X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/a7054daf46ab0ee2310b26be519161d5a0320211..66c864ba3d7b8d0b81574be0a1ace68fcf77c577:/irmpconfig.h diff --git a/irmpconfig.h b/irmpconfig.h index 9954398..a34aebb 100644 --- a/irmpconfig.h +++ b/irmpconfig.h @@ -3,7 +3,7 @@ * * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de * - * $Id: irmpconfig.h,v 1.8 2010/05/28 11:23:19 fm Exp $ + * $Id: irmpconfig.h,v 1.64 2011/03/10 12:54:37 fm Exp $ * * ATMEGA88 @ 8 MHz * @@ -18,33 +18,59 @@ #define _IRMPCONFIG_H_ /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000 + * Change F_INTERRUPTS if you change the number of interrupts per second, + * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000 + * A value above 15000 costs additional program space, absolute maximum value is 20000. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define F_INTERRUPTS 10000 // interrupts per second +#ifndef F_INTERRUPTS +#define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000 +#endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change settings from 1 to 0 if you want to disable one or more decoders. * This saves program space. + * * 1 enable decoder * 0 disable decoder + * + * The standard decoders are enabled per default. + * Less common protocols are disabled here, you need to enable them manually. + * + * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. + * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~100 bytes -#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes -#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes -#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes -#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes -#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~50 bytes -#define IRMP_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes -#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes -#define IRMP_SUPPORT_RC6_PROTOCOL 1 // flag: support RC6 uses ~200 bytes -#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~50 bytes -#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~50 bytes -#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang & Olufsen uses ~200 bytes -#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // flag: support Grundig uses ~150 bytes -#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // flag: support Nokia uses ~150 bytes -#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // flag: support Siemens Gigaset uses ~150 bytes + +// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes +#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes +#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes +#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes +#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes + +// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes +#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~50 bytes +#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes +#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes +#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes +#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes +#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes +#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes +#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes +#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes +#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes +#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!) +#define IRMP_SUPPORT_IMON_PROTOCOL 0 // IMON keyboard >= 10000 ~400 bytes (PROTOTYPE!) +#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5) +#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) +#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes +#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes +#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes +#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here: @@ -68,6 +94,58 @@ * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default) +#ifndef IRMP_LOGGING +#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default) +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * DO NOT CHANGE THE FOLLOWING LINES ! + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000 +#warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000) +#undef IRMP_SUPPORT_SIEMENS_PROTOCOL +#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000 +#warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000) +#undef IRMP_SUPPORT_RUWIDO_PROTOCOL +#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000 +#warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000) +#undef IRMP_SUPPORT_RECS80_PROTOCOL +#define IRMP_SUPPORT_RECS80_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000 +#warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000) +#undef IRMP_SUPPORT_RECS80EXT_PROTOCOL +#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +#warning JVC protocol needs also NEC protocol, NEC protocol enabled +#undef IRMP_SUPPORT_NEC_PROTOCOL +#define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif + +#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +#warning NEC16 protocol needs also NEC protocol, NEC protocol enabled +#undef IRMP_SUPPORT_NEC_PROTOCOL +#define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif + +#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +#warning NEC42 protocol needs also NEC protocol, NEC protocol enabled +#undef IRMP_SUPPORT_NEC_PROTOCOL +#define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif + +#if F_INTERRUPTS > 20000 +#error F_INTERRUPTS too high (should be not greater than 20000) +#endif #endif /* _WC_IRMPCONFIG_H_ */