version 2.0.0-pre1: added NEC42 protocol

[irmp.git] / irmpconfig.h

diff --git a/irmpconfig.h b/irmpconfig.h
index 9da6ce7cf89c3e09701be994fa62441abbeff1f9..a34aebba7dd8ca81affd603c729492e17bf3d971 100644 (file)
--- a/irmpconfig.h
+++ b/irmpconfig.h
@@ -3,7 +3,7 @@
  *\r
  * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
  *\r
- * $Id: irmpconfig.h,v 1.61 2011/02/25 15:24:06 fm Exp $\r
+ * $Id: irmpconfig.h,v 1.64 2011/03/10 12:54:37 fm Exp $\r
  *\r
  * ATMEGA88 @ 8 MHz\r
  *\r
@@ -19,12 +19,12 @@
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
  * Change F_INTERRUPTS if you change the number of interrupts per second,\r
- * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.\r
- * A value above 15000 costs additional program space, absolut maximum value is 20000.\r
+ * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
+ * A value above 15000 costs additional program space, absolute maximum value is 20000.\r
  *---------------------------------------------------------------------------------------------------------------------------------------------------\r
  */\r
 #ifndef F_INTERRUPTS\r
-#define F_INTERRUPTS                            10000   // interrupts per second, min: 10000, max: 20000\r
+#define F_INTERRUPTS                            15000   // interrupts per second, min: 10000, max: 20000, typ: 15000\r
 #endif\r
 \r
 /*---------------------------------------------------------------------------------------------------------------------------------------------------\r
@@ -35,23 +35,26 @@
  * 0 disable decoder\r
  *\r
  * The standard decoders are enabled per default.\r
- * Some less common protocols are disabled here, you need to enable them manually.\r
+ * Less common protocols are disabled here, you need to enable them manually.\r
  *\r
  * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
  * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
  *---------------------------------------------------------------------------------------------------------------------------------------------------\r
  */\r
 \r
-//      Protocol                                Enable  Remarks                 F_INTERRUPTS            Program Space\r
+// typical protocols, disable here!             Enable  Remarks                 F_INTERRUPTS            Program Space\r
 #define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~150 bytes\r
 #define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~300 bytes\r
 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsung32  >= 10000                 ~300 bytes\r
 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // Matsushita           >= 10000                  ~50 bytes\r
 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes\r
 #define IRMP_SUPPORT_DENON_PROTOCOL             1       // DENON, Sharp         >= 10000                 ~250 bytes\r
-#define IRMP_SUPPORT_JVC_PROTOCOL               1       // JVC                  >= 10000                 ~150 bytes\r
-#define IRMP_SUPPORT_NEC16_PROTOCOL             1       // NEC16                >= 10000                 ~150 bytes\r
+\r
+// more protocols, enable here!                 Enable  Remarks                 F_INTERRUPTS            Program Space\r
 #define IRMP_SUPPORT_RC5_PROTOCOL               0       // RC5                  >= 10000                 ~250 bytes\r
+#define IRMP_SUPPORT_JVC_PROTOCOL               0       // JVC                  >= 10000                 ~150 bytes\r
+#define IRMP_SUPPORT_NEC16_PROTOCOL             0       // NEC16                >= 10000                  ~50 bytes\r
+#define IRMP_SUPPORT_NEC42_PROTOCOL             0       // NEC42                >= 10000                 ~150 bytes\r
 #define IRMP_SUPPORT_RC6_PROTOCOL               0       // RC6 & RC6A           >= 10000                 ~250 bytes\r
 #define IRMP_SUPPORT_IR60_PROTOCOL              0       // IR60 (SAB2008)       >= 10000                 ~300 bytes\r
 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // Grundig              >= 10000                 ~300 bytes\r
@@ -59,7 +62,7 @@
 #define IRMP_SUPPORT_KATHREIN_PROTOCOL          0       // Kathrein             >= 10000                 ~200 bytes\r
 #define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // NUBERT               >= 10000                  ~50 bytes\r
 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // Bang & Olufsen       >= 10000                 ~200 bytes\r
-#define IRMP_SUPPORT_NIKON_PROTOCOL             0       // NIKON                >= 10000                 ~250 bytes\r
+#define IRMP_SUPPORT_NIKON_PROTOCOL             0       // NIKON camera         >= 10000                 ~250 bytes\r
 #define IRMP_SUPPORT_NETBOX_PROTOCOL            0       // Netbox keyboard      >= 10000                 ~400 bytes (PROTOTYPE!)\r
 #define IRMP_SUPPORT_IMON_PROTOCOL              0       // IMON keyboard        >= 10000                 ~400 bytes (PROTOTYPE!)\r
 #define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)  ~150 bytes (~400 in combination with RC5)\r
@@ -129,8 +132,20 @@
 #define IRMP_SUPPORT_NEC_PROTOCOL               1\r
 #endif\r
 \r
+#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+#warning NEC16 protocol needs also NEC protocol, NEC protocol enabled\r
+#undef IRMP_SUPPORT_NEC_PROTOCOL\r
+#define IRMP_SUPPORT_NEC_PROTOCOL               1\r
+#endif\r
+\r
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r
+#warning NEC42 protocol needs also NEC protocol, NEC protocol enabled\r
+#undef IRMP_SUPPORT_NEC_PROTOCOL\r
+#define IRMP_SUPPORT_NEC_PROTOCOL               1\r
+#endif\r
+\r
 #if F_INTERRUPTS > 20000\r
-#error F_INTERRUPTS too high (should be not more than 20000)\r
+#error F_INTERRUPTS too high (should be not greater than 20000)\r
 #endif\r
 \r
 #endif /* _WC_IRMPCONFIG_H_ */\r