X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/504d9df94cc82995d3da1a1b13956e13aae0e1f2..2eab5ec941973a4e4a67728a1f2d9b9d7fdfc725:/irmpconfig.h diff --git a/irmpconfig.h b/irmpconfig.h index bf0ad6a..255c3f6 100644 --- a/irmpconfig.h +++ b/irmpconfig.h @@ -3,7 +3,7 @@ * * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de * - * $Id: irmpconfig.h,v 1.2 2010/04/12 10:15:40 fm Exp $ + * $Id: irmpconfig.h,v 1.30 2010/06/25 09:04:43 fm Exp $ * * ATMEGA88 @ 8 MHz * @@ -18,30 +18,48 @@ #define _IRMPCONFIG_H_ /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000 + * Change F_INTERRUPTS if you change the number of interrupts per second, + * Normally, F_INTERRUPTS should be in the range from 10000 to 15000. + * A value above 15000 costs additional program space, absolut maximum value is 20000. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define F_INTERRUPTS 10000 // interrupts per second +#ifndef F_INTERRUPTS +#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000 +#endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change settings from 1 to 0 if you want to disable one or more decoders. * This saves program space. + * * 1 enable decoder * 0 disable decoder + * + * The standard decoders are enabled per default. + * Some less common protocols are disabled here, you need to enable them manually. + * + * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. + * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~100 bytes -#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes -#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes -#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes -#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes -#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~50 bytes -#define IRMP_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes -#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes -#define IRMP_SUPPORT_RC6_PROTOCOL 1 // flag: support RC6 uses ~200 bytes -#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~50 bytes -#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~50 bytes -#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang & Olufsen uses ~200 bytes + +// Protocol Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes +#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes +#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes +#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes +#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // support Kaseikyo >= 10000 ~50 bytes +#define IRMP_SUPPORT_DENON_PROTOCOL 1 // support DENON >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~200 bytes +#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~150 bytes +#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~150 bytes +#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes +#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes +#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5) +#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) +#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes +#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes +#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here: @@ -65,6 +83,20 @@ * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default) +#ifndef IRMP_LOGGING +#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default) +#endif + +#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000 +#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000) +#endif + +#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000 +#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000) +#endif + +#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000 +#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000) +#endif #endif /* _WC_IRMPCONFIG_H_ */