X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/2ac088b274ff067eae9e5e391c9b3fddb5929624..c2b70f0bf049613af736f73d9117327a5e3cf00b:/irsndconfig.h diff --git a/irsndconfig.h b/irsndconfig.h index b119779..e661f37 100644 --- a/irsndconfig.h +++ b/irsndconfig.h @@ -3,11 +3,9 @@ * * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H! * - * Copyright (c) 2010-2013 Frank Meyer - frank(at)fli4l.de + * Copyright (c) 2010-2015 Frank Meyer - frank(at)fli4l.de * - * $Id: irsndconfig.h,v 1.47 2013/01/17 07:33:13 fm Exp $ - * - * ATMEGA88 @ 8 MHz + * $Id: irsndconfig.h,v 1.73 2015/05/29 08:24:37 fm Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,6 +21,8 @@ # error please include only irsnd.h, not irsndconfig.h #endif +//~ #define IRSND_DEBUG 1 // activate debugging + /*--------------------------------------------------------------------------------------------------------------------------------------------------- * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000 *--------------------------------------------------------------------------------------------------------------------------------------------------- @@ -45,9 +45,9 @@ #define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes #define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes -#define IRSND_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~200 bytes // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRSND_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~200 bytes #define IRSND_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~150 bytes #define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~250 bytes #define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 ~250 bytes @@ -62,20 +62,47 @@ // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space #define IRSND_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~100 bytes +#define IRSND_SUPPORT_FAN_PROTOCOL 1 // FAN (ventilator) >= 10000 ~100 bytes +#define IRSND_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER >= 10000 ~100 bytes #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 ~250 bytes -#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~100 bytes -#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~100 bytes +#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 15000 ~100 bytes +#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 15000 ~100 bytes #define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes #define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes #define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET! +#define IRSND_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 DON'T CHANGE, NOT SUPPORTED YET! +#define IRSND_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes #define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes #define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes -#define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 DON'T CHANGE, NOT SUPPORTED YET! +#define IRSND_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes +#define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~250 bytes #define IRSND_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~200 bytes #define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes +#define IRSND_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 DON'T CHANGE, NOT SUPPORTED YET! +#define IRSND_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~150 bytes. +#define IRSND_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes +#define IRSND_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes +#define IRSND_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~150 bytes + /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * AVR section: + * AVR XMega section: + * + * Change hardware pin here: IRSND_XMEGA_OC0A = OC0A on ATxmegas supporting OC0A, e.g. ATxmega128A1U + * IRSND_XMEGA_OC0B = OC0B on ATxmegas supporting OC0B, e.g. ATxmega128A1U + * IRSND_XMEGA_OC0C = OC0C on ATxmegas supporting OC0C, e.g. ATxmega128A1U + * IRSND_XMEGA_OC0D = OC0D on ATxmegas supporting OC0D, e.g. ATxmega128A1U + * IRSND_XMEGA_OC1A = OC1A on ATxmegas supporting OC1A, e.g. ATxmega128A1U + * IRSND_XMEGA_OC1B = OC1B on ATxmegas supporting OC1B, e.g. ATxmega128A1U + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#if defined(__AVR_XMEGA__) // XMEGA +# define IRSND_PORT_PRE PORTD +# define XMEGA_Timer TCD0 +# define IRSND_OCx IRSND_XMEGA_OC0B // use OC0B + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * AVR ATMega/ATTiny section: * * Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8 * IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88 @@ -85,36 +112,42 @@ * IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#if defined(ATMEL_AVR) +#elif defined(ATMEL_AVR) # define IRSND_OCx IRSND_OC2B // use OC2B /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * PIC C18 section: + * PIC C18 or XC8 section: * * Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ... * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ... *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#elif defined(PIC_C18) -# define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC +#elif defined(PIC_C18) // C18 or XC8 compiler +# if defined(__12F1840) // XC8 compiler +# define Pre_Scaler 1 // define prescaler for timer2 e.g. 1,4,16 +# define F_CPU 32000000UL // PIC frequency: set your freq here +# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value + +# else // C18 compiler +# define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC // change other PIC C18 specific settings: -# define F_CPU 48000000UL // PIC frequency: set your freq here -# define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16 -# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value -# warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself ! +# define F_CPU 48000000UL // PIC frequency: set your freq here +# define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16 +# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value +# endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * ARM STM32 section: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#elif defined (ARM_STM32) // use A6 as IR output on STM32 -# define IRSND_PORT_LETTER A +#elif defined (ARM_STM32) // use B6 as IR output on STM32 +# define IRSND_PORT_LETTER B # define IRSND_BIT_NUMBER 6 -# define IRSND_TIMER_NUMBER 10 +# define IRSND_TIMER_NUMBER 4 # define IRSND_TIMER_CHANNEL_NUMBER 1 // only channel 1 can be used at the moment, others won't work /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Other target system + * Other target systems *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif !defined (UNIX_OR_WINDOWS)