X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/46dd89b73055232942379e65afbb1dab5f95c445..2eab5ec941973a4e4a67728a1f2d9b9d7fdfc725:/irsndconfig.h

diff --git a/irsndconfig.h b/irsndconfig.h
index 597a1a9..56317bb 100644
--- a/irsndconfig.h
+++ b/irsndconfig.h
@@ -3,7 +3,7 @@
  *
  * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de
  *
- * $Id$
+ * $Id: irsndconfig.h,v 1.8 2010/06/15 15:47:21 fm Exp $
  *
  * ATMEGA88 @ 8 MHz
  *
@@ -14,6 +14,14 @@
  *---------------------------------------------------------------------------------------------------------------------------------------------------
  */
 
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef F_INTERRUPTS
+#define F_INTERRUPTS                            10000   // interrupts per second
+#endif
+
 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  * Change settings from 1 to 0 if you want to disable one or more encoders.
  * This saves program space.
@@ -27,30 +35,38 @@
 #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL       1       // flag: support Matsushita             uses ~150 bytes
 #define IRSND_SUPPORT_KASEIKYO_PROTOCOL         0       // flag: support Kaseikyo               NOT SUPPORTED YET!
 #define IRSND_SUPPORT_RECS80_PROTOCOL           1       // flag: support RECS80                 uses ~100 bytes
-#define IRSND_SUPPORT_RC5_PROTOCOL              1       // flag: support RC5                    uses ~250 bytes
+#define IRSND_SUPPORT_RC5_PROTOCOL              1       // flag: support RC5                    uses ~150 bytes
 #define IRSND_SUPPORT_DENON_PROTOCOL            1       // flag: support DENON                  uses ~200 bytes
 #define IRSND_SUPPORT_RC6_PROTOCOL              0       // flag: support RC6                    NOT SUPPORTED YET!
 #define IRSND_SUPPORT_RECS80EXT_PROTOCOL        1       // flag: support RECS80EXT              uses ~100 bytes
 #define IRSND_SUPPORT_NUBERT_PROTOCOL           1       // flag: support NUBERT                 uses ~100 bytes
 #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL     1       // flag: support Bang&Olufsen           uses ~250 bytes
-
+#define IRSND_SUPPORT_GRUNDIG_PROTOCOL          1       // flag: support Grundig                uses ~300 bytes
+#define IRSND_SUPPORT_NOKIA_PROTOCOL            1       // flag: support Nokia                  uses ~400 bytes
+#define IRSND_SUPPORT_FDC_PROTOCOL              1       // flag: support FDC infrared keyboard  uses ~150 bytes
+#define IRSND_SUPPORT_RCCAR_PROTOCOL            1       // flag: support RC CAR                 uses ~150 bytes
 
 /*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Change hardware pin here:
+ * THE FOLLOWING ENCODERS WORK ONLY FOR F_INTERRUPTS > 14500!
  *---------------------------------------------------------------------------------------------------------------------------------------------------
  */
-#if defined (__AVR_ATmega32__) || defined (__AVR_ATmega644P__)
-#define IRSND_PORT          PORTD                       // port D
-#define IRSND_DDR           DDRD                        // ddr D
-#define IRSND_BIT           7                           // OC2A
+#if F_INTERRUPTS >= 14500
+#define IRSND_SUPPORT_SIEMENS_PROTOCOL          1       // flag: support Siemens, e.g. Gigaset  uses ~150 bytes
 #else
-#define IRSND_PORT          PORTB                       // port B
-#define IRSND_DDR           DDRB                        // ddr B
-#define IRSND_BIT           3                           // OC2A
-#endif // __AVR...
+#define IRSND_SUPPORT_SIEMENS_PROTOCOL          0       // DO NOT CHANGE! F_INTERRUPTS too low!
+#endif
+
 
 /*---------------------------------------------------------------------------------------------------------------------------------------------------
- * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000
+ * Change hardware pin here:
  *---------------------------------------------------------------------------------------------------------------------------------------------------
  */
-#define F_INTERRUPTS                            10000   // interrupts per second
+#if defined (__AVR_ATmega32__) || defined (__AVR_ATmega644P__)
+#define IRSND_PORT                              PORTD   // port D
+#define IRSND_DDR                               DDRD    // ddr D
+#define IRSND_BIT                               7       // OC2A
+#else
+#define IRSND_PORT                              PORTB   // port B
+#define IRSND_DDR                               DDRB    // ddr B
+#define IRSND_BIT                               3       // OC2A
+#endif // __AVR...