X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/003c1008723c140e340eab96960afe47ce8f3115..11ef72344083c0dd980b945e180ec41992935a10:/irmpprotocols.h diff --git a/irmpprotocols.h b/irmpprotocols.h index 763e2b5..127268d 100644 --- a/irmpprotocols.h +++ b/irmpprotocols.h @@ -5,7 +5,7 @@ * * Copyright (c) 2013-2015 Frank Meyer - frank(at)fli4l.de * - * $Id: irmpprotocols.h,v 1.32 2015/04/23 12:46:13 fm Exp $ + * $Id: irmpprotocols.h,v 1.38 2015/09/20 10:51:37 fm Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -68,9 +68,13 @@ #define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits) #define IRMP_MERLIN_PROTOCOL 42 // Merlin (Pollin 620 185) #define IRMP_PENTAX_PROTOCOL 43 // Pentax camera -#define IRMP_RADIO1_PROTOCOL 44 // Radio protocol (experimental status), do not use it yet! +#define IRMP_FAN_PROTOCOL 44 // FAN (ventilator), very similar to NUBERT, but last bit is data bit instead of stop bit +#define IRMP_S100_PROTOCOL 45 // very similar to RC5, but 14 instead of 13 data bits +#define IRMP_ACP24_PROTOCOL 46 // Stiebel Eltron ACP24 air conditioner +#define IRMP_TECHNICS_PROTOCOL 47 // Technics, similar to Matsushita, but 22 instead of 24 bits +#define IRMP_RADIO1_PROTOCOL 48 // Radio protocol (experimental status), do not use it yet! -#define IRMP_N_PROTOCOLS 44 // number of supported protocols +#define IRMP_N_PROTOCOLS 48 // number of supported protocols /*--------------------------------------------------------------------------------------------------------------------------------------------------- * timing constants: @@ -218,6 +222,14 @@ typedef uint8_t PAUSE_LEN; #define MATSUSHITA_LSB 1 // LSB...MSB? #define MATSUSHITA_FLAGS 0 // flags +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * TECHNICS: same timings as MATSUSHITA + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#define TECHNICS_ADDRESS_LEN 0 // read 0 address bits +#define TECHNICS_COMMAND_LEN 11 // read 11 bits +#define TECHNICS_COMPLETE_DATA_LEN 22 // complete length + /*--------------------------------------------------------------------------------------------------------------------------------------------------- * KASEIKYO: *--------------------------------------------------------------------------------------------------------------------------------------------------- @@ -274,6 +286,22 @@ typedef uint8_t PAUSE_LEN; #define RC5_LSB 0 // MSB...LSB #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * S100: very similar to RC5, but 14 insted of 13 bits + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#define S100_BIT_TIME 889.0e-6 // 889 usec pulse/pause +#define S100_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms + +#define S100_ADDRESS_OFFSET 1 // skip 1 bit (2nd start) +#define S100_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits +#define S100_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address) +#define S100_COMMAND_LEN 7 // read 7 command bits +#define S100_COMPLETE_DATA_LEN 14 // complete length +#define S100_STOP_BIT 0 // has no stop bit +#define S100_LSB 0 // MSB...LSB +#define S100_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags + /*--------------------------------------------------------------------------------------------------------------------------------------------------- * DENON: *--------------------------------------------------------------------------------------------------------------------------------------------------- @@ -353,17 +381,43 @@ typedef uint8_t PAUSE_LEN; #define NUBERT_LSB 0 // MSB? #define NUBERT_FLAGS 0 // flags +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * FAN: (ventilator) + * + * Similar to NUBERT, but + * - has data bit instead of stop bit + * - has NO frame repetition + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#define FAN_START_BIT_PULSE_TIME 1280.0e-6 // 1280 usec pulse +#define FAN_START_BIT_PAUSE_TIME 380.0e-6 // 380 usec pause +#define FAN_1_PULSE_TIME 1280.0e-6 // 1280 usec pulse +#define FAN_1_PAUSE_TIME 380.0e-6 // 380 usec pause +#define FAN_0_PULSE_TIME 380.0e-6 // 380 usec pulse +#define FAN_0_PAUSE_TIME 1280.0e-6 // 1280 usec pause +#define FAN_FRAMES 1 // FAN sends only 1 frame (NUBERT sends 2) +#define FAN_AUTO_REPETITION_PAUSE_TIME 6.6e-3 // auto repetition after 6.6ms +#define FAN_FRAME_REPEAT_PAUSE_TIME 6.6e-3 // frame repeat after 6.6ms +#define FAN_ADDRESS_OFFSET 0 // skip 0 bits +#define FAN_ADDRESS_LEN 0 // read 0 address bits +#define FAN_COMMAND_OFFSET 0 // skip 0 bits +#define FAN_COMMAND_LEN 11 // read 10 bits +#define FAN_COMPLETE_DATA_LEN 11 // complete length +#define FAN_STOP_BIT 0 // has NO stop bit +#define FAN_LSB 0 // MSB +#define FAN_FLAGS 0 // flags + /*--------------------------------------------------------------------------------------------------------------------------------------------------- * SPEAKER: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 1340 usec pulse -#define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 340 usec pause -#define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1340 usec pulse -#define SPEAKER_1_PAUSE_TIME 440.0e-6 // 340 usec pause -#define SPEAKER_0_PULSE_TIME 440.0e-6 // 500 usec pulse -#define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1300 usec pause -#define SPEAKER_FRAMES 2 // Nubert sends 2 frames +#define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 440 usec pulse +#define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 1250 usec pause +#define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1250 usec pulse +#define SPEAKER_1_PAUSE_TIME 440.0e-6 // 440 usec pause +#define SPEAKER_0_PULSE_TIME 440.0e-6 // 440 usec pulse +#define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1250 usec pause +#define SPEAKER_FRAMES 2 // SPEAKER sends 2 frames #define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms #define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms #define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits @@ -686,10 +740,10 @@ typedef uint8_t PAUSE_LEN; * See notes for A1TVBOX *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 300 usec pulse -#define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 340 usec pause -#define MERLIN_BIT_PULSE_TIME 210.0e-6 // 250 usec pulse -#define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 150 usec pulse +#define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse +#define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 429 usec pause +#define MERLIN_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse +#define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 210 usec pulse #define MERLIN_STOP_BIT 0 // has no stop bit #define MERLIN_LSB 0 // MSB...LSB #define MERLIN_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags @@ -799,6 +853,25 @@ typedef uint8_t PAUSE_LEN; #define PENTAX_LSB 0 // LSB...MSB #define PENTAX_FLAGS 0 // flags +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * ACP24: Stiebel Eltron ACP24 air conditioner + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#define ACP24_START_BIT_PULSE_TIME 390.0e-6 // 390 usec pulse +#define ACP24_START_BIT_PAUSE_TIME 950.0e-6 // 950 usec pause +#define ACP24_PULSE_TIME 390.0e-6 // 390 usec pulse +#define ACP24_1_PAUSE_TIME 1300.0e-6 // 1300 usec pause +#define ACP24_0_PAUSE_TIME 950.0e-6 // 950 usec pause +#define ACP24_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms? +#define ACP24_ADDRESS_OFFSET 0 // skip 0 bits +#define ACP24_ADDRESS_LEN 0 // read 6 address bits +#define ACP24_COMMAND_OFFSET 0 // skip 6 bits +#define ACP24_COMMAND_LEN 0 // read 0 bits (70 bits will be read and compressed by special routine) +#define ACP24_COMPLETE_DATA_LEN 70 // complete length +#define ACP24_STOP_BIT 1 // has stop bit +#define ACP24_LSB 0 // LSB...MSB +#define ACP24_FLAGS 0 // flags + /*--------------------------------------------------------------------------------------------------------------------------------------------------- * RADIO1 - e.g. Tevion *---------------------------------------------------------------------------------------------------------------------------------------------------