X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/7644ac04e209441d89d900125995b2d398cfd4b4..acd29fb9c846ac441a569186ab34a16a8ba7bb5a:/irsndconfig.h diff --git a/irsndconfig.h b/irsndconfig.h index 2bb4414..96037ce 100644 --- a/irsndconfig.h +++ b/irsndconfig.h @@ -1,9 +1,11 @@ /*--------------------------------------------------------------------------------------------------------------------------------------------------- * irsndconfig.h * + * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H! + * * Copyright (c) 2010-2011 Frank Meyer - frank(at)fli4l.de * - * $Id: irsndconfig.h,v 1.26 2011/09/11 13:17:38 fm Exp $ + * $Id: irsndconfig.h,v 1.38 2012/06/05 12:00:46 fm Exp $ * * ATMEGA88 @ 8 MHz * @@ -14,12 +16,19 @@ *--------------------------------------------------------------------------------------------------------------------------------------------------- */ +#ifndef _IRSNDCONFIG_H_ +#define _IRSNDCONFIG_H_ + +#if !defined(_IRSND_H_) +# error please include only irsnd.h, not irsndconfig.h +#endif + /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 20000, typically 15000 + * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS -#define F_INTERRUPTS 15000 // interrupts per second +# define F_INTERRUPTS 15000 // interrupts per second #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- @@ -31,11 +40,11 @@ */ // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space -#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes +#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~200 bytes #define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~100 bytes #define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes -#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~150 bytes +#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes #define IRSND_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~200 bytes // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space @@ -45,7 +54,7 @@ #define IRSND_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes #define IRSND_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~150 bytes #define IRSND_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes -#define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 DON'T CHANGE, NOT SUPPORTED YET! +#define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~250 bytes #define IRSND_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes #define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 ~150 bytes #define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~400 bytes @@ -59,25 +68,14 @@ #define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes #define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes #define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET! -#define IRSND_SUPPORT_IMON_PROTOCOL 0 // IMON keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes #define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes #define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 DON'T CHANGE, NOT SUPPORTED YET! #define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes - -/*--------------------------------------------------------------------------------------------------------------------------------------------------- - * DO NOT CHANGE: - *--------------------------------------------------------------------------------------------------------------------------------------------------- - */ -#define IRSND_OC2 0 // OC2 -#define IRSND_OC2A 1 // OC2A -#define IRSND_OC2B 2 // OC2B -#define IRSND_OC0 3 // OC0 -#define IRSND_OC0A 4 // OC0A -#define IRSND_OC0B 5 // OC0B - /*--------------------------------------------------------------------------------------------------------------------------------------------------- + * AVR section: + * * Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8 * IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88 * IRSND_OC2B = OC2B on ATmegas supporting OC2B, e.g. ATmega88 @@ -86,38 +84,48 @@ * IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define IRSND_OCx IRSND_OC2B // use OC2B +#if defined(ATMEL_AVR) +# define IRSND_OCx IRSND_OC2B // use OC2B /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Use Callbacks to indicate output signal or something else + * PIC C18 section: + * + * Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ... + * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ... *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0 +#elif defined(PIC_C18) +# define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC + // change other PIC C18 specific settings: +# define F_CPU 48000000UL // PIC frequency: set your freq here +# define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16 +# define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value +# warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself ! /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * D O N O T C H A N G E T H E F O L L O W I N G L I N E S ! + * ARM STM32 section: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#if IRSND_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000 -#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000) -#undef IRSND_SUPPORT_SIEMENS_PROTOCOL -#define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#endif +#elif defined (ARM_STM32) // use A6 as IR output on STM32 +# define IRSND_PORT_LETTER A +# define IRSND_BIT_NUMBER 6 +# define IRSND_TIMER_NUMBER 10 +# define IRSND_TIMER_CHANNEL_NUMBER 1 // only channel 1 can be used at the moment, others won't work -#if IRSND_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000 -#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000) -#undef IRSND_SUPPORT_RECS80_PROTOCOL -#define IRSND_SUPPORT_RECS80_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Other target system + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif !defined (UNIX_OR_WINDOWS) +# error target system not defined. #endif -#if IRSND_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000 -#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000) -#undef IRSND_SUPPORT_RECS80EXT_PROTOCOL -#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Use Callbacks to indicate output signal or something else + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRSND_USE_CALLBACK +# define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0 #endif -#if IRSND_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000 -#warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000) -#undef IRSND_SUPPORT_LEGO_PROTOCOL -#define IRSND_SUPPORT_LEGO_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#endif +#endif // _IRSNDCONFIG_H_