X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/9e16d6996dd343a83a0a34d2d39c5dbd5abd3705..80b3a55d38a7b0b58735f7715ef69134798fca6c:/irmp.h diff --git a/irmp.h b/irmp.h index 91ff09c..faa4201 100644 --- a/irmp.h +++ b/irmp.h @@ -1,9 +1,9 @@ /*--------------------------------------------------------------------------------------------------------------------------------------------------- * irmp.h * - * Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de + * Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de * - * $Id: irmp.h,v 1.31 2010/06/12 20:29:44 fm Exp $ + * $Id: irmp.h,v 1.86 2014/07/09 15:26:02 fm Exp $ * * ATMEGA88 @ 8 MHz * @@ -14,360 +14,175 @@ *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#ifndef _WC_IRMP_H_ -#define _WC_IRMP_H_ +#ifndef _IRMP_H_ +#define _IRMP_H_ -#ifdef __cplusplus -extern "C" -{ -#endif - -/*--------------------------------------------------------------------------------------------------------------------------------------------------- - * IR protocols - *--------------------------------------------------------------------------------------------------------------------------------------------------- - */ -#define IRMP_SIRCS_PROTOCOL 1 // Sony -#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc. -#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung -#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita -#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc) -#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba -#define IRMP_RC5_PROTOCOL 7 // Philips etc -#define IRMP_DENON_PROTOCOL 8 // Denon -#define IRMP_RC6_PROTOCOL 9 // Philips etc -#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37 -#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC -#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba -#define IRMP_NUBERT_PROTOCOL 13 // Nubert -#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen -#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig -#define IRMP_NOKIA_PROTOCOL 16 // Nokia -#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset -#define IRMP_FDC1_PROTOCOL 18 // FDC keyboard - protocol 1 -#define IRMP_FDC2_PROTOCOL 19 // FDC keyboard - protocol 2 -#define IRMP_RCCAR_PROTOCOL 20 // RC Car - -// some flags of struct IRMP_PARAMETER: -#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01 -#define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02 - -#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse -#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause -#define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse -#define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse -#define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause -#define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times -#define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms -#define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms -#define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits -#define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits -#define SIRCS_COMMAND_OFFSET 0 // skip 0 bits -#define SIRCS_COMMAND_LEN 15 // read 12-15 command bits -#define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length -#define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20 -#define SIRCS_STOP_BIT 0 // has no stop bit -#define SIRCS_LSB 1 // LSB...MSB -#define SIRCS_FLAGS 0 // flags - -#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse -#define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause -#define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause -#define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse -#define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause -#define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause -#define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms -#define NEC_ADDRESS_OFFSET 0 // skip 0 bits -#define NEC_ADDRESS_LEN 16 // read 16 address bits -#define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address) -#define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command) -#define NEC_COMPLETE_DATA_LEN 32 // complete length -#define NEC_STOP_BIT 1 // has stop bit -#define NEC_LSB 1 // LSB...MSB -#define NEC_FLAGS 0 // flags - -#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse -#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause -#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse -#define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause -#define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause -#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits -#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits -#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit -#define SAMSUNG_ID_LEN 4 // read 4 id bits -#define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits -#define SAMSUNG_COMMAND_LEN 16 // read 16 command bits -#define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length -#define SAMSUNG_STOP_BIT 1 // has stop bit -#define SAMSUNG_LSB 1 // LSB...MSB? -#define SAMSUNG_FLAGS 0 // flags +#include "irmpsystem.h" -#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits -#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits -#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length -#define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times -#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms -#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms - -#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse -#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause -#define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse -#define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause -#define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause -#define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits -#define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits -#define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits -#define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command) -#define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length -#define MATSUSHITA_STOP_BIT 1 // has stop bit -#define MATSUSHITA_LSB 1 // LSB...MSB? -#define MATSUSHITA_FLAGS 0 // flags - -#define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse -#define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause -#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse -#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause -#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause -#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits -#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits -#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre) -#define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id) -#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length -#define KASEIKYO_STOP_BIT 1 // has stop bit -#define KASEIKYO_LSB 1 // LSB...MSB? -#define KASEIKYO_FLAGS 0 // flags - -#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse -#define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause -#define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse -#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause -#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause -#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) -#define RECS80_ADDRESS_LEN 3 // read 3 address bits -#define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address) -#define RECS80_COMMAND_LEN 6 // read 6 command bits -#define RECS80_COMPLETE_DATA_LEN 11 // complete length -#define RECS80_STOP_BIT 1 // has stop bit -#define RECS80_LSB 0 // MSB...LSB -#define RECS80_FLAGS 0 // flags +#ifndef IRMP_USE_AS_LIB +# include "irmpconfig.h" +#endif -#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause -#define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) -#define RC5_ADDRESS_LEN 5 // read 5 address bits -#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address) -#define RC5_COMMAND_LEN 6 // read 6 command bits -#define RC5_COMPLETE_DATA_LEN 13 // complete length -#define RC5_STOP_BIT 0 // has no stop bit -#define RC5_LSB 0 // MSB...LSB -#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags +#if defined (ATMEL_AVR) +# define _CONCAT(a,b) a##b +# define CONCAT(a,b) _CONCAT(a,b) +# define IRMP_PORT CONCAT(PORT, IRMP_PORT_LETTER) +# define IRMP_DDR CONCAT(DDR, IRMP_PORT_LETTER) +# define IRMP_PIN CONCAT(PIN, IRMP_PORT_LETTER) +# define IRMP_BIT IRMP_BIT_NUMBER +# define input(x) ((x) & (1 << IRMP_BIT)) +#elif defined (PIC_C18) +# define input(x) (x) +#elif defined (PIC_CCS) +# define input(x) (x) +#elif defined (ARM_STM32) +# define _CONCAT(a,b) a##b +# define CONCAT(a,b) _CONCAT(a,b) +# define IRMP_PORT CONCAT(GPIO, IRMP_PORT_LETTER) +# if defined (ARM_STM32L1XX) +# define IRMP_PORT_RCC CONCAT(RCC_AHBPeriph_GPIO, IRMP_PORT_LETTER) +# elif defined (ARM_STM32F10X) +# define IRMP_PORT_RCC CONCAT(RCC_APB2Periph_GPIO, IRMP_PORT_LETTER) +# elif defined (ARM_STM32F4XX) +# define IRMP_PORT_RCC CONCAT(RCC_AHB1Periph_GPIO, IRMP_PORT_LETTER) +# endif +# define IRMP_BIT CONCAT(GPIO_Pin_, IRMP_BIT_NUMBER) +# define IRMP_PIN IRMP_PORT // for use with input(x) below +# define input(x) (GPIO_ReadInputDataBit(x, IRMP_BIT)) +# ifndef USE_STDPERIPH_DRIVER +# warning The STM32 port of IRMP uses the ST standard peripheral drivers which are not enabled in your build configuration. +# endif +#elif defined (STELLARIS_ARM_CORTEX_M4) +# define _CONCAT(a,b) a##b +# define CONCAT(a,b) _CONCAT(a,b) +# define IRMP_PORT_PERIPH CONCAT(SYSCTL_PERIPH_GPIO, IRMP_PORT_LETTER) +# define IRMP_PORT_BASE CONCAT(GPIO_PORT, CONCAT(IRMP_PORT_LETTER, _BASE)) +# define IRMP_PORT_PIN CONCAT(GPIO_PIN_, IRMP_BIT_NUMBER) +# define IRMP_PIN IRMP_PORT_PIN +# define input(x) ((uint8_t)(ROM_GPIOPinRead(IRMP_PORT_BASE, IRMP_PORT_PIN))) +# define sei() IntMasterEnable() +#endif -#define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse -#define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause -#define DENON_0_PAUSE_TIME 775.0e-6 // 775 usec pause -#define DENON_FRAMES 2 // DENON sends each frame 2 times -#define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms -#define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms -#define DENON_ADDRESS_OFFSET 0 // skip 0 bits -#define DENON_ADDRESS_LEN 5 // read 5 address bits -#define DENON_COMMAND_OFFSET 5 // skip 5 -#define DENON_COMMAND_LEN 10 // read 10 command bits -#define DENON_COMPLETE_DATA_LEN 15 // complete length -#define DENON_STOP_BIT 1 // has stop bit -#define DENON_LSB 0 // MSB...LSB -#define DENON_FLAGS 0 // flags +#if IRMP_SUPPORT_DENON_PROTOCOL == 1 && IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 +# warning DENON protocol conflicts wih RUWIDO, please enable only one of both protocols +# warning RUWIDO protocol disabled +# undef IRMP_SUPPORT_RUWIDO_PROTOCOL +# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 +#endif -#define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse -#define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause -#define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause -#define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause -#define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit -#define RC6_ADDRESS_LEN 8 // read 8 address bits -#define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address) -#define RC6_COMMAND_LEN 8 // read 8 command bits -#define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length -#define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length -#define RC6_STOP_BIT 0 // has no stop bit -#define RC6_LSB 0 // MSB...LSB -#define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags +#if IRMP_SUPPORT_RC6_PROTOCOL == 1 && IRMP_SUPPORT_ROOMBA_PROTOCOL == 1 +# warning RC6 protocol conflicts wih ROOMBA, please enable only one of both protocols +# warning ROOMBA protocol disabled +# undef IRMP_SUPPORT_ROOMBA_PROTOCOL +# define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 +#endif -#define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse -#define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause -#define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse -#define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause -#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause -#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) -#define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits -#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address) -#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits -#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length -#define RECS80EXT_STOP_BIT 1 // has stop bit -#define RECS80EXT_LSB 0 // MSB...LSB -#define RECS80EXT_FLAGS 0 // flags +#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_ORTEK_PROTOCOL == 1 +# warning RC5 protocol conflicts wih ORTEK, please enable only one of both protocols +# warning ORTEK protocol disabled +# undef IRMP_SUPPORT_ORTEK_PROTOCOL +# define IRMP_SUPPORT_ORTEK_PROTOCOL 0 +#endif -#define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse -#define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause -#define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse -#define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause -#define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse -#define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause -#define NUBERT_FRAMES 2 // Nubert sends 2 frames -#define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms -#define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms -#define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits -#define NUBERT_ADDRESS_LEN 0 // read 0 address bits -#define NUBERT_COMMAND_OFFSET 0 // skip 0 bits -#define NUBERT_COMMAND_LEN 10 // read 10 bits -#define NUBERT_COMPLETE_DATA_LEN 10 // complete length -#define NUBERT_STOP_BIT 1 // has stop bit -#define NUBERT_LSB 0 // MSB? -#define NUBERT_FLAGS 0 // flags +#if IRMP_SUPPORT_FDC_PROTOCOL == 1 && IRMP_SUPPORT_ORTEK_PROTOCOL == 1 +# warning FDC protocol conflicts wih ORTEK, please enable only one of both protocols +# warning ORTEK protocol disabled +# undef IRMP_SUPPORT_ORTEK_PROTOCOL +# define IRMP_SUPPORT_ORTEK_PROTOCOL 0 +#endif -#define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse -#define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause -#define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse -#define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause -#define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse -#define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause -#define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse -#define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause -#define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse -#define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause -#define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause -#define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit) -#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit) -#define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits -#define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits -#define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4 -#define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits -#define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit -#define BANG_OLUFSEN_STOP_BIT 1 // has stop bit -#define BANG_OLUFSEN_LSB 0 // MSB...LSB -#define BANG_OLUFSEN_FLAGS 0 // flags +#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1 && IRMP_SUPPORT_NETBOX_PROTOCOL == 1 +# warning ORTEK protocol conflicts wih NETBOX, please enable only one of both protocols +# warning NETBOX protocol disabled +# undef IRMP_SUPPORT_NETBOX_PROTOCOL +# define IRMP_SUPPORT_NETBOX_PROTOCOL 0 +#endif -#define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause -#define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit -#define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms -#define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit -#define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB -#define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags +#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_SIEMENS_PROTOCOL +# define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 +#endif -#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times -#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms -#define GRUNDIG_ADDRESS_OFFSET 0 // no address -#define GRUNDIG_ADDRESS_LEN 0 // no address -#define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit -#define GRUNDIG_COMMAND_LEN 9 // read 9 command bits -#define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits +#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_RUWIDO_PROTOCOL +# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 +#endif -#define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times -#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms -#define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits) -#define NOKIA_ADDRESS_LEN 8 // 7 address bits -#define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit) -#define NOKIA_COMMAND_LEN 8 // read 8 command bits -#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits +#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_RECS80_PROTOCOL +# define IRMP_SUPPORT_RECS80_PROTOCOL 0 +#endif -#define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause -#define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms -#define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits -#define SIEMENS_ADDRESS_LEN 12 // read 12 address bits -#define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit) -#define SIEMENS_COMMAND_LEN 7 // read 7 command bits -#define SIEMENS_COMPLETE_DATA_LEN 23 // complete length -#define SIEMENS_STOP_BIT 0 // has no stop bit -#define SIEMENS_LSB 0 // MSB...LSB -#define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags +#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_RECS80EXT_PROTOCOL +# define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 +#endif -#define FDC1_START_BIT_PULSE_TIME 1390.0e-6 // 1390 usec pulse -#define FDC1_START_BIT_PAUSE_TIME 640.0e-6 // 640 usec pause -#define FDC1_PULSE_TIME 200.0e-6 // 200 usec pulse -#define FDC1_1_PAUSE_TIME 475.0e-6 // 475 usec pause -#define FDC1_0_PAUSE_TIME 145.0e-6 // 145 usec pause -#define FDC1_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms -#define FDC1_ADDRESS_OFFSET 0 // skip 0 bits -#define FDC1_ADDRESS_LEN 8 // read 8 address bits -#define FDC1_COMMAND_OFFSET 24 // skip 24 bits (8 address bits + 12 status bits + 4 repeat bits) -#define FDC1_COMMAND_LEN 8 // read 8 bits -#define FDC1_COMPLETE_DATA_LEN 40 // complete length -#define FDC1_STOP_BIT 1 // has stop bit -#define FDC1_LSB 1 // LSB...MSB -#define FDC1_FLAGS 0 // flags +#if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000 +# warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000) +# undef IRMP_SUPPORT_LEGO_PROTOCOL +# define IRMP_SUPPORT_LEGO_PROTOCOL 0 +#endif -#define FDC2_START_BIT_PULSE_TIME 2120.0e-6 // 2120 usec pulse -#define FDC2_START_BIT_PAUSE_TIME 900.0e-6 // 900 usec pause -#define FDC2_PULSE_TIME 360.0e-6 // 360 usec pulse -#define FDC2_1_PAUSE_TIME 650.0e-6 // 650 usec pause -#define FDC2_0_PAUSE_TIME 180.0e-6 // 180 usec pause -#define FDC2_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms -#define FDC2_ADDRESS_OFFSET 0 // skip 0 bits -#define FDC2_ADDRESS_LEN 8 // read 8 address bits -#define FDC2_COMMAND_OFFSET 24 // skip 24 bits (8 address bits + 12 status bits + 4 repeat bits) -#define FDC2_COMMAND_LEN 8 // read 8 bits -#define FDC2_COMPLETE_DATA_LEN 40 // complete length -#define FDC2_STOP_BIT 1 // has stop bit -#define FDC2_LSB 1 // LSB...MSB -#define FDC2_FLAGS 0 // flags +#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1 && IRMP_SUPPORT_SAMSUNG_PROTOCOL == 0 +# warning SAMSUNG48 protocol needs also SAMSUNG protocol, SAMSUNG protocol enabled +# undef IRMP_SUPPORT_SAMSUNG_PROTOCOL +# define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 +#endif -#define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse -#define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause -#define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse -#define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause -#define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause -#define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms -#define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits -#define RCCAR_ADDRESS_LEN 0 // read 8 address bits -#define RCCAR_COMMAND_OFFSET 0 // skip 24 bits (8 address bits + 12 status bits + 4 repeat bits) -#define RCCAR_COMMAND_LEN 13 // read 8 bits -#define RCCAR_COMPLETE_DATA_LEN 13 // complete length -#define RCCAR_STOP_BIT 1 // has stop bit -#define RCCAR_LSB 0 // LSB...MSB -#define RCCAR_FLAGS 0 // flags +#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +# warning JVC protocol needs also NEC protocol, NEC protocol enabled +# undef IRMP_SUPPORT_NEC_PROTOCOL +# define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif -#define AUTO_FRAME_REPETITION_TIME 50.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms +#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +# warning NEC16 protocol needs also NEC protocol, NEC protocol enabled +# undef IRMP_SUPPORT_NEC_PROTOCOL +# define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif -#define TRUE 1 -#define FALSE 0 +#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +# warning NEC42 protocol needs also NEC protocol, NEC protocol enabled +# undef IRMP_SUPPORT_NEC_PROTOCOL +# define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif -#define IRMP_FLAG_REPETITION 0x01 +#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +# warning LGAIR protocol needs also NEC protocol, NEC protocol enabled +# undef IRMP_SUPPORT_NEC_PROTOCOL +# define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif -typedef struct -{ - uint8_t protocol; // protocol, i.e. NEC_PROTOCOL - uint16_t address; // address - uint16_t command; // command - uint8_t flags; // flags, e.g. repetition -} IRMP_DATA; +#if IRMP_SUPPORT_RCMM_PROTOCOL == 1 && F_INTERRUPTS < 20000 +# warning F_INTERRUPTS too low, RCMM protocol disabled (should be at least 20000) +# undef IRMP_SUPPORT_RCMM_PROTOCOL +# define IRMP_SUPPORT_RCMM_PROTOCOL 0 +#endif +#if F_INTERRUPTS > 20000 +#error F_INTERRUPTS too high (should be not greater than 20000) +#endif -/** - * Initialize IRMP decoder - * @details Configures IRMP input pin - */ -extern void irmp_init (void); +#include "irmpprotocols.h" -/** - * Get IRMP data - * @details gets decoded IRMP data - * @param pointer in order to store IRMP data - * @return TRUE: successful, FALSE: failed - */ -extern uint8_t irmp_get_data (IRMP_DATA *); +#define IRMP_FLAG_REPETITION 0x01 -/** - * ISR routine - * @details ISR routine, called 10000 times per second - */ -extern uint8_t irmp_ISR (void); +extern void irmp_init (void); +extern uint8_t irmp_get_data (IRMP_DATA *); +extern uint8_t irmp_is_busy (void); +extern uint8_t irmp_ISR (void); -#ifdef __cplusplus -} +#if IRMP_PROTOCOL_NAMES == 1 +extern char * irmp_protocol_names[IRMP_N_PROTOCOLS + 1]; #endif -#endif /* _WC_IRMP_H_ */ +#if IRMP_USE_CALLBACK == 1 +extern void irmp_set_callback_ptr (void (*cb)(uint8_t)); +#endif // IRMP_USE_CALLBACK == 1 + +#endif /* _IRMP_H_ */