPLETE_DATA_LEN, // complete_len: complete length of frame\r
+ FAN_STOP_BIT, // stop_bit: flag: frame has NO stop bit\r
+ FAN_LSB, // lsb_first: flag: LSB first\r
+ FAN_FLAGS // flags: some flags\r
+};\r
+\r
+#endif\r
+\r
#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1\r
\r
static const PROGMEM IRMP_PARAMETER speaker_param =\r
\r
#endif\r
\r
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1\r
+\r
+static const PROGMEM IRMP_PARAMETER merlin_param =\r
+{\r
+ IRMP_MERLIN_PROTOCOL, // protocol: ir protocol\r
+\r
+ MERLIN_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse\r
+ MERLIN_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse\r
+ MERLIN_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause\r
+ MERLIN_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause\r
+ 0, // pulse_0_len_min: here: not used\r
+ 0, // pulse_0_len_max: here: not used\r
+ 0, // pause_0_len_min: here: not used\r
+ 0, // pause_0_len_max: here: not used\r
+ MERLIN_ADDRESS_OFFSET, // address_offset: address offset\r
+ MERLIN_ADDRESS_OFFSET + MERLIN_ADDRESS_LEN, // address_end: end of address\r
+ MERLIN_COMMAND_OFFSET, // command_offset: command offset\r
+ MERLIN_COMMAND_OFFSET + MERLIN_COMMAND_LEN, // command_end: end of command\r
+ MERLIN_COMPLETE_DATA_LEN, // complete_len: complete length of frame\r
+ MERLIN_STOP_BIT, // stop_bit: flag: frame has stop bit\r
+ MERLIN_LSB, // lsb_first: flag: LSB first\r
+ MERLIN_FLAGS // flags: some flags\r
+};\r
+\r
+#endif\r
+\r
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1\r
\r
static const PROGMEM IRMP_PARAMETER ortek_param =\r
else\r
#endif // IRMP_SUPPORT_NUBERT_PROTOCOL == 1\r
\r
+#if IRMP_SUPPORT_FAN_PROTOCOL == 1\r
+ if (irmp_pulse_time >= FAN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FAN_START_BIT_PULSE_LEN_MAX &&\r
+ irmp_pause_time >= FAN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FAN_START_BIT_PAUSE_LEN_MAX)\r
+ { // it's FAN\r
+#ifdef ANALYZE\r
+ ANALYZE_PRINTF ("protocol = FAN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+ FAN_START_BIT_PULSE_LEN_MIN, FAN_START_BIT_PULSE_LEN_MAX,\r
+ FAN_START_BIT_PAUSE_LEN_MIN, FAN_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+ irmp_param_p = (IRMP_PARAMETER *) &fan_param;\r
+ }\r
+ else\r
+#endif // IRMP_SUPPORT_FAN_PROTOCOL == 1\r
+\r
#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1\r
if (irmp_pulse_time >= SPEAKER_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SPEAKER_START_BIT_PULSE_LEN_MAX &&\r
irmp_pause_time >= SPEAKER_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SPEAKER_START_BIT_PAUSE_LEN_MAX)\r
else\r
#endif // IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1\r
\r
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1 // check MERLIN before RUWIDO!\r
+ if (irmp_pulse_time >= MERLIN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MERLIN_START_BIT_PULSE_LEN_MAX &&\r
+ irmp_pause_time >= MERLIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MERLIN_START_BIT_PAUSE_LEN_MAX)\r
+ { // it's MERLIN\r
+#ifdef ANALYZE\r
+ ANALYZE_PRINTF ("protocol = MERLIN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",\r
+ MERLIN_START_BIT_PULSE_LEN_MIN, MERLIN_START_BIT_PULSE_LEN_MAX,\r
+ MERLIN_START_BIT_PAUSE_LEN_MIN, MERLIN_START_BIT_PAUSE_LEN_MAX);\r
+#endif // ANALYZE\r
+ irmp_param_p = (IRMP_PARAMETER *) &merlin_param;\r
+ last_pause = 0;\r
+ last_value = 1;\r
+ }\r
+ else\r
+#endif // IRMP_SUPPORT_MERLIN_PROTOCOL == 1\r
+\r
#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1\r
if (((irmp_pulse_time >= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX) ||\r
(irmp_pulse_time >= 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX)) &&\r
}\r
else\r
#endif\r
+#if IRMP_SUPPORT_FAN_PROTOCOL == 1\r
+ if (irmp_param.protocol == IRMP_FAN_PROTOCOL && // FAN has no stop bit.\r
+ irmp_bit >= FAN_COMPLETE_DATA_LEN - 1) // last bit in frame\r
+ { // yes, break and close this frame\r
+ if (irmp_pulse_time <= FAN_0_PULSE_LEN_MAX && irmp_pause_time >= FAN_0_PAUSE_LEN_MIN)\r
+ {\r
+ ANALYZE_PRINTF ("Generating virtual stop bit\n");\r
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)\r
+ }\r
+ else if (irmp_pulse_time >= FAN_1_PULSE_LEN_MIN && irmp_pause_time >= FAN_1_PAUSE_LEN_MIN)\r
+ {\r
+ ANALYZE_PRINTF ("Generating virtual stop bit\n");\r
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)\r
+ }\r
+ }\r
+ else\r
+#endif\r
#if IRMP_SUPPORT_SERIAL == 1\r
// NETBOX generates no stop bit, here is the timeout condition:\r
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL) && irmp_param.protocol == IRMP_NETBOX_PROTOCOL &&\r
NUBERT_0_PULSE_LEN_MIN, NUBERT_0_PULSE_LEN_MAX, NUBERT_0_PAUSE_LEN_MIN, NUBERT_0_PAUSE_LEN_MAX,\r
NUBERT_1_PULSE_LEN_MIN, NUBERT_1_PULSE_LEN_MAX, NUBERT_1_PAUSE_LEN_MIN, NUBERT_1_PAUSE_LEN_MAX);\r
\r
+ printf ("FAN 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n",\r
+ FAN_START_BIT_PULSE_LEN_MIN, FAN_START_BIT_PULSE_LEN_MAX, FAN_START_BIT_PAUSE_LEN_MIN, FAN_START_BIT_PAUSE_LEN_MAX,\r
+ FAN_0_PULSE_LEN_MIN, FAN_0_PULSE_LEN_MAX, FAN_0_PAUSE_LEN_MIN, FAN_0_PAUSE_LEN_MAX,\r
+ FAN_1_PULSE_LEN_MIN, FAN_1_PULSE_LEN_MAX, FAN_1_PAUSE_LEN_MIN, FAN_1_PAUSE_LEN_MAX);\r
+\r
printf ("SPEAKER 1 %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d %3d - %3d\n",\r
SPEAKER_START_BIT_PULSE_LEN_MIN, SPEAKER_START_BIT_PULSE_LEN_MAX, SPEAKER_START_BIT_PAUSE_LEN_MIN, SPEAKER_START_BIT_PAUSE_LEN_MAX,\r
SPEAKER_0_PULSE_LEN_MIN, SPEAKER_0_PULSE_LEN_MAX, SPEAKER_0_PAUSE_LEN_MIN, SPEAKER_0_PAUSE_LEN_MAX,\r
projects / irmp.git / blobdiff